Separation of physical loading from photosynthesis/respiration processes in rivers by mass balance

Diurnal variations in physical and chemical concentrations, including nutrients, are observed in river ecosystems. Understanding these cycles and separating the effects of physical loading (from point and non-point sources) and biogeochemical processes are necessary for water management and the TMDL process. A chloride mass balance approach is used to separate the relative influences of physical loading and biogeochemical processes in the Bow River through Calgary, Canada, which has a significant influence on the river water chemistry. Sampling campaigns were conducted in December 2005, when minimal photosynthesis and respiration occur, and in July 2006, when river discharge is high and some photosynthesis and respiration activity is present. Samples in each campaign were collected at point source input and output along the river reach through the city every hour for a 24-hour period, allowing for time of travel. The two wastewater treatment facilities within the city contributed the majority of physical mass loading to the river, with temporal variations in effluent discharge, chloride, and nutrient concentrations. Wastewater effluent chloride to nutrient (as well as other parameter relationships) concentrations also varied diurnally. An hourly chloride mass balance was achieved, within 0.5% (average, S.D.=4.4) for December and 7.7% (average, S.D.=4.2) for July, between estimated cumulative sum values from all inputs and measured values at the river output downgradient of the city, allowing for the investigation of other parameter conservativeness. Some slight diurnal variations associated with photosynthesis and respiration were observed even with limited productivity in the river. Nitrate mass fluxes appeared to be most strongly influenced by photosynthesis and respiration processes, with phosphate being less influenced. Ammonia mass fluxes appeared to be most strongly influenced by wastewater effluent loading. Physical loading can mask or enhance biogeochemical diurnal fluctuations, creating errors in river process interpretations. Chloride was a useful tracer in the mass balance to distinguish between and assist in separating physical loading and biogeochemical processes in the river.     

Interaction of bacteriophage R17 and reovirus type III with the clay mineral allophane

A study has been made of the adsorption of bacteriophage R17 and reovirus type 3 by the amorphous aluminosilicate clay mineral allophane. In agreement with previous studies of virus adsorption to other minerals such as montmorillonite and aluminium hydroxide, the principal factors influencing adsorption were found to be mixing time, pH and the concentrations and isoelectric points of both the virus and the absorbent. However, allophane was found to be a much better adsorbent for reovirus and R17 over the pH range 5–7, the natural pH range of many fresh waters.By using highly purified radioactive reovirus it was possible to follow both the distribution of radioactive virus in a clay suspension and the specific infectivity of the virus. This study revealed that when adsorbed virus was eluted by neutral phosphate solutions it retained its physical integrity but was of a lower specific infectivity.     

Chlorine disappearance in sea-water

A series of chlorination studies were carried out on natural and artificial sea-water. It was determined that both the forward and back titration procedures accurately described the two phases of chlorine losses in sea-water: a rapid initial loss followed by a continuous loss at a sharply reduced rate. The order of adding the iodide and buffer reagents was found to be crucial in affecting the rapid initial loss. The initial loss was found to reach a saturation level that varied widely between natural sea-water samples and appeared to be related to a true organic demand. In contrast, the second phase was difficult to explain. Losses continued over 10 day periods and were pronounced in both natural and artificial sea-water containing bromide. In the absence of bromide, long term losses in artificial sea-water were greatly reduced, indicating that the lost applied chlorine was associated with the bromine chemical system in sea-water. The fate of the lost chlorine was not determined and the untitratable halogen compounds must remain suspect as potential biocides.     

Air monitoring network program in Saudi Arabia

The Kingdom of Saudi Arabia has initiated a program to install air quality network stations throughout the country in order to measure concentration of the ambient air pollutants. The site selection of these stations is an important objective to be accomplished and must be done based on scientific and rational work. To accomplish this objective, a modified version of atmospheric transport and dispersion model, known as air resources laboratories - atmospheric transport and dispersion (ARLATAD) model, is used to evaluate long range transport and diffusion of air pollutants from major pollution causing sources such as refineries, open-air burning of associated gases of oil fields and major industries.Hourly meteorological data for a period of three years (from 1977 to 1979) on wind speed, wind direction, pressure, and temperature from 20 synoptic stations in Saudi Arabia is processed and used as model input. In addition to these, meteorological data from three upper air stations is also processed in order to determine base and top of critical inversion heights.Various pollution causing sources are identified within the study area. Air trajectories are drawn with sources as the origins of the trajectories and the dispersion characteristics is studied with distance and time. Based on long term meteorological records, the adversely affected zones are statistically identified for potential station sites.     

A new approach for simulating aerodynamic vibrations of structures in a wind tunnel—development of an experimental system by means of hybrid vibration technique

The present paper describes a newly proposed technique for simulating aerodynamic vibration of structures, which is referred to as the hybrid vibration technique or HVT. This technique is a combination of step-by-step computer calculation and measurement of the aerodynamic force acting on a model structure in a wind tunnel test. Even though the HVT can be applied effectively, problems still exist with respect to obtaining accurate simulations. These problems include response delay in controlling the model behavior and the inertia force component present in the measured aerodynamic force. Techniques for compensating for response delay and for eliminating inertia force from measured aerodynamic force are applied to a developed system based on HVT simulations of aerodynamic vibration of elastic structures and structures exhibiting elasto-plastic behavior are performed by means of the newly developed system. The effectiveness of the techniques for compensating for the response delay and eliminating the inertia force can be confirmed from the results of the simulations. In addition, the possibility and applicability of HVT is indicated.     

A steady-state model for the rotating biological disc reactor

A steady-state model for substrate removal in a rotating biological disc reactor is presented. The model considers the consumption of substrate by micro-organisms in the biofilm attached to the rotating disc, and mass transfer from the attached liquid film to the biofilm. A mass balance on substrate over the liquid in the trough provides an expression for effluent substrate in terms of the microbial kinetic constants, the geometry of the system and the operating conditions. In order to simplify the solution of the equations in the model, first order kinetics are assumed for the rate of microbial growth and substrate utilization. This simplified model can be solved, for example, by using a programmable calculator. The model predicts that the fractional removal of substrate per stage is strongly dependent on the hydraulic loading rate per unit disc area but independent of feed substrate concentration. It predicts constant removal independent of disc size provided the hydraulic loading per unit area is kept constant. The rotational speed has only a slight predicted effect on the rate of substrate removal. The predictions of the model are compared with published data from the literature for both domestic wastewater and some industrial wastes. Trends observed in the field are predicted qualitatively by the model.     

Canadian Housing Policy In The Nineties

The last decade has witnessed an extraordinary shift in housing policy in Canada. Responsibility for social housing has been devoluted from the federal government to theprovincial and territorial governments, who in turn shift administration and manangement to regional and municipal agencies. And while the proportion of needy families is increasing, the deficit-minded Federal government only maintains its financial commitments to existing projects with no new funds presently available. Market solutions are being promoted by both the public and private sectors through a wide range of activities. The result is no single housing policy, but a patchwork of provincial and local initiatives.     

Spatial and temporal trends of petroleum hydrocarbons in wild mussels from the Galician coast (NW Spain) affected by the Prestige oil spill

Polycyclic aromatic hydrocarbons (PAHs) were determined in tissues of wild mussels (Mytilus galloprovincialis) from the Galicia coast (NW Spain) in order to assess the extent of the environmental impact caused by the Prestige oil spill (November 13, 2002). Three sampling campaigns were carried out in February, June and November 2003 at 24 stations along the Galicia coast, from La Guardia (Pontevedra) to Ribadeo (Lugo). The spatial distribution of PAHs found in the first sampling period, clearly revealed the central area (Costa da Morte) as the most affected by the oil spill. In these stations, concentrations up to 7780 microg/kg dw of the sum of 13 parent PAHs were found 2-3 months after the spill. Molecular parameters within the aliphatic and aromatic fractions confirmed the presence of the Prestige oil in these samples. The levels markedly decreased at most of the stations in the second sampling and recovered to levels found before the spill in November 2003, 1 year after the accident (29-279 microg/kg dw, av. 133+/-83 microg/kg dw). However, a certain increase was observed in some sites which could be related to the remobilization of oil residues from still unclean intertidal spots or sediments due to the winter marine weather conditions.