Nanolayered lightweight flexible shields with multidirectional optical transparency

New nanolayered coatings are designed and deposited on flexible plastic substrate having the thickness of 100 /spl mu/m, in order to realize lightweight ultrathin transparent shielding foils. The structure of the coating is optimized considering three figures of merit: the average transmittance in the visible range for normal incidence, the normalized average transmittance for oblique incidence at 550 nm, and the transmittance quality factor. The nanotechnology exploited for the deposition of the transparent metals is the dual ion beam sputtering. Tests of durability, optical transmission, and shielding effectiveness demonstrate that the film has a high adhesion under mechanical solicitation, high resistance against aging, peak transmittance in the visible range higher than 70%, omnidirectional properties in the range 0/spl deg/-60/spl deg/, and shielding effectiveness of 40 dB up to 6 GHz.     

Thermal-lens and photo-acoustic methods for the determination of SiC thermal properties

In this paper we report the use of photothermal techniques such as Thermal lens (TL) spectrometry, Photoacoustic and heat capacity, ρc_p, to determine the thermo-optical parameters, such as thermal conductivity (K), thermal diffusivity (D), specific heat (c_p) and the optical path dependence with temperature (ds/dT), of an undoped polycrystalline 3C-SiC. To our knowledge, this is the first time that Thermal lens technique is used for wide band-gap systems. Results obtained for the polycrystalline sample with TL technique indicates that ds/dT is negative at room temperature. Moreover, the obtained values of thermal diffusivity and thermal conductivity are in good agreement with that found in the literature, indicating that the phototermal techniques can be used to obtain the referred parameters in circumstances where other techniques cannot be used, for example, in harsh environments.     

Bipolar mechanisms present in short channel SOI-MOSFET transistors

The set of physical mechanisms present in the body of SOI MOS transistors has been presented. Selected bipolar aspects of physical phenomena usually oversimplified in existing SOI MOS models have been analyzed. The action of parasitic bipolar transistor present in the body of SOI MOS transistor is one of them and seems to become especially important as transistor channel dimensions are reduced.     

The U.S. role in global internet governance

Who should control the Internet? A dozen years after the Internet became a mass medium, this issue has continued to grow in urgency, becoming white hot in fall 2005. At the September 2005 preparatory meeting for the UN World Summit on the Information Society (WSIS), a coalition of countries criticized the United States' unilateral control of the Internet's domain name system (DNS) and proposed the establishment of a multinational Council to supervise it. This proposal emerged from the Final Report of the UN Working Group on Internet Governance. Researchers from the Internet Governance Project, a university-based consortium for policy analysis, have concluded that the United States should internationalize governance of the Internet, but in a way that avoids intrusive, centralized control.     

Measurement of the working parameters of an air-post vertical-cavity surface-emitting laser

We present a complete experimental evaluation of the effective parameters necessary to describe the dynamical behavior of an air-post vertical-cavity surface-emitting lasers, on the basis of theoretical equations which are also derived in this paper. The experimental investigation is composed of several steps, including power versus current measurement, noise spectrum analysis, linewidth evaluation. The complete set of parameters derived, in particular the linewidth-enhancement factor and the spontaneous emission factor, is particularly important for accurate comparisons of theoretical models on the laser dynamics with experiments.     

A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

"Interactive use of lexical information in speech perception": Correction to Connine and Clifton.

Reports an error in "Interactive use of lexical information in speech perception" by Cynthia M. Connine and Charles Clifton (Journal of Experimental Psychology: Human Perception and Performance, 1987[May], Vol 13[2], 291-299). In the aforementioned article, Figures 1 and 2 were inadvertently transposed. The figure on p. 294 is actually Figure 2, and the figure on p. 296 is actually Figure 1. The captions are correct as they stand. (The following abstract of the original article appeared in record 1987-23984-001.) Two experiments are reported that demonstrate contextual effects on identification of speech voicing continua. Experiment 1 demonstrated the infuence of lexical knowledge on identification of ambiguous tokens from word–nonword and nonword–word continua. Reaction times for word and nonword responses showed a word advantage only for ambiguous stimulus tokens (at the category boundary); no word advantage was found for clear stimuli (at the continua endpoints). Experiment 2 demonstrated an effect of a postperceptual variable, monetary payoff, on nonword–nonword continua. Identification responses were influenced by monetary payoff, but reaction times for bias-consistent and bias-inconsistent responses did not differ at the category boundary. An advantage for bias-consistent responses was evident at the continua endpoints. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Antimony activities in copper mattes

A mass spectrometric technique combined with a double Knudsen cell was used to determine the antimony and copper activities in the Cu-Sb binary system at 1373 K and in the two-melt composition range of the Cu−S−Sb ternary system at 1423 K. The antimony and copper activities were calculated based on the intensity ration of the gaseous Sb and Cu species, over the unknown and known activity samples, respectively. γ _Sb ^o were found to be 1.1×10⁻² in molten copper at 1373 K, and 1.8×10⁻² and 0.44 in a copper-rich phase and in a matter phase, of the Cu−S−Sb ternary system at 1423 K, respectively. These values indicate, that antimony can be removed during the matte smelting and slagging stage of the copper smelting process. Interaction parameters of antimony in molten copper slagging stage of the copper smelting process. Interaction parameters of antimony in molten copper at 1423 K were calculated and found to be 10.7, −5.4, and 6.3 for ε _Sb ^Sb · ρ_Sb ^Sb, and ε _Sb ^S , respectively. M. HINO, formerly Visiting Scientist at the University of Toronto     

Coding approaches to fault tolerance in linear dynamic systems

This paper discusses fault tolerance in discrete-time dynamic systems, such as finite-state controllers or computer simulations, with focus on the use of coding techniques to efficiently provide fault tolerance to linear finite-state machines (LFSMs). Unlike traditional fault tolerance schemes, which rely heavily-particularly for dynamic systems operating over extended time horizons-on the assumption that the error-correcting mechanism is fault free, we are interested in the case when all components of the implementation are fault prone. The paper starts with a paradigmatic fault tolerance scheme that systematically adds redundancy into a discrete-time dynamic system in a way that achieves tolerance to transient faults in both the state transition and the error-correcting mechanisms. By combining this methodology with low-complexity error-correcting coding, we then obtain an efficient way of providing fault tolerance to k identical unreliable LFSMs that operate in parallel on distinct input sequences. The overall construction requires only a constant amount of redundant hardware per machine (but sufficiently large k) to achieve an arbitrarily small probability of overall failure for any prespecified (finite) time interval, leading in this way to a lower bound on the computational capacity of unreliable LFSMs.