Production of zearalenone in vitro and in corn grains stored under modified atmospheres

The production of zearalenone by an isolate of Fusarium equiseti was studied in chemically defined medium and in corn grains stored under modified atmospheres. An increase in the concentrations of sucrose or xylose in Czapek's medium resulted in increased toxin production, while no toxin was produced when lactose was present in the medium. Methionine (10(-2) and 10(-3) M) and cystine (10(-3) M) added to Czapek's medium inhibited zearalenone production. When amino acids or nitrogen salts were added as the sole nitrogen source, only alanine, tryptophan and NH4Cl totally inhibited zearalenone production. Zearalenone production was inhibited almost completely in high-moisture corn grains (27%) kept under atmospheres enriched with high CO2 levels (60%, 40% or 20%) with either 20% or 5% O2. However, a lower amount of CO2 was needed to inhibit fungal development and toxin formation when a reduced O2 level was applied.     

Crystallization of some anorthite-diopside glass precursors

Anorthite and diopside have been obtained from complete devitrification of glasses belonging to the quaternary system MgO-CaO-Al₂O₃-SiO₂. Microstructure, the natural trend of the nucleation mechanism and kinetic studies on the crystallization phenomenon have been investigated by means of optical and electron microscopies, thermal and thermomechanical techniques and X-ray powder diffractometry. All the glasses investigated show a complete crystallization starting from a simple surface nucleation process. The activation energy for the crystallization process proved to be higher than that for viscous flow, leading to an important aspect modification in the sample during ceramization. Thermal stability and physical properties of both glass and glass-ceramic materials have been tested, suggesting the possible use of these materials in industrial application.     

ESD–RF co-design methodology for the state of the art RF-CMOS blocks

This paper describes an approach to design ESD protection for integrated low noise amplifier (LNA) circuits used in narrowband transceiver front-ends. The RF constraints on the implementation of ESD protection devices are relaxed by co-designing the RF and the ESD blocks, considering them as one single circuit to optimise. The method is applied for the design of 0.25 μm CMOS LNA. Circuit protection levels higher than 3 kV HBM stress are achieved using conventional highly capacitive ggNMOS snapback devices. The methodology can be extended to other RF-CMOS circuits requiring ESD protection by merging the ESD devices in the functionality of the corresponding matching blocks.     

Decision Making Effectiveness in Wildfire Incident Management Teams

During large scale wildfires, suppression activities are carried out under the direction of an Incident Management Team (IMT). The aim of the research was to increase understanding of decision processes potentially related to IMT effectiveness. An IMT comprises four major functions: Command, Operations, Planning, and Logistics. Four methodologies were used to study IMT processes: computer simulation experiments; analyses of wildfire reports; interviews with IMT members; and cognitive ethnographic studies of IMTs. Three processes were important determinants of IMT effectiveness: information management and cognitive overload; matching component function goals to overall goals; and team metacognition to detect and counter task‐disruptive developments. These processes appear to be complex multi‐person analogues of individual Incident Command processes identified previously. The findings have implications for issues such as: creating IMTs; training IMTs; managing IMTs; and providing decision support to IMTs.     

Theoretical analysis of RAIM in the occurrence of simultaneous two-satellite faults

Most algorithms on receiver autonomous integrity monitoring (RAIM) are under the assumption of a single-satellite fault, because there is an extremely small probability that significant simultaneous multiple-satellite faults may occur. However, after the implementation of the Galileo system in a few years, there will be more satellites in view for the user to utilise together with GPS satellites, and a combination of them will bring better performance for RAIM. On the other hand, with the help of wide area augmentation system and the use of dual-frequency operation, pseudo-range errors will be reduced greatly. Thus, tighter alert limits are required for RAIM, and formerly `small' errors should not be neglected. All of those factors make it necessary to consider simultaneous multiple-satellite faults. A detailed theoretical analysis of RAIM under the condition of two-satellite faults for both vertical and horizontal directions is presented. The characteristic/max slopes for every pair of satellites are then deduced in order to calculate the tighter vertical/horizontal protection level for RAIM     

Dynamic control of the permanent magnet-assisted reluctance synchronous machine

A digital signal processor-based control system for the permanent magnet-assisted reluctance synchronous machine, with the emphasis on dynamic performance, is proposed. A classical design approach is used to design the current and speed controllers for the machine. The stator current of the machine is controlled in such a way that the current angle in the dq synchronous reference frame is constant. The load-torque is estimated using a state space observer and compensation current based on the estimated load is used to improve the dynamic performance of the drive. The control system design is machine specific as it relies on data from finite-element analysis. Simulated and measured results on a 110-kW power level show that the resulting control system is stable and robust with good dynamic performance     

Bidirectional repeaterless transmission of 8 x 10 GE over 210 km of standard single mode fibre

Experimental results on error-free bidirectional transmission of 8times10 Gigabit Ethernet channels over 210 km of standard single mode fibre are presented here. Inexpensive XENPAKs transceivers, conventional unidirectional 1530-1560 nm (C-band) erbium-doped fibre amplifiers and fibre Bragg grating dispersion compensating modules have been used. The results are very promising, especially for operators of national research and educational networks     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.     

Impact of a snow avalanche against an obstacle. Formation of shock waves

The paper is devoted to the effect of compressibility of the avalanche snow impacting an obstacle. Compression shocks generated by obstacle cause high pressure peaks at first instants of impact. That is why the account of compressibility is essential for the understanding of measurements and the design of structures. The main problem in calculation compression shocks in avalanches is to formulate an equation of state for moving snow in impact. Two different types of equations of state are proposed depending on the type of the avalanche (low-density and high-density flows). The approach is not totally new. It was earlier proposed mainly in Russian literature. Here a brief review of the previous work is given with discussion of some gaps in it. The theory is reformulated and further developed to account thermodynamical equations. The simplest case of a normal compression shock in an avalanche flow is studied. Examples of estimations of pressure and density behind a shock are given. It is important to emphasize that the Mach number plays an important role in the theory of compressible flows so it should be taken into account (together with the Froude number) in calculation and modelling an avalanche impact pressure.