Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

Alloy 22 (N06022) is the current candidate alloy used to fabricate the external wall of the high-level nuclear waste containers for the Yucca Mountain repository. It was of interest to study and compare the general and localized corrosion susceptibility of Alloy 22 in fluoride and chloride solutions at 90 °C. Standard electrochemical tests such as cyclic potentiodynamic polarization, amperometry, and electrochemical impedance spectroscopy were used. Studied variables included the solution pH and the alloy microstructure (thermal aging). Results show that Alloy 22 is highly resistant to general corrosion in all the solutions tested. Thermal aging is not detrimental and even seems to be slightly beneficial for general corrosion at the higher solution pHs. Pitting corrosion was never observed. Crevice corrosion was found only for high chloride-containing solutions after anodic polarization. The presence of fluoride ions together with chloride ions seems to increase the susceptibility of Alloy 22 to crevice corrosion compared to pure chloride solutions. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

A new stereological principle for test lines in three-dimensional space

A new principle is presented to generate isotropic uniform random (IUR) test lines hitting a geometric structure in three-dimensional space (3D). The principle therefore concerns the estimation of surface area, volume, membrane thickness, etc., of arbitrary structures with piecewise smooth boundary. The principle states that a point-sampled test line on an isotropic plane through a fixed point in 3D is effectively an invariant test line in 3D. Particular attention is devoted to the stereology of particles, where an alternative to the surfactor method is obtained to estimate surface area. An interesting case arises when the particle is convex. The methods are illustrated with synthetic examples.     

Generation of Gas Discharge Plasma by an Arc Source with a Cold Hollow Cathode

The results from a study of an arc plasma source with a cold hollow cathode are presented. The source generates plasma with a density of ∼10¹⁰ cm⁻³ in a volume of ∼0.2 m³ at discharge currents of up to 150 A, an arc discharge operating voltage of 30–40 V, and a low pressure of 0.1–1 Pa. The motion of the cathode spot in the crossed electric and magnetic fields inside the hollow cathode and the cathode’s special design make it possible to eliminate almost completely the penetration of the sputtered cathode material into the working vacuum chamber.__________Translated from Pribory i Tekhnika Eksperimenta, No. 3, 2005, pp. 62–66.Original Russian Text Copyright © 2005 by Schanin, Koval, Akhmadeev.     

Influence of generator load conditions on third-harmonic voltages in generator stator winding

The influence of changes in load conditions of the generator-transformer unit on the operating conditions of the 100% ground-fault protection of the generator stator winding based on the third-harmonic voltages was analyzed. The analyzed stator ground-fault protection system is by ratio of the voltages third harmonic in generator neutral and at the generator terminals. The third-harmonic voltages were determined on the base of the experimental tests (measurements) run in real conditions at changes in active and reactive load conditions of the generator. It was found that mainly the generator active load influences the voltage feeding the measuring element of ground-fault protection. Therefore, determining operating conditions of ground-fault protection the influence of the generator active and reactive load should be deeply considered. This can ensure the proper operation of the ground-fault protection based on the voltage third harmonics in the whole range of the changes in generator load. Considering the influence of changes in generator load on the third-harmonic voltages (feeding measuring element of the protection system) will allow eliminating irregular generator tripping as a result of unselective operation of these protections.     

Robust autoregressive predictive power control method for mobile CDMA systems

A closed-loop power control (CLPC) scheme with a multistep (indicating multiple prediction steps) linear autoregressive predictor is presented. The proposed CLPC relies on low-rate sample vector based autoregressive prediction. Compared to currently available predictive CLCP schemes, it demonstrates particularly robust performance in the presence of large loop delays and channel estimation errors.     

Effect of Thin Film Thicknesses and Materials on the Response of RTDs and Microthermocouples

Fabrication and thermal characterization of a resistance temperature detector (RTD) heater and microthermocouples (MTs) on silicon substrates have been reported in this paper. The influence of film thickness and nickel-gold (Au) electroplating on RTD on its steady-state temperature with respect to its steady-state electrical power input and resistance is studied. Further, the thermal effects of multiple thermocouples in a thermopile as well as the effects of Au layers in the contact pads of the thermopiles on their open-circuit Seebeck voltage are studied. Therein lies the novelty of this paper. The in situ operating relationships for the RTD heater and the MT are provided     

An Experimental Investigation into the Feed Rate Capacity of Rotary Valve and Blow Tank Feeders

Industry widely uses rotary valves and blow tanks for the pneumatic conveying of products, each having their pros and cons depending on the specific application. This article shows the differing results obtained when low-velocity conveying a product through a common pipeline using both a drop-through rotary valve and a bottom-discharge blow tank feeder. A number of issues arise in the rotary valve system, the main one being rotary valve air leakage. A blow tank system, on the other hand, does not leak, as it is an enclosed system. The experimental results show dramatic differences in product throughput. Further exploration leads to a novel modification being made to the rotary valve system in an attempt to increase its capacity. The result of this modification shows a slight increase in output tonnage, but still significantly less than that obtained from the blow tank.     

Highly oriented star-like patterns observed on GaSe epilayers grown on Si(111)

Epitaxial lamellar gallium selenide (GaSe) semiconductors have been grown on trench-patterned silicon (Si) substrates by molecular beam epitaxy. An intriguing star-like patterned morphology was identified by atomic force microscopy on these epilayers. This non-trivial feature can be correlated with the accumulation of stacking faults of two concurrent epitaxial domains around self-oriented triangular pits developed earlier on the Si(111) surface by the chemical etching. Crystallographic considerations show how the stars can be formed.     

Radioecological state of the territory and water area in Guba Andreev

The radioecological conditions which developed on the territory over the long operating time of the object of the naval fleet in Guba Andreev are described. The results of an analysis of the sources of the real and potential danger and measures to prevent dangerous effects for the environment and the workers at the time remediation work is performed are discussed. __________ Translated from Atomnaya énergiya, Vol. 101, No. 1, pp. 49–55, July, 2006.     

A prototype of a superconducting magnet for a 170-GHz gyrotron

Within the framework of the “International Thermonuclear Experimental Reactor” (ITER) program, a prototype of a superconducting magnet for a 170-GHz gyrotron has been developed, manufactured, and tested. The operating induction value (7.1 T at the center of a 219-mm-diameter cold hole and 8.1 T on the winding) is reached at a current of 185.2 A. In the final version of the magnet, the required induction value was reached without aging. Special requirements are imposed on the distribution of the magnetic field along the axis, including an abrupt field decrease on both sides of the magnet. Axial forces are additionally taken by a special device. The magnet’s sections are wound with multifiber conductors based on niobium-tin and niobium-titanium alloys. Seventeen resistive shunts are provided for protecting sections during their transition to the normal state. The magnet is equipped with a device for removing a part of energy from the sections. Mechanical stresses in the magnet’s sections and the structure’s power elements have been measured during tests.