Operational management of trunk main discolouration risk

Despite significant on-going investment, water companies continue to receive an unacceptable number of discolouration related customer contacts. In this paper, data from intensive distribution system turbidity monitoring and cluster analysis of discolouration customer contacts indicate that a significant proportion of these contacts are due to material mobilising from the trunk main system, and operational flow increases are shown to have a higher discolouration risk than burst incidents. A trunk main discolouration incident highlighting this risk is discussed, demonstrating the need for pro-active trunk main risk assessments. To identify the source of the material event flow rates were modelled using the PODDS (prediction of discolouration in distribution systems) discolouration model. Best practice pro-active management is demonstrated in a case study where the PODDS model is used to implement managed incremental flow changes on a main with known discolouration risk with no discolouration impact to customers and significant cost savings.     

Development of a thermal scheme for a cogeneration combined-cycle unit with an SVBR-100 reactor

At present, the prospects for development of district heating that can increase the effectiveness of nuclear power stations (NPS), cut down their payback period, and improve protection of the environment against harmful emissions are being examined in the nuclear power industry of Russia. It is noted that the efficiency of nuclear cogeneration power stations (NCPS) is drastically affected by the expenses for heat networks and heat losses during transportation of a heat carrier through them, since NPSs are usually located far away from urban area boundaries as required for radiation safety of the population. The prospects for using cogeneration power units with small or medium power reactors at NPSs, including combined-cycle units and their performance indices, are described. The developed thermal scheme of a cogeneration combined-cycle unit (CCU) with an SBVR-100 nuclear reactor (NCCU) is presented. This NCCU should use a GE 6FA gasturbine unit (GTU) and a steam-turbine unit (STU) with a two-stage district heating plant. Saturated steam from the nuclear reactor is superheated in a heat-recovery steam generator (HRSG) to 560–580°C so that a separator–superheater can be excluded from the thermal cycle of the turbine unit. In addition, supplemental fuel firing in HRSG is examined. NCCU effectiveness indices are given as a function of the ambient air temperature. Results of calculations of the thermal cycle performance under condensing operating conditions indicate that the gross electric efficiency η _{el NCCU} ^gr of = 48% and N _{el NCCU} ^gr = 345 MW can be achieved. This efficiency is at maximum for NCCU with an SVBR-100 reactor. The conclusion is made that the cost of NCCU installed kW should be estimated, and the issue associated with NCCUs siting with reference to urban area boundaries must be solved.     

Simulation of one-sided heating of boiler unit membrane-type water walls

This study describes the results of simulation of the temperature field and the stress-strain state of membrane-type gastight water walls of boiler units using the finite element method. The methods of analytical and standard calculation of one-sided heating of fin-tube water walls by a radiative heat flux are analyzed. The methods and software for input data calculation in the finite-element simulation, including thermoelastic moments in welded panels that result from their one-sided heating, are proposed. The method and software modules are used for water wall simulation using ANSYS. The results of simulation of the temperature field, stress field, deformations and displacement of the membrane-type panel for the boiler furnace water wall using the finite-element method, as well as the results of calculation of the panel tube temperature, stresses and deformations using the known methods, are presented. The comparison of the known experimental results on heating and bending by given moments of membrane-type water walls and numerical simulations is performed. It is demonstrated that numerical results agree with high accuracy with the experimental data. The relative temperature difference does not exceed 1%. The relative difference of the experimental fin mutual turning angle caused by one-sided heating by radiative heat flux and the results obtained in the finite element simulation does not exceed 8.5% for nondisplaced fins and 7% for fins with displacement. The same difference for the theoretical results and the simulation using the finite-element method does not exceed 3% and 7.1%, respectively. The proposed method and software modules for simulation of the temperature field and stress-strain state of the water walls are verified and the feasibility of their application in practical design is proven.     

Test facility for investigation of heat transfer of promising coolants for the nuclear power industry

The results are presented of experimental investigations into liquid metal heat transfer performed by the joint research group consisting of specialist in heat transfer and hydrodynamics from NIU MPEI and JIHT RAS. The program of experiments has been prepared considering the concept of development of the nuclear power industry in Russia. This concept calls for, in addition to extensive application of water-cooled, water-moderated (VVER-type) power reactors and BN-type sodium cooled fast reactors, development of the new generation of BREST-type reactors, fusion power reactors, and thermonuclear neutron sources. The basic coolants for these nuclear power installations will be heavy liquid metals, such as lead and lithium-lead alloy. The team of specialists from NRU MPEI and JIHT RAS commissioned a new RK-3 mercury MHD-test facility. The major components of this test facility are a unique electrical magnet constructed at Budker Nuclear Physics Institute and a pressurized liquid metal circuit. The test facility is designed for investigating upward and downward liquid metal flows in channels of various cross-sections in a transverse magnetic field. A probe procedure will be used for experimental investigation into heat transfer and hydrodynamics as well as for measuring temperature, velocity, and flow parameter fluctuations. It is generally adopted that liquid metals are the best coolants for the Tokamak reactors. However, alternative coolants should be sought for. As an alternative to liquid metal coolants, molten salts, such as fluorides of lithium and beryllium (so-called FLiBes) or fluorides of alkali metals (so-called FLiNaK) doped with uranium fluoride, can be used. That is why the team of specialists from NRU MPEI and JIHT RAS, in parallel with development of a mercury MHD test facility, is designing a test facility for simulating molten salt heat transfer and hydrodynamics. Since development of this test facility requires numerical predictions and verification of numerical codes, all examined configurations of the MHD flow are also investigated numerically.     

Boosting the electrochemical performance of Li-garnet based all-solid-state batteries with Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> electrode: Routes to cheap and large scale ceramic processing

All-solid-state batteries based on fast Li⁺ conducting solid electrolytes such as Li₇La₃Zr₂O₁₂ (LLZO) give perspective on safe, non-inflammable, and temperature tolerant energy storage. Despite the promise, ceramic processing of whole battery assemblies reaching close to theoretical capacities and finding optimal strategies to process large-scale and low cost battery cells remains a challenge. Here, we tackle these issues and report on a solid-state battery cell composed of Li₄Ti₅O₁₂ / c-Li_6.25Al_0.25La₃Zr₂O₁₂ / metallic Li delivering capacities around 70–75 Ah/kg with reversible cycling at a rate of 8 A/kg (for 2.5–1.0 V, 95 °C). A key aspect towards the increase in capacity and Li⁺ transfer at the solid electrolyte-electrode interface is found to be the intimate embedding of grains and their connectivity, which can be implemented by the isostatic pressing of cells during their preparation. We suggest that simple adaption of ceramic processing, such as the applied pressure during processing, strongly alters the electrochemical performance by assuring good grain contacts at the electrolyte-electrode interface. Among the garnet-type all-solid-state ceramic battery assemblies in the field, considerably improved capacities and cycling properties are demonstrated for Li₄Ti₅O₁₂ / c-Li_6.25Al_0.25La₃Zr₂O₁₂ / metallic Li pressed cells, giving new perspectives on cheap ceramic processing and up-scalable garnet-based all-solid-state batteries.     

Peat swamps at Giral lignite field of Barmer basin,Rajasthan, Western India: understanding the evolution through petrological modelling

International Journal of Coal Science & Technology - The lignite samples collected from Giral lignite field of Barmer basin have been subjected to petrological investigation. The data generated...     

Correlations Among Signatures for Detection of Different Types of Fires

One way of overcoming the problem of false alarms encountered in a single parameter detection system due to non-fire stimulii is the simultaneous use of multiple signatures. Researchers have found significant benefits of multi-sensor detection in reducing false triggering. Appreciable interest has been expressed in using carbon monoxide (CO) or carbon dioxide (CO₂) gas sensors in combination with smoke sensors. The present study has been carried out to determine the correlation and inter-dependence between two different fire signatures like CO–OD (optical density), CO–CO₂, CO₂–OD. The signatures have been investigated using experimental measurements of a fire inside a closed compartment measuring 7 x 7 x 4.2 m. A range of fuels are used, and both smouldering and flaming combustion are examined. Attempts have been made to examine whether correlation coefficients between two signatures can form a basis of detection and be exploited as one of the components in multi- criteria fire detection algorithm. The CO/CO₂ ratio as a criterion for detector operation has also been examined and discussed in the light of existing literature and codal provisions.     

Column Kinetic Tests Assessing Geochemical Behavior of Mine Wastes in the Jerada Coal District (Morocco)

The Jerada anthracite mine in Morocco was abandoned in 2001 after producing approximately 20 million tonnes of solid waste. The acid generating potential of these wastes was determined by performing tests on five samples collected from relatively older and more recent waste deposits. No carbonate minerals were identified. Pyrite was the only sulphide mineral observed and much of it had been completely transformed into Fe-oxides. Analysis of the waste indicated low levels (<1 %) of Ca and Mg, while Fe and Al concentrations generally exceeded 5 %. Modified Sobek static tests and column kinetic tests were conducted for 24 months. The static test results were not conclusive (20 <net neutralising potential <20 Kg CaCO₃/t). Leachates from the kinetic tests for three of the five samples showed an initially acidic pH, while those of the remaining two became acidic by the end of the tests. Sulfate concentrations (SO₄ ^2?) decreased over time from 5000 to 200 mg/L.     

Prediction of seepage water pressure for slope stability at the Gol-E-Gohar open pit mine

Slope stability accidents are one of the leading causes of destruction at open pit mining operations. Such interception of the seepage water results in the water inflow from the surrounding aquifer towards the mine excavations. In order to design an effective drainage scheme for an open pit mine, prediction of water inflow into the pit is essential. These changes have resulted in some failures and instability problems in different parts of Gol-E-Gohar iron open pit mine. It seems that main parameters which effect the failure and instability of the mine slopes are high pressure of groundwater and system of discontinuities (faults, joins, and bedding planes), which intersect the pit walls. The analysis results indicate that stability of the final pit slopes is sensitive to multi-planar failures and confined water in the walls pit is also a factor adversely affecting the stability. Problems associated with groundwater at the site were also assessed with the analyses of piezometric level and groundwater inflow.     

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.