On LP-MUSIC

Studies the consistency properties of a method recently proposed for temporal or spatial frequency estimation from noisy data. The method in question is a MUSIC technique that makes use of a linear prediction algorithm to determine the signal subspace. It is shown that the signal subspace determined by the subject linear prediction-MUSIC (LP-MUSIC) algorithm can collapse in certain scenarios and. Hence, that the LP-MUSIC frequency estimates are not always consistent. The difficulties LP-MUSIC may encounter in some cases are illustrated by means of numerical examples     

Phase Relations and Properties of Phases in the TlInSe2–TlPrSe2 System

The phase diagram of the TlInSe₂–TlPrSe₂ system was mapped out using differential thermal analysis and x-ray diffraction data. The system was found to contain a partial solid-solution series (0–10 mol % TlPrSe₂) and a quaternary compound of composition Tl₂InPrSe₄. The electrical conductivity, Hall coefficient, and thermoelectric power of TlPrSe₂ and Tl₂InPrSe₄ were measured in the temperature range 300–1100 K. The charge carriers in these compounds were shown to be scattered mainly by longitudinal acoustic phonons.     

The effect of multipath on the detection of symbol-rate spectrallines by delay and multiply receivers

The effect of a secondary path signal on the detectability of the symbol rate spectral line of a binary phase-shift keyed (BPSK) signal by a delay and multiply receiver is investigated. The measure of detectability used is the rate line signal-to-noise ratio. The parameters that define the secondary path signal are initially modeled as deterministic quantities; the phase of the secondary path signal is then taken to be a random variable independent and uniform on (0, 2π). It is found that, with deterministic path parameters, the presence of a secondary path can seriously affect the detectability of BPSK rate lines. When the phase is taken to be uniform on (0, 2π) over the receiver observation time, then the delay and multiply receiver performs as if no multipath is present. In this case, a noncoherent power addition of the primary and secondary path signals occurs     

An over 2200-km coherent transmission experiment at 2.5 Gb/s usingerbium-doped-fiber in-line amplifiers

A 2223 km transmission distance was achieved with a 2.5-Gb/s heterodyne detection system that used erbium-doped-fiber in-line amplifiers and dispersion-shifted single-mode fibers. Twenty-five amplifiers, placed at approximately 80-km intervals, offered a total gain of more than 440 dB. Receiver sensitivity was -42.0 dBm, with only a 4.2-dB penalty from the initial sensitivity achieved by the back-to-back configuration     

Elastic, anelastic, and piezoelectric coefficients of langasite: resonance ultrasound spectroscopy with laser-Doppler interferometry

This paper presents advanced techniques to determine all independent elastic-stiffness coefficients C/sub ij/, the associated internal friction Q/sub ij//sup -1/, and piezoelectric coefficients e/sub ij/ of monocrystal langasite (La/sub 3/Ga/sub 5/SiO/sub 14/) using a single rectangular parallelepiped specimen. Langasite's crystal structure belongs to the trigonal system with point group 32, and thus possesses six independent C/sub ij/, two e/sub ij/, and two dielectric coefficients /spl epsiv//sub ij/. All of the elastic and piezoelectric coefficients affect the mechanical resonance frequencies of the solid specimen, and measuring them very accurately permits one to determine the C/sub ij/ and e/sub ij/ with known density, dimensions, and e/sub ij/. We developed a piezoelectric tripod to support the specimen upward and measured the free-vibration resonance frequencies with minimum load from its own weight. This weak and stable acoustic coupling ensures accuracy of the frequency measurement better than 10/sup -5/, enough to determine the coefficients reliably. Our C/sub ij/ fall in the range of results measured with previous (conventional) methods. Our e/sub 11/ is smaller than the reported values by 1.2-13%, and e/sub 14/ is larger by 44-97%. For the internal friction measurement, we used a solenoid coil to vibrate the specimen without any contact. The longitudinal-wave internal friction considerably exceeds the shear-wave internal friction, which can be explained by phonon-phonon interactions.     

Recombination lifetime profiling in very thin Si epitaxial layersused for bipolar VLSI

A recently proposed measurement technique (P. Spirito and G. Cocorullo, IEEE Trans. Electron Devices, vol.ED-32, no.9, p.1708-13, 1985) to evaluate the recombination lifetime along epitaxial layers is used to characterize the quality of very thin Si epitaxial layers used for bipolar technology. The experimental results show the ability of the technique to give accurate and detailed information on the quality of epilayers that could be useful in monitoring and improving the growth process. The experimental results show that the lifetime values in thin epilayers are not correlated with doping profiles in the same layers; moreover, they are only slightly dependent on different processes used to make the test devices