钻井液用BDY-1便携式堵漏仪

在堵漏过程中，对堵漏材料和堵漏浆配方的优选是决定堵漏成功的关键。为了能在现场对堵漏进行评价，研制出BDY－1便携式堵漏仪，该堵漏仪主要由不锈钢钢柱圈钢，压力表等加工而成，该堵漏仪体积小，重量轻，价格低，仅为国产堵漏仪的1／20。试验结果表明BDY－1便携式堵漏仪操作简便，可快速对堵漏材料进行评价并筛选出堵漏配方；数据重复性好，准确可靠，能达到进口或国产堵漏仪的水平；在模拟漏层选定后，可采用多套压力梯度，对堵漏浆封堵效果进行评价，在压力梯度选定后，可评价堵漏浆对不同类型漏层的封堵效果；如果扩大压力范围，可对封堵后的漏层进行破裂试验，从而确定合理的钻井施工参数；适用现场操作和应用。     

电视机监督检验电磁兼容结果分析和对策

本文讨论了电磁兼容对电视机的技术要求和相应对策。     

空投水雷空中弹道设计与仿真

文中对空投水雷的空中弹道进行了研究.在建立了六自由度的水雷空中弹道模型的基础上,在Matlab/Simulink环境下对水雷的空中弹道进行了仿真,并分析了投雷速度、水雷初始俯仰角、空中自然风对水雷空中弹道的影响.     

同位素中子源活化瞬发分析装置

一、基本原理自六十年代中期以来,中子活化瞬发γ射线元素分析技术(PNAA)得到人们广泛重视。与通常的中子活化分析(NAA)技术相比,它分析的是样品中的主要成分,若用同位素中子源,还可进行实时在线连续测定及现场分析。PNAA技术是用热中子与待测元素发生中子俘获反应,处于激发态的产物核在瞬间     

佛山市中心组团桥梁群对河道影响的数值分析

在不同频率流量和阻水程度条件下,采用一维明渠非恒定流网河数学模型,分析规划中的佛山市桥梁群对区间河道洪季行洪、枯季水环境的影响,计算洪季不同频率洪峰流量下规划桥梁群对区间河道行洪洪水位、分流比的影响,枯季时规划桥梁群对区间河道过流量、分流比的影响,结果表明,利用一维网河数学模型计算佛山市中心组团规划桥梁群对区间河道断面平均水位、流量和流速的影响,结果有足够的数值精度,是可信的。     

几种地下水易污性评价方法在徐州张集地区的应用

选择GOD法、DRASTIC法S、INTACS法及SI法4种易污性评价方法用于徐州张集地区的地下水易污性评价,应用GIS/ARCINFO输出张集地区的地下水易污性指标图。不同易污性评价方法对张集地区裂隙岩溶地下水的易污性评价得到了不同的结论,经分析,SI法更适用于张集地区的实际情况。具体应用时,要根据评价地区的实际条件,并和评价地区污染监测情况结合,选择合适的易污性评价方法评价地下水的易污性。     

薄板坯连铸连轧流程Ti微合金化高强钢开发与应用

在薄板坯连铸连轧流程上，经过对Ti微合金化技术研究，有效解决了Ti微合金化强度性能波动大的问题，开发出屈服强度450～700MPa高强钢。对试制钢组织性能和工业应用分析研究，表明该产品通板性能良好，通板强度差30MPa左右；成形性能良好，d=0时冷弯测试全部合格；同时还具有良好焊接性能，焊接后，强度波动较小，均在母材部位断开；试制钢显微组织为珠光体和铁素体，晶粒均匀细小，平均尺寸为4～8／μm；实物质量满足集装箱和汽车制造行业要求，具有广阔市场前景。     

Doped silicon and NIS junctions for bolometer applications

We discuss the performance, of a normal metal hot electron bolometer (NHEB) that we have measured at 0.3 K. We found that the noise equivalent power was limited by the amplifier noise. To improve the NHEB power response and to make it more robust and reliable we propose to substitute the normal metal with heavily doped silicon. The heavily doped silicon behaves like a metal with lower carrier concentration and has a smaller electron–phonon thermal coupling. We have fabricated superconductor-doped silicon-superconductor contacts (S-Sm-S) and we have used them as thermometers and coolers.     

Inorganic–organic hybrid materials with zirconium oxoclusters as protective coatings on aluminium alloys

Inorganic–organic hybrid materials are attracting a strong scientific interest mainly for their outstanding inherent mechanical and thermal properties, which can be traced back to the intimate coupling of both inorganic and organic components. By carefully choosing the experimental parameters used for their synthesis, chemically and thermally stable acrylate-based hybrid material embedding the zirconium oxocluster Zr₄O₄(OMc)₁₂, where OMcCH₂C(CH₃)C(O)O, can be deposited as UV-cured films on aluminium alloys.

In particular, the molar ratios between the oxocluster and the monomer, the polymerisation time, the amount of photo-initiator and the deposition conditions, by using an home-made spray-coating equipment, were optimised in order to obtain the best performing layers in terms of transparency and hardness to coat aluminium alloy (AA1050, AA6060 and AA2024) sheets. Furthermore, it was also evaluated whether the hybrid coatings behave as barrier to corrosion.

Several coated samples were prepared and characterised. Environmental scanning electronic microscopy (ESEM) and scratch test were used to investigate the morphology of the films and to evaluate their scratch resistance, respectively. Electrochemical impedance spectroscopy (EIS) was performed in order to evaluate if the coatings actually protect the metallic substrate from corrosion.

In order to measure shear storage modulus (G′) and loss modulus (G″) of the materials used for coatings, bulk samples were also obtained by UV-curing of the precursors solution. Dynamical mechanical thermal analysis (DMTA) was performed in shear mode on cured disks of both the hybrid materials and pristine polymer for comparison. The values of T_g were read off as the temperatures of peak of loss modulus. The length and mass of all the samples were measured before and after the DMTA analysis, so that the shrinkage of the materials in that temperature range was exactly evaluated.