TiO2纳米薄膜的微结构控制

通过有机酸修饰的水基so1-gel法，分别制备了由层状、针形和球形纳米粒子构成的纳米二氧化钛薄膜，采用SEM、XRD、红外光谱进行了表征.研究发现，调节水解过程中钛酸四丁酯：醋酸的摩尔比，可以控制薄膜的微结构，并对其机理进行了分析.该方法可以应用于sol-gel法制备其他纳米薄膜过程中的材料微结构控制.     

Seismic Physical Modeling Technology and Its Applications

1. Introduction Seismic physical modeling technology is an important method for the research on seismic exploration theory and methods. In seismic physical experiments, the earth, mantle or field site are scaled down to physical models according to the similarity principle, and then the seismic field and its variation are observed in the laboratory for the research work on the theories and methods of the earth structure, earthquake forecasting, energy and mineral resource exploration, and engi…     

圆筒形铸件缩松缩孔的产生原因及解决方法

针对圆筒形铸铁辊体冒口端面产生的缩松、缩孔缺陷，进行了举例说明、系统分析，找到了缺陷产生的原因及影响因素。通过解决措施的应用与实施，有效地克服了圆筒形辊体铸件冒口端面产生的缩松、缩孔缺陷，同时应用到其它大型圆筒形铸件中，都得到了良好效果。     

LF精炼造渣工艺研究

根据炼钢厂第一连铸车间钢包炉造渣的特点,利用炉渣组元CaO、SiO2、Al2O3、CaF2进行分析研究,制定出合理的渣系配比和造渣制度,通过实践取得了稳定的脱硫、脱氧效果.     

浅析燕云十六州的战略价值

后晋天福三年(938年),"儿皇帝"石敬瑭"履约"向契丹割献燕云十六州.从此,中原王朝丧失了抵御北方游牧民族入侵的天然屏障,北方门户大开.宋代,燕云地区的争夺几乎贯穿了十至十二世纪北宋与辽金战争的整个过程.事实上,后人所指的"燕云十六州"与石敬瑭割辽的十六州在名称、时间和地域上有很大的差别;燕云地区内的险峻的山脉、横贯的河流与长城、五关一起构成了其巨大的军事价值;富庶的经济,众多的人口又构成了该地区巨大的经济价值;从历史上看,燕云十六州的归属于中原王朝和北方游牧民族政权双方而言,战略意义重大.     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

Influence of Carrier Mobility and Interface Trap States on the Transfer and Output Characteristics of Organic Thin Film Transistors

We have used two dimensional drift diffusion simulations to calculate the electrical properties of bottom contact pentacene based organic thin film transistor, taking into account field-dependent mobility and interface or bulk trap states. In order to derive from basic principles the transport properties of the organic semiconductor we have developed a Monte Carlo simulator to calculate the field dependent mobility. We analyzed the presence of trap states at the interface between organic material and gate insulator and we show the influence of trap states combined with the effect of field-dependent mobility on the transfer characteristic. Numerical calculations are also reported for the output characteristics of the device showing a very good agreement with the available experimental results.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel copolymer containing pyridylazo-2-naphthoxyl group via reversible addition–fragmentation chain transfer (RAFT) polymerization

A novel monomer containing pyridylazo-2-naphthoxyl group, 1-(1-(4-vinylbenzyloxy)naphthalen-2-yl)-2-(pyridin-2-yl)diazene (VBNPA), was successfully synthesized and copolymerized with styrene (St) in N,N-dimethyl formamide (DMF) via reversible addition–fragmentation chain transfer (RAFT) polymerization using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) as RAFT agent. The polymerization behavior exhibited “living”/controlled characters. The obtained copolymer, poly(St-co-VBNPA), with pre-determinable molecular weight and narrow molecular weight distribution can be used as a carrier in metal ion detection and analysis via pre-concentration technique. The copolymer–metal ion (copper (Cu) and europium (Eu)) complexes were prepared and characterized.     

单片机在产生特殊复合磁场系统中的应用

探讨了在电磁铸轧中采用单片机作为核心监控装置的工作原理，论述了用单片机实现函数信号发生的硬件设计和软件流程，实现了对感应器产生特殊复合磁场的控制，并提出了一种新的随机数的产生方法。