辽河催化裂化澄清油中间馏分热反应研究

采用先加入絮凝剂脱灰，再经减压蒸馏切割420～500℃馏分的方法，将辽河催化裂化澄清油预处理，考察了澄清油、加入絮凝剂脱灰后的澄清油以及脱灰后再减压蒸馏所得的中间馏分这3种原料在热转化过程中中间相的转化历程，并采用偏光显微镜观察热转化产物。结果表明，澄清油预处理效果明显，所得中间馏分具有较低的H／C原子比（nH／nC）和适宜的组成分布，是生产针状焦的理想原料。热转化产物的光学组织结构属于各向异性发达的广域-流线型结构。     

Some kinetic aspects of unsteady-state partial oxidation reactions. Dynamic processes on metal oxide surfaces

It is shown that steady-state kinetic data do not allow the discrimination between the redox and associated mechanisms of the partial oxidation reactions. A discrimination between these mechanisms was performed using transient experiments. The obtained rate expressions are in agreement with experimental kinetic data for catalytic partial oxidation of o-xylene.

An influence of the conjugate oxidation of a catalyst surface on dynamics and kinetics of the heterogeneous catalytic oxidative reactions is considered. Computing simulation of methane oxidative coupling of methane reaction at lowered temperature and elevated pressure has been performed. It showed that the reaction order with respect to oxygen exceeding unity is consistent with the chain branching mechanism of the reaction in the presence of TiSi₂ and TiB₂ and showed the important role of the branching chain cycles in the low-temperature OCM reaction at elevated pressure.     

A meta-analytic review of the relationship between absence and turnover.

A meta-analysis that combined 33 correlations from 17 studies found a corrected average correlation of .330 between absence and turnover. The type of absence measure did not moderate the covariation between absence and turnover, but industry type and study duration did act as moderators. The results are discussed in the context of the "withdrawal" approach to understanding employee behaviors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

精密陶瓷部件近净成型技术的发展

重点介绍了近十年发展起来的陶瓷部件的近净成型技术 ,主要包括直接凝固注模成型、凝胶注模成型、陶瓷注射成型、陶瓷无模成型和微注入成型。对这些新的成型方法的原理、工艺过程及应用特点进行了较全面的分析与比较。     

小浪底3号灌浆洞辐射灌浆孔的成孔技术

辐射灌浆孔是基岩防渗灌浆处理中的一种特殊设计,一般因应特殊部位而设计,技术设计复杂,施工难度大,尤其是其成孔施工难度.小浪底3号灌浆洞辐射灌浆孔是为解决水工建筑物建成后,对可能存在的渗漏通道进行封堵而设计的,其不同角度和深度对成孔技术要求提出了新的课题.     

内燃机车曲轴中频淬火过程的数值模拟

借助 ANSYS大型有限元分析软件 ,实现了 16 V2 4 0曲轴淬火过程的计算机模拟 ,模拟结果可直观地显示出任一时刻曲轴表面及内部的温度分布、冷却曲线以及淬火结束后的残余应力分布 ,并能预测淬硬层深度。同时对比了轴颈内圆角处进行淬火和不进行淬火两种工艺的效果 ,为现场提供了用虚拟现实方法详尽分析和研究淬火工艺的工具。     

One-step synthesis of functional Co nanoparticles for surface-initiated polymerization

Much effort is conducted to construct artificial objects that are capable of converting chemical or electromagnetic energy into a specific, predetermined motion on the nanoscale. We present results on the synthesis of core–shell nanoparticles capable to be set in rotation by the application of electromagnetic fields. The nanorotors implied in the study are based on the cobalt nanospheres decorated with a stabilizing brush shell composed of poly(?-caprolactone) that is attached by surface-initiated polymerization. The functional cores used as macroinitiators can be fabricated alternatively by a two-step or a one-step process.     

浅谈热水采暖系统运行调整方法

介绍了热水采暖系统运行及调整的注意事项，分析了立支管阀门、集气罐的作用，提出了使热水采暖系统的调节和集排气操作达到理想程度的有效措施，以实现良好的供暖效果。     

砂浆立方体抗压强度与底模的关系

建筑砂浆试件的制作目前均执行《建筑砂浆基本性能试验方法》(JGJ70-1990)有关规定，所用底模系含水量不大于2％的普通粘土砖。     

TFT LCD的过压驱动技术探讨

过压驱动技术是提高液晶显示器响应速度的关键技术之一。文章分析了TN型TFT液晶显示的原理及影响响应时间的因素,探讨了过压驱动的原理和系统结构,对灰阶亮度上升和下降两种状态下的应用进行了说明。对液晶显示系统进行了实验分析以及响应时间的测量,结果表明通过过压驱动可以在很大程度上提高液晶显示器的响应时间,有效改善显示画面的动态模糊问题。在0℃的环境温度下,最大灰阶响应时间不超过80ms。