Polymeric carbon nanocomposites from multiwalled carbon nanotubes functionalized with segmented polyurethane

Multiwalled carbon nanotubes (MWNT) were functionalized with segmented polyurethanes (PU) by the “grafting to” approach. Raman and X‐ray photoelectron spectroscopy (XPS) spectra show that the sidewalls of MWNTs have been functionalized with acid treatment, and the amount of COOH increases with increasing acid treatment time. FTIR and X‐ray diffraction (XRD) spectra confirm that PU is covalently attached to the sidewalls of MWNTs by esterification reaction. Similar to the parent PU, the functionalized carbon nanotube samples are soluble in highly polar solvents, such as dimethyl sulfoxide (DMSO) and N,N‐dimethylformamide (DMF). The functionalized acid amount and the grafted PU amount were determined by thermogravimetric analyses (TGA). Comparative studies, based on SEM images between the PU‐functionalized and chemically defunctionalized MWNT samples, also reveal the covalent coating character. Dynamic mechanical analysis (DMA) of nanocomposite films prepared from PU and PU‐functionalized MWNTs show enhanced mechanical properties and increased soft segment T_g. Tensile properties indicate that PU‐functionalized MWNTs are effective reinforcing fillers for the polyurethane matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Development of environmentally responsive hydrogels with metal affinity behavior

This work describes initial efforts to incorporate affinity ligands within an environmentally responsive hydrogel. Metal affinity ligands were chosen as model affinity groups and thermally responsive N‐isopropyl acrylamide/acrylamide copolymers were used as the base hydrogels. The ? NH₂ group of the acrylamide serves as a reactive group for functionalization with metal affinity ligands. The gels were synthesized by free radical polymerization and Cu²⁺ was bound to the gel via 1,4‐butanediol diglycidyl ether (BDE) as a linker and iminodiacetic acid (IDA) as a chelating ligand. The base acrylamide gels were also functionalized with metal affinity ligands to allow for comparison with thermally responsive affinity gels. The results show the effectiveness of this technique for both these types of gels, and an improved method to immobilize metal affinity groups on to thermally sensitive N‐isopropyl acrylamide gels was also developed. It was seen that the yields for the reaction with BDE decreased with increased reaction time in both kinds of gels, whereas reaction with IDA showed a decrease in yields with increase in temperature for N‐isoporpyl acrylamide gels and increase in yields for acrylamide gels. Further techniques were developed to overcome diffusional resistances and stresses in the thermally responsive N‐isopropyl acrylamide gels so as to improve the distribution of Cu²⁺ ions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Biodegradable blend films based on two polysaccharide derivatives and their use as ibuprofen‐releasing matrices

Differential scanning calorimetry (DSC), FTIR, X‐ray diffraction (XRD), and viscosity methods were used to examine the miscibility, interaction, and degradability of cationic guar gum (GG) and sodium carboxymethylcellulose (NaCMC) in their blend films. The experiment results prove that there exist electrostatic interactions and hydrogen bonding between GG and NaCMC. Blend films degrade quicker than pure GG or NaCMC film. Furthermore, the degradation rate of blend films is related to the interactions between GG and NaCMC. Based on the research of blend films as the drug carriers for Ibuprofen, it is found that the blend composition, initial drug concentration, and pH value affect the drug release and the GG/NaCMC blend films have good sustained release performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3553–3559, 2007     

Evaluation of Al and Some of Its Alloys as Anode Materials vs γ-MnO2 as Cathode Material and Ore Produced γ-MnO2 vs Zn Anode in KOH Solution

In this study electrochemical performance of Al and some of its alloys (Al-Zn, Al-Mg and Al-Mn) anodes vs MnO2 cathode were carried out in alkaline solution. The results show that the Al-Zn alloy anode has the best cell capacity among the other alloys. Cell capacity values go in the order Al-Zn＞Al-Mg＞Al＞Al-Mn. This result is probably related to the nature of passive films formed on the surface of the alloys which examined by scanning electron microscopy (SEM). SEM morphologies of Al and its alloys showed coarse grains of passive films formed on the surface of these anode materials while Al-Mn morphology shows a needle-like structure.Electrolytic manganese dioxide (EMD) produced by electrodepositing on platinum anode from liquor resulting from reduction of low grade pyrolusite ore (β-MnO2) by sulfur slag was characterized as cathode in alkaline Zn-MnO2 batteries. Ore produced sample (EMD1) was performed well in comparison with EMD standard (EMD2) (commercial battery grade electrolytic manganese dioxide, TOSOH-Hellas GH-S). SEM morphology of Zn anode after cell reaction was carried out and showed that Zn anode has fine grains of passive film on its surface.