Validation and improvement of gamma heating calculation methods for the G.A. Siwabessy multipurpose reactor

Nuclear Science and Techniques - This study presents the RF design of a linear accelerator (linac) operated in single-bunch mode. The accelerator is powered by a compressed RF pulse produced from a...     

Magnetron sputtered Dy_2O_3 with chromium and copper contents for antireflective thin films with enhanced absorption

Dy_2O_3 is a rare earth oxide having a number of advanced applications in various fields including protective or antireflective coatings, Main objective of this novel research work is to check the effect of Cr and Cu addition on different properties of Dy_2O_3 and achievement of antireflective thin films with enhanced abso rption. Thin films of these materials we re deposited using DC magnetron with reactive cosputtering. XRD studies reveals the crystalline nature of thin films having Dy_2O_3(222) reflection in all samples with Cr_2O_3(116) and CuO(111) reflections in Cr and Cu containing compositions. Field emission scanning electron microscopy demonstrates the homogeneous deposition of thin films with uniform shape, size and distribution of grains. Refractive index, extinction coefficient and absorption coefficient significantly increase while optical reflectance decreases with Cr and Cu mediation corroborating an improved antireflective mechanism. The imaginary part of dielectric constant is found to increase slightly with low tangent loss for Cr containing composition co nsidered favorable for energy storage applications.     

Radiation induced decontamination of Cr(Ⅵ), Cu(Ⅱ) and phenol in some tannery effluents

Industrialization has led to a number of environmental problems, such as release of toxic metals and other toxic organic and inorganic compounds to the environment. Among all, the rapid expansion of leather related industries in Pakistan have resulted in considerable environmental problems and effluents from processing of both domestic and imported hides and skins have increased pollution to alarming levels. Some tannery effluents of Peshawar area investigated in the present study showed high concentrations of Cr(Ⅵ) (2.7-12.6 mg/L), Cu(Ⅱ) (2.6-11.4 mg/L) and phenol (0.1-4.2 mg/L). These contaminants are very toxic and must be removed from effluents before releasing into water bodies. A new technique of gamma irradiation has been investigated to decrease the load of COD and concentrations of Cr(Ⅵ), Cu(Ⅱ) and phenol associated with tannery effluents to the permitted values. It was observed that concentration of Cr(Ⅵ) in the effluents can be brought to the permitted level by applying radiation dose of 3 kGy. A radiation dose of 2.5 kGy was required to remove more than 95% of Cu(Ⅱ) and 100 % degradation of phenol in tannery effluents could be achieved by only one kGy of radiation dose.     

Predicting axial piston pump performance using neural networks

A neural network model for an axial piston pump (bent-axis design) is derived in this paper. The model uses data obtained from an experimental setup. The purpose of this ongoing study is the reduction of the power loss at high pressures. However, at the beginning, a study is being done to predict the behavior of the current design of the pump. The neural network model has a feedforward architecture and uses the Levenberg–Marquardt optimization technique in the training process. The model was able to predict the behavior of the pump accurately.     

Ergogenic Attributes of Young and Mature Coconut (Cocos nucifera L.) Water Based on Physical Properties,Sugars and Electrolytes Contents

The present work aimed to compare the main ergogenic attributes of two commercialized stages (young and mature) of coconut water (CW) obtained from four coconut varieties. The changes of electrolytes and sugars in CW upon maturation were quantified by inductively coupled plasma mass spectrophotometer and high-performance liquid chromatography, respectively. Based on the electrolyte profiling, potassium yielded the highest amount (ranging from 237.41 to 361.20 mg/100 mL) followed by sodium, magnesium, calcium, iron, manganese, copper, selenium, and zinc across all the maturity stages tested. For sugars, there were lower amounts of fructose and glucose, but a higher amount of sucrose with the maturation of the fruits. In conclusion, the amount of beneficial nutrients in the form of sugars and minerals was higher than that of young CW, and the ergogenic attributes of mature CW especially from MATAG variety (M-MATAG) were the best to be exploited further in the development of natural energy drinks.     

Effect of processing on the composition and oxidative stability of coconut oil

The effect of various processing procedures on the composition and oxidative stability of coconut oil has been studied. The crude oil is relatively stable but major reductions in oxidative stability occur during the bleaching of oil degummed with phosphoric acid; during alkali refining; during the deodorization of oil degummed with citric acid and bleached; and during the deodorization of oil processed with a combined phosphoric acid degumming and bleaching operation. The reasons for the loss of oxidative stability during processing are discussed with reference to changes in the composition of the oil. Residual traces of citric acid or phosphoric acid play an important role in stabilizing processed oils. The tocopherol content is also important, although no additional stabilization of the oil occurs on adding levels of tocopherol above those present naturally in the crude oil. A combined phosphoric acid degumming and bleaching process leads to smaller losses of tocopherols than sequential treatments.     

Two-step purification strategy for enhanced recovery of recombinant hepatitis B surface antigen from Pichia pastoris

Univariate screening on factors affecting the purification performance of recombinant hepatitis B surface antigen (HBsAg) on ion exchange chromatography (IEC) and size exclusion chromatography (SEC) and the establishment of a two-step purification strategy were performed. Amongst four IEC adsorbents examined, the use of Q Sepharose XL IEC adsorbent under optimized conditions together with optimized SEC purification was able to efficiently purify HBsAg. An established purification strategy comprising the two techniques further demonstrated adaptability for scale-up operations with a final total purification factor (PF) of 94.82 ± 16.20, HBsAg purity of 95.48% and recovery yield of 78.07%.     

Vanadium oxide supported γ-alumina with bimodal porous structure for intra-particle diffusion enhancement in styrene oxidation reaction

Porous γ-alumina with well arranged secondary mesopores has been contrived using nanosized templating units. The pore size of templated mesopores is precisely controlled as the pore shrinkage is insignificant. The primary pore diameter is ca. 4 nm and the secondary pore diameter is ca. 50 nm. The porous material was characterized using N₂ adsorption/desorption, TEM, XRD and FT-IR. γ-alumina with bimodal pore size distribution shows improved intra-particle diffusion compared to γ-alumina with unimodal pore size distribution in a simple dye adsorption test. γ-alumina with different porous structures were then impregnated with vanadium oxide for catalytic effect comparison. It was perceived that secondary pores improve the styrene oxidation rate after the conversion of styrene reaches 30%.     

Chitosan Functionalized with Carboxyl Groups as a Recyclable Biomaterial for the Adsorption of Cu (II) and Zn (II) Ions in Aqueous Media

The modification of chitosan represents a challenging task in obtaining biopolymeric materials with enhanced removal capacity for heavy metals. In the present work, the adsorption characteristics of chitosan modified with carboxyl groups (CTS-CAA) towards copper (II) and zinc (II) ions have been tested. The efficacy of the synthesis of CTS-CAA has been evaluated by studying various properties of the modified chitosan. Specifically, the functionalized chitosan has been characterized by using several techniques, including thermal analyses (differential scanning calorimetry and thermogravimetry), spectroscopies (FT-IR, XRD), elemental analysis, and scanning electron microscopy. The kinetics and the adsorption isotherms of CTS-CAA towards both Cu (II) and Zn (II) have been determined in the aqueous solvent under variable pH. The obtained results have been analyzed by using different adsorption models. In addition, the experiments have been conducted at variable temperatures to explore the thermodynamics of the adsorption process. The regeneration of CTS-CAA has been investigated by studying the desorption process using different eluents. This paper reports an efficient protocol to synthesize chitosan-based material perspective as regenerative adsorbents for heavy metals.