Water Pricing in Irrigated Agriculture

Access to water is viewed as a basic human right, a social necessity and a critical environmental resource in spite of the fact that water also has its own financial and economic values. Thus, the selection of set prices and pricing mechanisms addressing these contradicting views is remarkably complicated. On the other hand, water pricing is typically viewed as a good means to cover initial costs and sustain resources invested in water systems development, especially irrigated agriculture. Additionally, the cost of water services needs to be reasonable enough and linked to the amount of water consumed to encourage conservation. This paper illustrates criteria for equitable cost sharing, which include economic justification, efficiency and equity as well as users' acceptance. Elements of agricultural water pricing are also discussed. These elements comprise: the cost of water services, which is the total cost associated with irrigated agricultural systems development; the value of water, which reflects water's economic, social, environmental, cultural and religious values in the society; and the cost recovery mechanisms, which are the organizational and administrative measures to implement agreed upon policies to value water and services and make the collections.     

The effect of adjacent channel interference on the capacity of FDMAcellular systems

In FDMA cellular radio systems, the adjacent channel interference (ACI) is suppressed by the IF filter and also by a distance factor. Channels immediately adjacent to each other in frequency are assigned to different cells and, as such, the distance plays a role in reducing their mutual interference. The authors study the feasibility of optimizing the frequency spacing between carriers such that the combined effect of distance and IF filter will be enough to control the interference while allowing the maximum number of channels in a given bandwidth. They also study the decision feedback equalizer (DFE) as a means to reduce any excess ACI that results from reducing the channel spacing. The paper starts with a model that estimates the cumulative probability density of the signal to adjacent channel interference ratio (SIR) as a function of the channel spacing. They then present the results of a computer simulation study to estimate the performance of DFE in mitigating the effect of ACI. The results indicate that, under the conditions of slow flat fading and selection diversity, the DFE is very effective in reducing the effect of excess ACI interference which allows for a considerable reduction in the frequency spacing     

Influence of fretting on the fatigue strength at the vise clamp-specimen interface

Fretting fatigue is one of the most important phenomena for inducing a significant reduction of fatigue strength and consequently, leading to unexpected failure accidents of the engineering structures even at very low stresses. In the present study, both plain and fretting fatigue tests with zero mean stress were carried out on two different types of steel, low-carbon steel and martensitic stainless steel, by means of a reversed bending fatigue testing machine. The drop in the fatigue strengths through fretting at vise clamp-specimen interface were significant for both tested steels. The fretting processes produced a reduction in fatigue strength of about 27% for low-carbon steel and 16% for martensitic stainless steel.     

Une architecture massivement parallèle intégrée

This paper presents a new massively parallel MIMD architecture, halfway between the Connection Machine and hypercubes based on 32-bit processors. It is built from specific 8-bit processors arranged in a 2-D grid and communicating by message transfers. We discuss the communication problems, the instruction set of the basic processing unit, the programmation of the whole array and the use of a high level data-flow language.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

Morphologic and morphometric analysis of testis of Pseudis limellum (Cope, 1862) (Anura, Hylidae) during the reproductive cycle in the Pantanal, Brazil

The spermatogenesis of Pseudis limellum, from the Southern Pantanal, Brazil, was studied from July 1995 to May 1996, through histological sections of the testis. The cells could be differentiated as: primary spermatogonia, large cells, generally with bilobed nucleus; secondary spermatogonia, smaller cells, with darker cytoplasm, chromatin of radial form; primary and secondary spermatocytes, differentiated according to the different stages of the nucleus during the successive cells divisions. Furthermore, we observed cells in process of morphologic differentiation: rounded spermatids much smaller, with nucleus containing chromatin in compacting process and cytoplasm reduction; elongated spermatids, generally parallel organized in well defined bundles, with the anterior region directed toward the periphery of the seminiferous tubule and the tail directed toward the lumen. Spermatozoa are free in the lumen of the seminiferous tubule. All the cells are organized as cysts, which are supported by a large amount of Sertoli cells. The spermatogenesis in P. limellum is very similar to that of other anurans, but peculiarities were observed regarding the organization of the germ cells, the great amount of free Sertoli cells in the lumen of testis collected in May, and the long cytoplasmatic extensions of the cells bearing pigments and involving the seminiferous tubule. The diameter of the seminiferous tubule (SD) exhibited an annual mean of 251.79 +/- 37.57 microm. Spermatozoa number by seminiferous tubule (SN) exhibited an annual mean of 306.66 +/- 39.83, also with higher and lower values at each month. Variations in SD and SN were not significantly correlated with climatic variables. In this species, reproduction occurs throughout the year in ponds and flooded areas, despite the seasonal climate of the Pantanal. Although males varied in their annual reproductive activity, they were considered potentially reproductive in all months throughout the year.     

Study of the effective parameters on mechanical and electrical properties of carbon black filled PP/PA6 microfibrillar composites

In this study the electrical and mechanical properties of microfibrillar polypropylene (PP)/polyamide6 (PA6) blend filled with super conductive carbon black (CB) have been investigated. In situ microfibrillar PP/PA6 composites filled with CB are produced using a single screw extruder equipped with a spinneret. Glycidyl methacrylate (GMA) grafted polypropylene (PP-g-GMA) is used as the compatibilizer. To investigate the effects of extensional flow on the microstructure, electrical and mechanical properties, three adaptors with various convergence angles were designed, prepared and applied between the extruder and the spinneret. To optimize the effects of processing and material parameters on the electrical and mechanical properties, the Taguchi method of experimental design is used. Material and processing factors which are studied include: concentration of PA6, compatibilizer level, CB concentration, drawing speed of melt spinning line, adaptor angle, order of mixing and temperature profile along the extruder. The results show an increase in DC conductivity of up to 10¹¹ times in comparison with pure PA6, by increasing the concentration of CB, drawing speed, adaptor angle and optimizing other parameters. By optimizing processing and material factors studied here, strength of microfibrillar structured composites is increased of up to 80% in comparison to pure PP.     

Enzymic and in sacco methods to estimate rumen degradation of food protein in cattle

BACKGROUND: Two factorial studies compared enzymic and in sacco methods to estimate degradation of ruminant foods. Enzyme degradation (in vitro = enzyme) was determined from the release of leucine‐equivalent amino acid (LA) crude protein (CP) from sunflower meal (SF), maize gluten meal (MG), distillers' dark grain (DG) and field beans (FB) after their separate incubations with Streptomyces griseus enzyme for 0–24 h. In sacco crude protein (CP) degradation of these foods was estimated during washing (0 h) and rumen incubations in fistulated cows for 2–24 h. The LA data were expressed as g LA per either kg of CP (LACP) or acid‐hydrolysable LA (HLA) of each food and compared with in sacco data. RESULTS: These methods showed comparable degradation with time (P < 0.01). The in sacco and HLA were greater than LACP for all foods except MG where in sacco value was either lower or equal to LACP depending upon the incubation time (P > 0.05 or P < 0.05). Conversely, HLA was significantly (P < 0.01) greater than LACP from 2 h onwards. At 0 h, in sacco values were significantly greater than those of enzyme for SF, DG and FB (P < 0.05) but not for MG. The foods differed significantly for degradation constants (a, b, c) in each method (P < 0.05). CONCLUSIONS: Despite variations between in sacco and enzyme estimates for different foods, the relationships between these estimates suggest that the HLA enzyme method has the potential to estimate food degradation. Copyright © 2007 Society of Chemical Industry     

Glass‐fiber‐reinforced wood/plastic composites

The usage of wood‐plastic composites (WPCs) is rapidly growing because of their many advantages. However, they still suffer from lack of strength and toughness, which can be improved by adding a small amount of glass fiber reinforcement (GFR). Tensile tests of high‐density polyethylene WPC specimens with varying amounts of wood fiber content and 5% of GFR were carried out. Significant improvements in properties were observed. J. VINYL ADDIT. TECHNOL., 2008. © 2008 Society of Plastics Engineers.