Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Aloe vera gel: a new thickening agent for pigment printing

An attempt was made to print cotton fabric with pigments using a new thickening agent based on Aloe vera gel in combination with sodium alginate. The results were compared with the standard conventional printing recipe containing synthetic thickener, and a favourable effect of Aloe vera introduction was achieved. The results show that the properties of the printed fabric (sharpness, colour yield, overall fastness properties, softness, and water vapour transmission) are dependent on the percentage of Aloe vera gel in the thickener combination, the concentration of printing auxiliaries, and the curing conditions. Optimal printing properties were achieved by using a printing paste containing 80% Aloe vera/20% sodium alginate (700 g kg^?1), pigment (50 g kg^?1), binder (145 g kg^?1), fixer (10 g kg^?1), and ammonium sulfate (5 g kg^?1), followed by drying at 85 °C for 5 min and curing at 150 °C for 3 min. The sample printed with the new recipe showed superior rubbing fastness and handle properties, with a slightly lower colour yield, when compared with the sample printed with synthetic thickener. Finally, economic issues arising from synthetic thickener substitution are highlighted.     

Kinetics of oxidative cracking of n‐hexane to olefins over VOx/Ce‐Al2O3 under gas phase oxygen‐free environment

The kinetics of oxidative cracking of n‐hexane to olefins using lattice oxygen of VO_x/Ce‐Al₂O₃ is investigated. The TPR/TPO analysis shows a consistent reducibility (79%) of VO_x/Ce‐Al₂O₃ in repeated redox cycles. The total acidity of the sample is found to be 0.54 mmol/g with 22% are strong acid sites that favors olefin selectivity. The oxidative cracking of n‐hexane in a fluidized CREC Riser simulator gives approximately 60% olefin selectivity at 30% n‐hexane conversion. A kinetic model is developed considering (1) cracking, (2) oxidative dehydrogenation (ODH), and (3) catalyst deactivations. The proposed cracking mechanism considers adsorption, C–H and C–C bond fission and desorption as elementary steps and implemented by pseudo steady state hypothesis. A Langmuir‐Hinshelwood mechanism is found to represent the ODH reactions. The developed model fits the experimental data with favorable statistical indicators. The estimated specific reaction rate constants are also found to be consistent with the product selectivity data. © 2016 American Institute of Chemical Engineers AIChE J, 63: 130–138, 2017     

Glass microparticle- versus microsphere-filled experimental dental adhesives

This study aimed to formulate antibacterial dental adhesives. Phosphate-substituted methacrylate adhesives were modified with 0–20 wt % copper-doped glass microparticles. Two shapes of microparticles were used: regular shaped (microspheres) and irregular shaped (microparticles). The morphology/composition, roughness, monomer conversion (DC%), thermogravimetric analysis, and antibacterial action against S. mutans and P. aeruginosa and ion release were investigated. The results showed that microspheres produced adhesives with a relatively smoother surface than microparticles did. The DC% of adhesives increased with increasing glass filler content. Filled adhesives showed polymer decomposition at ~315 °C and glass melting at 600–1000 °C. The weight loss percent of adhesives decreased with increasing weight percent of fillers. Glass microparticles at 0–20 wt % significantly increased the antibacterial action of adhesives against both bacteria. Glass microspheres at 0–5 wt % significantly increased the antibacterial action of adhesives against both bacteria. Only 20 wt % microparticle-filled adhesive showed an inhibition zone similar to tobramycin (positive control). Microparticle-filled adhesives (with >5 wt % filler) significantly reduced S. mutans more than their microsphere counterparts. Microsphere-filled adhesives (with ≤5 wt % filler) significantly reduced P. aeruginosa more than their microparticle counterparts. Microsphere-filled adhesives showed higher Cu release than their microparticle counterparts. Accordingly, phosphate-substituted methacrylate filled with glass could be used as an antibacterial adhesive. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47832.     

Magnetic,Dielectric and Complex Impedance Properties of xBa_(0.95)Sr_(0.05)TiO_3–(1-x)BiFe_(0.9)Gd_(0.1)O_3Multiferroic Ceramics

xBa_(0.95)Sr_(0.05)TiO_3–(1-x)BiFe_(0.9)Gd_(0.1)O_3[x BST–(1-x)BFGO](x = 0.00, 0.10, 0.20 and 0.25) multiferroic ceramics were prepared by the standard solid-state reaction technique. Structural characterization was performed by X-ray diffraction. All the samples showed rhombohedral distorted perovskite structure. Surface morphology of the ceramics was studied by the field emission scanning electron microscope(FESEM). From the FESEM observation, the grain size was observed to be decreased with increasing BST content. Enhanced magnetic properties were observed in BFGO with the increase in BST content because of large lattice distortion. The complex initial permeability increased with the increasing of BST content. The study of dielectric properties showed that the dielectric constant increased, whereas dielectric loss decreased with increasing of BST content due to the reduction of oxygen vacancies. An analysis of the electric impedance and modulus with frequency was performed at different temperatures. Non-Debye-type relaxation processes occur in the compound which was confirmed from the nature of the Cole–Cole plot. The DC conductivity was found to increase with the rise in temperature which indicates the semiconducting behavior of the compound with characteristics of the negative temperature coefficient of resistance. The activation energy, responsible for the relaxation determined from the modulus spectra(0.246 eV), was found to be almost same as the value obtained from the impedance study(0.240 eV), indicating that charge carriers overcome the same energy barrier during relaxation. The frequency response of imaginary parts of electric impedance and modulus suggested that the relaxation in xB ST–(1-x)BFGO ceramics follows the same mechanism at various temperatures.     

Alumina Dissolution into Silicate Slag

Dissolution of commercial white fused and tabular Al₂O₃ grains into a model silicate slag was investigated after 1 h at 1450° and 1600°C. Formation of CA₆ and hercynitic spinel layers was observed at all Al₂O₃/slag interfaces. The spinel layer was not always continuous, and so, compared with the CA₆ layer, it had a less-significant effect on the dissolution process. The CA₆ layer that formed adjacent to the tabular Al₂O₃ was incomplete at both temperatures, so that its dissolution was not a totally indirect process. These incomplete CA₆ and spinel layers meant that slag penetrated into the tabular Al₂O₃ grains, which, thus, were corroded and disintegrated by the penetrating slag. There was evidence of liquid in the CA₆ layer adjacent to the fused Al₂O₃ after 1 h at 1450°C, which also enabled direct dissolution. After 1 h at 1600°C, fused Al₂O₃ revealed a thick (∼60 μm), continuous and unpene-trated CA₆ layer, indicating fully indirect dissolution at this temperature.     

Anaerobic biogas generation from sugar industry wastewaters in three‐phase fluidized‐bed bioreactor

In the present study, attempts are made to optimize digestion time, initial feed pH, feed temperature, and feed flow rate (organic loading rate, OLR) for maximum yield of methane gas and maximum removal of chemical oxygen demand (COD) and biological oxygen demand (BOD) of sugar industry wastewaters in three‐phase fluidized‐bed bioreactor. Methane gas is analysed by using flame‐ionisation detector (FID). The optimum digestion time is 8 h and optimum initial pH of feed is observed as 7.5. The optimum temperature of feed is 40°C and optimum feed flow rate is 14 L/min with OLR 39.513 kg COD/m³ h. OLR is calculated on the basis of COD inlet in the bioreactor at different flow rates. The maximum methane gas concentration is 61.56% (v/v) of the total biogas generation at optimum biomethanation process parameters. The maximum biogas yield rate is 0.835 m³/kg COD/m³ h with maximum methane gas yield rate (61.56%, v/v) of 0.503 m³/kg COD/m³ h at optimum parameters. The maximum COD and BOD reduction of the sugar industry wastewaters are 76.82% (w/w) and 81.65% (w/w) at optimum biomethanation parameters, respectively.     

Melatonin Modulates Plant Tolerance to Heavy Metal Stress: Morphological Responses to Molecular Mechanisms

Heavy metal toxicity is one of the most devastating abiotic stresses. Heavy metals cause serious damage to plant growth and productivity, which is a major problem for sustainable agriculture. It adversely affects plant molecular physiology and biochemistry by generating osmotic stress, ionic imbalance, oxidative stress, membrane disorganization, cellular toxicity, and metabolic homeostasis. To improve and stimulate plant tolerance to heavy metal stress, the application of biostimulants can be an effective approach without threatening the ecosystem. Melatonin (N-acetyl-5-methoxytryptamine), a biostimulator, plant growth regulator, and antioxidant, promotes plant tolerance to heavy metal stress by improving redox and nutrient homeostasis, osmotic balance, and primary and secondary metabolism. It is important to perceive the complete and detailed regulatory mechanisms of exogenous and endogenous melatonin-mediated heavy metal-toxicity mitigation in plants to identify potential research gaps that should be addressed in the future. This review provides a novel insight to understand the multifunctional role of melatonin in reducing heavy metal stress and the underlying molecular mechanisms.     

Synthesis of onion-like mesoporous silica from sodium silicate in the presence of α,ω-diamine surfactant

Mesoporous silicas with vesicular and onion-like morphologies were assembled through hydrogen-bonding pathway from sodium silicate as silica source and electrically neutral α,ω-diamine, Jeffamine D2000 surfactant (H₂NCH(CH₃)CH₂[OCH₂CH(CH₃)]₃₃NH₂) as template in aqueous media at different synthesis temperatures (25, 60 and 100 °C). Assembling the material at 100 °C afforded onion-like core shell mesoporous silica, while at relatively lower temperature, e.g. 25 and 60 °C, multilamellar vesicles were obtained. Mesoporous silica with onion-like morphology was also obtained by a two-step synthesis involving an aging period of 20 h at room temperature followed by a hydrothermal stage (1–12 h) at 100 °C. The heavily cross-linked (Q⁴/Q³ ratio of 4.43) onion-like mesophase silica exhibited high hydrothermal stability. The BET surface area, pore volume and KJS (Kruk-Jaroniec-Sayari) pore diameter of the onion-like mesoporous silica were found to be 464 m² g⁻¹, 1.16 m³ g⁻¹ and 7.2 nm, respectively.