A Stretchable and Flexible Cardiac Tissue–Electronics Hybrid Enabling Multiple Drug Release,Sensing, and Stimulation

Replacement of the damaged scar tissue created by a myocardial infarction is the goal of cardiac tissue engineering. However, once the implanted tissue is in place, monitoring its function is difficult and involves indirect methods, while intervention necessarily requires an invasive procedure and available medical attention. To overcome this, methods of integrating electronic components into engineered tissues have been recently presented. These allow for remote monitoring of tissue function as well as intervention through stimulation and controlled drug release. Here, an improved hybrid microelectronic tissue construct capable of withstanding the dynamic environment of the beating heart without compromising electronic or mechanical functionality is reported. While the reported system is enabled to sense the function of the engineered tissue and provide stimulation for pacing, an electroactive polymer on the electronics enables it to release multiple drugs in parallel. It is envisioned that the integration of microelectronic devices into engineered tissues will provide a better way to monitor patient health from afar, as well as provide facile, more exact methods to control the healing process.     

Deviation of Fiber Tracts in the Vicinity of Brain Lesions: Evaluation by Diffusion Tensor Imaging

Diffusion Tensor Imaging (DTI) is used to characterize the diffusion properties of deviated white matter caused by brain tumors. DTI was recently shown to be very helpful in delineating white matter both within brain lesions and surrounding them. Displacement of white matter fibers may be one of the consequences of tumor growth adjacent to white matter. The combination of white matter mapping with DTI and gray matter mapping using functional MRI, in some cases, facilitated assessment of the relation between the shifted cortical areas and the corresponding white matter tracts. We found that the fractional anisotropy extracted from DTI is increased by 38% in areas of non-edematous shifted white matter fibers. By contrast, trace apparent diffusion coefficient (ADC) values in those areas were found to be similar to contralateral side and normal control values. Analysis of the three diffusion tensor eigenvalues revealed that the increase in the fractional anisotropy is a result of two processes. The first is the increase in the diffusion parallel to the fibers—λ₁ (by 18%), and the second is the decrease in the diffusion perpendicular to fibers—λ₃ (by 34%) as compared with the contralateral side. These opposing changes cause an increase in the diffusion anisotropy but no change in the trace ADC. It is suggested that the pressure caused by the tumor may lead to an increase in white matter fiber tension, thus causing an increase in λ₁. On the other hand, the same pressure causes increased fiber density per unit area, leading to a higher degree of restricted diffusion in the extracellular space and, hence, a reduction in λ₃.     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...     

Cobalt catalysts derived from hydrotalcite-type precursors applied to steam reforming of ethanol

Catalysts derived from Co/Mg/Al hydrotalcite-type precursors modified with La and Ce were characterized by XANES and tested in ethanol steam reforming. The reaction data showed that, with a molar ratio of water:ethanol = 3:1 in the feed, addition of Ce and La favored acetaldehyde production. Increasing the water content (water:ethanol = 5:1) decreased the acetaldehyde formation by favoring the adsorption of water molecules on these samples, enhancing the acetaldehyde conversion.     

Sentinel 2 analysis of turbidity retrieval models in inland water bodies: The case study of Jordanian dams

This study investigates the potential of using Sentinel 2 multispectral satellite images to develop turbidity retrieval models and further estimate the turbidity values of inland water bodies in Jordan. Traditionally, laboratory analysis has been used to assess surface water quality, which is expensive, time-consuming, and requires accessing the field physically. In contrast, remote sensing technologies can detect the water contaminant level at a consistent spatial and temporal coverage. Turbidity is an essential indicator of inland water quality as it directly reflects under-water light penetration. This study was held in three Jordanian dams, King Talal Dam, Mujib Dam, and Wadi Al Arab Dam, which vary in their water quality level. Twenty water samples were collected from each dam. Forty samples were used to calibrate the models, and the rest samples were used to validate the predictive models. The results show that Sentinel 2 near-infrared band to green band (B8/B3) achieved high fitting accuracies with R² = 0.832 and root mean square error (RMSE) = 1.123 NTU. Overall, this study has demonstrated the ability of Sentinel 2 data to estimate the turbidity in different ranges of inland water bodies’ quality and indicates that remote sensing can be used as an efficient tool for monitoring inland water quality. This study presents empirical data that could act as a platform to extend future work to cover more sites and contexts.     

Carbon dioxide reforming of ethanol over Ni/Y2O3–ZrO2 catalysts

Supported nickel catalysts of composition Ni/Y₂O₃–ZrO₂ were synthesized in one step by the polymerization method and compared with a nickel catalyst prepared by wet impregnation. Stronger interactions were observed in the formed catalysts between NiO species and the oxygen vacancies of the Y₂O₃–ZrO₂ in the catalysts made by polymerization, and these were attributed to less agglomeration of the NiO during the synthesis of the catalysts in one step. The dry reforming of ethanol was catalyzed with a maximum CO₂ conversion of 61% on the 5NiYZ catalyst at 800 °C, representing a better response than for the catalyst of the same composition prepared by wet impregnation.     

Novel supports for nickel-based catalysts for the partial oxidation of methane

Zirconia-supported nickel catalysts with different amounts of aluminum (Al/Zr = 0.2, 1 and 2) were studied in this work in order to find alternative supports for nickel-based catalysts for the partial oxidation of methane. This reaction is a promising route for producing hydrogen and syngas for different applications. Samples were prepared by precipitation and impregnation techniques, characterized by several techniques and evaluated in the partial oxidation of methane in the range of 450–750 °C and 1 atm. It was found that aluminum affects the textural and catalytic properties of zirconia-supported nickel catalysts. The tetragonal phase of zirconia was stabilized by aluminum and gamma-alumina was also found in the aluminum-richest samples. Aluminum increased the porosity and the specific surface area of the solids. The catalytic activity also increased with the amount of aluminum in solids probably due to the stronger interaction of nickel with the support, which slowly generates active sites during the reduction step. The methane conversion and hydrogen selectivity increased with temperature, indicating no deactivation. The hydrogen to carbon monoxide molar ratio decreased due to aluminum but was not significantly affected by temperature. The coke produced was not harmful to the catalysts and aluminum affected its amount, although no simple relationship was found between these parameters. The most promising catalyst was the sample with aluminum to zirconium molar ratio of 2, which showed high activity and hydrogen selectivity and was stable under the reaction condition.     

Single phase multi color emitting Ca2LuTaO6: Dy3+/Eu3+ double perovskite oxide phosphors

The trivalent rare-earth (RE³⁺) doped phosphors show tremendous achievement in narrow band multicolor line emission for various applications. However, the 4f–4f absorption transition of these ions is forbidden in UV and blue light excitation. Usually, a sensitizer having spin allowed transition was used as a co-dopant to excite these ions via the energy transfer phenomenon. Another approach promisingly using to excite these ions by efficient energy transfer from the intrinsic emission of the Ca₂LuTaO₆ double perovskite phosphors host lattice. Phosphors of Ca₂LuTaO₆ with double perovskite structure were synthesized by using a high-temperature solid-state reaction method. The produced Ca₂LuTaO₆ double perovskite phosphors show an intrinsic broad band emission centered at 424 nm under the excitation of 313 nm UV light. The origin of this broad band blue emission was deeply investigated by using computation and experimental approaches. The trivalent activator Dy³⁺ and Eu³⁺ were doped is a single and co-dopant in the produced Ca₂LuTaO₆ phosphors to check their excitation in UV and near-UV spectral region. X-ray diffraction and scanning electron microscopy were used to investigate the structure and phase analysis. Various characterizations such as photoluminescence excitation, emission, and CIE chromaticity coordinates were measured which illustrate the potential of Dy³⁺ and Eu³⁺ activated Ca₂LuTaO₆ double perovskite phosphors for narrow band multicolor line emission for various applications.     

Molecular Mechanisms of Skewed X-Chromosome Inactivation in Female Hemophilia Patients—Lessons from Wide Genome Analyses

Introduction: Hemophilia A (HA) is an X-linked bleeding disorder caused by factor VIII (FVIII) deficiency or dysfunction due to F8 gene mutations. HA carriers are usually asymptomatic because their FVIII levels correspond to approximately half of the concentration found in healthy individuals. However, in rare cases, a carrier may exhibit symptoms of moderate to severe HA primarily due to skewed inactivation of her non-hemophilic X chromosome. Aim: The aim of the study was to investigate X-chromosome inactivation (XCI) patterns in HA carriers, with special emphasis on three karyotypically normal HA carriers presenting with moderate to severe HA phenotype due to skewed XCI, in an attempt to elucidate the molecular mechanism underlying skewed XCI in these symptomatic HA carriers. The study was based on the hypothesis that the presence of a pathogenic mutation on the non-hemophilic X chromosome is the cause of extreme inactivation of that X chromosome. Methods: XCI patterns were studied by PCR analysis of the CAG repeat region in the HUMARA gene. HA carriers that demonstrated skewed XCI were further studied by whole-exome sequencing (WES) followed by X chromosome-targeted bioinformatic analysis. Results: All three HA carriers presenting with the moderate to severe HA phenotype due to skewed XCI were found to carry pathogenic mutations on their non-hemophilic X chromosomes. Patient 1 was diagnosed with a frameshift mutation in the PGK1 gene that was associated with familial XCI skewing in three generations. Patient 2 was diagnosed with a missense mutation in the SYTL4 gene that was associated with familial XCI skewing in two generations. Patient 3 was diagnosed with a nonsense mutation in the NKAP gene that was associated with familial XCI skewing in two generations. Conclusion: Our results indicate that the main reason for skewed XCI in our female HA patients was negative selection against cells with a disadvantage caused by an additional deleterious mutation on the silenced X chromosome, thus complicating the phenotype of a monogenic X-linked disease. Based on our study, we are currently offering the X inactivation test to symptomatic hemophilia carriers and plan to expand this approach to symptomatic carriers of other X-linked diseases, which can be further used in pregnancy planning.     

Experimental and modeling asphaltene precipitation in presence of DBSA using PC-SAFT EOS

Asphaltene precipitation and subsequent deposition in production tubing and topside facilities present significant cost penalties to crude oil production. Therefore, it is highly desirable to predict their phase behavior and the efficiency of dispersants in preventing or delaying deposition. Very few studies have been carried out on the molecular interactions between asphaltenes and different dispersants. As a result, the mechanisms by which dispersants stabilize asphaltenes are still open to discussion. The authors introduced a new method to characterize asphaltenes in perturbed chain statistical association fluid theory equation of state (EOS; perturbed-chain statistical association fluid theory EOS [PC-SAFT-EOS]) and correctly model the effect of dodecyl benzene sulfonic acid (DBSA) dispersant on the thermodynamic behavior of asphaltenes. Using the filtration method the effect of the ionic dispersant (DBSA) on asphaltene precipitation for different concentrations of n-heptane was measured experimentally, then modeled through PC-SAFT EOS. In the approach only the hard-chain and the dispersion terms are taken into consideration, and PC-SAFT parameters were calculated based on Gonzales et al. (2007 Gonzalez, D. L., Hirasaki, G. J., Creek, J., and Chapman, W. G. (2007). Modeling of asphaltene precipitation due to changes in composition using the perturbed chain statistical associating fluid theory equation of state. Energy Fuels 21:1231–1242.[Crossref], [Web of Science ®] , [Google Scholar]) based on molecular weight (Mw) and aromaticity factor (γ). Additionally, the model could correctly predict the amount of asphaltene precipitation upon addition of DBSA dispersant.