Controllable Synthesis of NiSe<Subscript>2</Subscript> Nanostructures via Hydrothermal Process for Photocatalytic and Solar Cell Applications

This paper reports on the synthesis of rice-like NiSe₂ nanoparticles via a simple hydrothermal method by employing [bis(2-hydoxyacetophenato)nickle(II)], [Ni(HAP)₂], as a novel nickel precursor. Effect of nickel source on morphology and size of nanostructures was also investigated. Moreover, the as-synthesized NiSe₂ nanostructures were utilized as the photocatalyst for the degradation of methylene blue (MB) and as the counter electrode in dye-sensitized solar cells. The results showed that structures size and morphology have salient effect on solar cells and using rice-like NiSe₂ nanoparticles leads to an increase in DSSCs efficiency compared to agglomerated sphere-like particles from 6.04 to 8.99?% (~49?% improvement).     

Design and implementation of a relational database of macroscopic cross-sections for steady-state and transient analysis in a medium sized PWR

This paper deals with the design and implementation of a relational database of macroscopic cross-sections as well as validation and its usage as a component in steady-state and transient analysis. These types of analysis are definitely designated as data-driven processes in which their behavior is changed based on data. The data in this manner can be the variation of fuel composition density as well as the fuel temperature during the reactor operation or in some accidents. In order to gain the accurate results in transient analysis, applying these variations is inevitable. Therefore, for each changing in fuel behavior, the new set of macroscopic cross-sections must be reproduced by performing the lattice calculations at run-time. During recent years some approaches have been done in both academic and commercial areas to take advantage of already calculated cross-sections instead of recalculate them by lattice codes during the analysis. Using this approach leverages the computation performance by reducing the floating point operations which can decrease the CPU load as well as the calculation time. Although this approach delivers a good performance in terms of time and computation, when a large number of fuel or reactor core circumstances are subjected to be analyzed the accuracy is became an important point. In this situation the cross-sections for all expected conditions must be already calculated. This cause the large number of cross-section data which must be stored and managed somehow. The system applied in this study to store and manage these cross-section data sets is a relational database management system (RDBMS) which is based on Microsoft SQL Server 2008 Management System. The node wise macroscopic cross-sections for each nominal and off-nominal of a typical medium sized PWR reactor core conditions which are calculated by WIMS-D5 and CITATION codes are tabulated in this system and can be retrieved by structured query language extremely rapid on demand.     

Novel Fault Management Framework Using Markov Chain in Wireless Sensor Networks: FMMC

Wireless Personal Communications - Due to using wireless sensor nodes (WSNs) in inaccessible areas and applying limitations in making nodes to reduce costs, these networks are prone to faults. The...     

Exergetic and environmental performance improvement in cement production process by driving force distribution

This paper presents an investigation of the effects of temperature gradient distribution by the aid of a secondary burner on exergetic and environmental functions of the cement production process. For this reason, the burning system of the cement production (kiln &; preheater) process was simulated in four thermal areas. Three lines of cement production with 2,000, 2,300 and 2,600 ton/day were investigated. Fuel injection ratio into the secondary burner, from 10 to 40 percent was studied for each line. The obtained results show that, for cyclone preheaters, fuel injection into the secondary burner up to a proportion resulting in the minimum temperature required for alite formation (2,200 °C) in the kiln burning zone is suitable. For shaft preheaters, however, according to percent calcinations, there exists an optimum proportion for 15 to 20 percent injection fuel into secondary burner. Finally, it was shown that the secondary burner application can reduce the exergy losses about 25 percent, which leads to a reduction of the green house gases of about 35000 cubic meters per year for each ton per day of clinker production.     

Degradation of methotrexate by UV/peroxymonosulfate: Kinetics,effect of operational parameters and mechanism

Methotrexate (MTX) is one of the most consumed anti-cancer drugs in the pharmaceutical market around the world. The widespread occurrence of MTX in aquatic environment through hospital effluent has attracted increasing concern due to its potential to induce water pollution. In the present study, the degradation of MTX in aqueous medium was investigated by UV-activated peroxymonosulfate (PMS). A significant improvement in degradation rate by increasing UV intensity and PMS concentration while the decrease in degradation efficiency with the increase of solution pH and initial concentration of MTX was observed. The proposed UV/PMS process could achieve more than 90% MTX degradation in 30 min with a good mineralization degree (65%). A pseudofirst order kinetic model was employed and successfully predicted the degradation of MTX. The effect of other operational parameters such as the initial concentration of the targeted compound, dosage of oxidant (PMS), solution pH and UV intensity on the degradation rate were investigated. At the last, the main transform intermediates were identified using LC-MS and possible degradation pathways were proposed. The results show that UV/ PMS can be used as an efficient technology to treat pharmaceuticals such as methotrexate containing water and wastewater.     

Determination of residual organic matter in extracted oil sands using a low temperature ashing method

The application of a low temperature ashing method for estimating total residual organic matter (toluene insolubles) in oil sands is described. A linear correlation exists between organic carbon content and loss on ignition at 400 ± 10 °C of solvent extracted oil sands. The ratio between total organic carbon and the weight loss on ignition (CT/LOl) owing to the removal of residual organic matter is much lower than that obtained for toluene soluble bitumen fractions, indicating very different chemical composition for the residual organic matter. The measured carbon content of the residual organic matter in oil sands suggests that this material could be a mixture of various fractions contained in resins, asphaltenes, asphaltic acids and humic acids.     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

Development of Pure Poly Vinyl Chloride (PVC) with Excellent 3D Printability and Macro- and Micro-Structural Properties

Unmodified polyvinyl chloride (PVC) has low thermal stability and high hardness. Therefore, using plasticizers as well as thermal stabilizers is inevitable, while it causes serious environmental and health issues. In this work, for the first time, pure food-grade PVC with potential biomedical applications is processed and 3D printed. Samples are successfully 3D printed using different printing parameters, including velocity, raster angle, nozzle diameter, and layer thickness, and their mechanical properties are investigated in compression, bending, and tension modes. Scanning electron microscopy is also used to evaluate the bonding and microstructure of the printed layers. Among the mentioned printing parameters, raster angle and printing velocity influence the mechanical properties significantly, whereas the layer thickness and nozzle diameter has a little effect. Images from scanning electron microscopy  also reveal that printing velocity greatly affects the final part's quality regarding defective voids and rasters’ bonding. The maximum tensile strength of 88.55 MPa is achieved, which implies the superiority of 3D-printed PVC mechanical properties compared to other commercial filaments. This study opens an avenue to additively manufacture PVC that is the second most-consumed polymer with cost-effective and high-strength features.     

4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure,Programming, and Shape Memory Performance

In this research, polyvinyl chloride (PVC) with excellent shape-memory effects is 4D printed via fused deposition modeling (FDM) technology. An experimental procedure for successful 3D printing of lab-made filament from PVC granules is introduced. Macro- and microstructural features of 3D printed PVC are investigated by means of wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) techniques. A promising shape-memory feature of PVC is hypothesized from the presence of small close imperfect thermodynamically stable crystallites as physical crosslinks, which are further reinforced by mesomorphs and possibly molecular entanglement. A detailed analysis of shape fixity and shape recovery performance of 3D printed PVC is carried out considering three programming scenarios of cold (T_g −45 °C), warm (T_g −15 °C), and hot (T_g +15 °C) and two load holding times of 0 s, and 600 s under three-point bending and compression modes. Extensive insightful discussions are presented, and in conclusion, shape-memory effects are promising,ranging from 83.24% to 100%. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state-of-the-art shape-memory materials library for 4D printing, and provide pertinent results that are instrumental in the 3D printing of shape-memory PVC-based structures.     

Synthesis,properties, and applications of polylactic acid-based polymers

Polylactic acid (PLA) is known as one of the greatest promising bioabsorbable and compostable polyesters with the capability of high molecular weight synthesis. Lactic acid condensation, azeotropic dehydration, and condensation ring-open polymerize of lactide are three methods for PLA polymerization. Comprehension of material properties is critical for choosing the right processing method and adjusting PLA characteristics. A variety of mechanical properties of this material, from soft and elastic to stiff and high strength makes PLA suitable for a wide range of applications. Besides, PLA can be blended or copolymerized with other polymeric or non-polymeric substances. Thus, this polymer can achieve suitable chemical, mechanical, and rheological properties. Understanding the role of these properties and selecting a suitable processing technique is necessary for its intended consumer and various applications. This study elaborated a general summary of the polymerization, processing, and characteristics of PLA (i.e., structural diversities, rheological performances, mechanical properties, and permeability). Besides, this work presented some information regarding essential factors that can be used for modifying PLA properties to address the requirements for various applications such as biomedical, food packing, biocomposite, and additive manufacturing.