Distributed video coding in wireless sensor networks

This paper addresses the important aspect of compressing and transmitting video signals generated by wireless broadband networks while heeding the architectural demands imposed by these networks in terms of energy constraints as well as the channel uncertainty related to the wireless communication medium. Driven by the need to develop light, robust, energy-efficient, and low delay video delivery schemes, a distributed video coding based framework dubbed PRISM is introduced. PRISM addresses the wireless video sensor network requirements far more effectively than current state-of-the-art standards like MPEG. This paper focuses on the case of a single video camera and use it as a platform to describe the theoretical principles and practical aspects underlying distributed video coding.     

Benchmarking nanotechnology for high-performance and low-power logic transistor applications

Recently there has been tremendous progress made in the research of novel nanotechnology for future nanoelectronic applications. In particular, several emerging nanoelectronic devices such as carbon-nanotube field-effect transistors (FETs), Si nanowire FETs, and planar III-V compound semiconductor (e.g., InSb, InAs) FETs, all hold promise as potential device candidates to be integrated onto the silicon platform for enhancing circuit functionality and also for extending Moore's Law. For high-performance and low-power logic transistor applications, it is important that these research devices are frequently benchmarked against the existing Si logic transistor data in order to gauge the progress of research. In this paper, we use four key device metrics to compare these emerging nanoelectronic devices to the state-of-the-art planar and nonplanar Si logic transistors. These four metrics include: 1) CV/I or intrinsic gate delay versus physical gate length L/sub g/; 2) energy-delay product versus L/sub g/; 3) subthreshold slope versus L/sub g/; and 4) CV/I versus on-to-off-state current ratio I/sub ON//I/sub OFF/. The results of this benchmarking exercise indicate that while these novel nanoelectronic devices show promise and opportunities for future logic applications, there still remain shortcomings in the device characteristics and electrostatics that need to be overcome. We believe that benchmarking is a key element in accelerating the progress of nanotechnology research for logic transistor applications.     

Fuzzy differential inclusions in atmospheric and medical cybernetics

Uncertainty management in dynamical systems is receiving attention in artificial intelligence, particularly in the fields of qualitative and model based reasoning. Fuzzy dynamical systems occupy a very important position in the class of uncertain systems. It is well established that the fuzzy dynamical systems represented by a set of fuzzy differential inclusions (FDI) are very convenient tools for modeling and simulation of various uncertain systems. In this paper, we discuss about the mathematical modeling of two very complex natural phenomena by means of FDIs. One of them belongs to the atmospheric cybernetics (the term has been used in a broad sense) of the genesis of a cyclonic storm (cyclogenesis), and the other belongs to the bio-medical cybernetics of the evolution of tumor in a human body. Since a discussion of the former already appears in a previous paper by the first author, here, we present very briefly a theoretical formalism of cyclone formation. On the other hand, we treat the latter system more elaborately. We solve the FDIs with the help of an algorithm developed in this paper to numerically simulate the mathematical models. From the simulation results thus obtained, we have drawn a number of interesting conclusions, which have been verified, and this vindicates the validity of our models.     

Characterization and densification studies on ThO2-UO2 pellets derived from ThO2 and U3O8 powders

ThO₂ containing around 2-3% ²³³UO₂ is the proposed fuel for the forthcoming Indian Advanced Heavy Water Reactor (AHWR). This fuel is prepared by powder metallurgy technique using ThO₂ and U₃O₈ powders as the starting material. The densification behaviour of the fuel was evaluated using a high temperature dilatometer in four different atmospheres Ar, Ar-8%H₂, CO₂ and air. Air was found to be the best medium for sintering among them. For Ar and Ar-8%H₂ atmospheres, the former gave a slightly higher densification. Thermogravimetric studies carried out on ThO₂-2%U₃O₈ granules in air showed a continuous decrease in weight up to 1500 °C. The effectiveness of U₃O₈ in enhancing the sintering of ThO₂ has been established.     

Prediction of crack coalescence of steam generator tubes in nuclear power plants

Prediction of failure pressures of cracked steam generator tubes of nuclear power plants is an important ingredient in scheduling inspection and repair of tubes. Prediction is usually based on nondestructive evaluation (NDE) of cracks. NDE often reveals two neighboring cracks. If the cracks interact, the tube pressure under which the ligament between the two cracks fails could be much lower than the critical burst pressure of an individual equivalent crack. The ability to accurately predict the ligament failure pressure, called “coalescence pressure,” is important. The failure criterion was established by nonlinear finite element model (FEM) analyses of coalescence of two 100% through-wall collinear cracks. The ligament failure is precipitated by local instability of the ligament under plane strain conditions. As a result of this local instability, the ligament thickness in the radial direction decreases abruptly with pressure. Good correlation of FEM analysis results with experimental data obtained at Argonne National Laboratory’s Energy Technology Division demonstrated that nonlinear FEM analyses are capable of predicting the coalescence pressure accurately for 100% through-wall cracks. This failure criterion and FEA work have been extended to axial cracks of varying ligament width, crack length, and cases where cracks are offset by axial or circumferential ligaments.     

Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance

The present study concerns development of a hard in situ boride-dispersed composite layer on the surface of AISI 304 stainless steel substrate to improve the wear resistance property. Laser processing was carried out by melting the surface of sand-blasted AISI 304 stainless steel substrate using a continuous wave CO₂ laser and simultaneous deposition of a mixture of K₂TiF₆ (potassium titanium hexafluoride) and KBF₆ (potassium hexafloroborate) (in the weight ratio of 2:1) using Ar as shrouding environment. Powder feed rate was maintained constant at 4 g/min. Irradiation results in dissociation of a pre-deposited mixture along with a part of the stainless steel substrate, intermixing and rapid solidification to form the composite layer on the surface. The micro-structure of composite layer consists of dispersion of titanium boride particles in AISI 304 stainless steel matrix. Volume fraction of particles is found to be uniform throughout the composite layer, though varied with laser parameters. The micro-hardness of the surface was improved 250–350 VHN as compared to 220 VHN of the AISI 304 stainless steel substrate with a significant improvement in wear resistance property. The mechanism of wear was found to be a combination of adhesive and abrasive in as-received stainless steel. However, it was predominantly abrasive for laser composite surfaced stainless steel.     

Susceptibility to tropical theileriosis of calves born to dams immunized with Theileria annulata (Hisar) cell culture vaccine

Epidemiological evidence suggests that millet might play a role in the etiology of endemic goiter. Recently, we showed that a traditional fermentation procedure of two pearl millet (Pennisetum americanum L. Lecke) cultivars grown in Sudan modified their effects on the weight of the thyroid gland and thyroid hormone profile in rats. In the present study, we report that this fermentation procedure reduced the ash contents of millet by about 40% and removed considerable amounts of Mg (>50%), Zn (27-39%) and K (45%). Other minerals (Ca, Fe, Cu) were not affected. Feeding of one fermented cultivar resulted in significant reduction in bone Mg and Zn contents, whereas feeding of the other fermented cultivar resulted in reduction of bone Mg only. Dietary Mg intake and bone Mg contents correlated negatively with serum T3. Groups fed the millet diets had higher serum Se level compared to those fed wheat or casein diets and feeding of fermented millet resulted in a further increase in serum Se level. Thus our data indicate that in rats the enhanced effects of millet on the thyroid induced by fermentation is likely related to removal of minerals from millet and/or chemical transformation of the goitrogens contained in millet.     

A preclinical study of the effect of the animal polysaccharide chonsurid on reparative osteogenesis of the jaws

Experimental studies making use of morphological and x-ray methods demonstrated that in comparison with control (filling of mandibular bone defects with blood clots) chonsuride, an animal polysaccharide, promoted earlier filling of postoperative bone cavities with connective tissue replacement of this tissue with coarse-fiber bone tissue. Secondary restructuring and mineralization of bone regenerate were enhanced as well.     

Part I. The microstructural evolution in Ti-Al-Nb O+Bcc orthorhombic alloys

Phase transformations and the resulting microstructural evolution of near-Ti₂AlNb and Ti-12Al-38Nb O+bcc orthorhombic alloys were investigated. For the near-Ti₂AlNb alloys, the processing temperatures were below the bcc transus, while, for Ti-12Al-38Nb, the processing temperature was supertransus. Phase evolution studies showed that these alloys contain several constituent phases, namely, bcc, O, and α ₂; when present, the latter was in small quantities compared to the other phases. The transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray investigations of samples that were solutionized and water quenched were used to estimate the phase fields, and a pseudobinary diagram based on Ti=50 at. pct was modified. The aging-transformation behavior was studied in detail. For solutionizing temperatures between 875 °C and the bcc transus, the phase composition and volume fraction of the near-Ti₂AlNb alloys adjusted through relative size changes of the equiaxed B2, O, and α ₂ grains. The aging behavior followed three distinct transformation modes, dependent on the solutionizing and aging temperatures. Widmanstatten formation was observed when a new phase evolved from a parent phase. Thus, Widmanstatten O phase precipitated within the B2 phase for supertransus fully B2 microstructures, as well as for substransus α ₂+B2 microstructures. Similarly, Widmanstatten B2 phase can form from a fully O microstructure, a transformation that has not been observed before. In the case of equiaxed O+B2 solutionized and water-quenched microstructures, Widmanstatten O-phase formation occurred only below 875 °C. For the subtransus-solutionized and water-quenched microstructures, a second aging transformation mode, cellular precipitation, was dominant below 750 °C. This involved formation of coarse and lenticular O phase that grew into the prior B2 grains from the grain boundaries. A third transformation mode involved composition-invariant transformation, where the fully B2 supertransus-solutionized and water-quenched microstructure transformed to a fully O microstructure at 650 °C. This microstructure reprecipitated B2 phase out of the O phase with continued aging time. For Ti-12Al-38Nb, Widmanstatten O precipitation remained the only transformation mode. It is shown that subtransus processing offers flexibility in controlling microstructures through postprocessing heat treatments.