A high-speed vector-controlled spindle motor drive with closedtransition between with encoder control and without encoder control

A 40000-r/min vector-controlled induction motor drive is introduced. The vector control of induction motors has been widely accepted in spindle drives of machine tools where they replace conventional DC motors because of the low maintenance requirements. Another important feature of the AC spindle drive is its high-speed capability. The magnetic encoder is most widely used as the speed detector because it is suited for use in an adverse environment. However, the magnetic encoder with high resolution and a high S/N ratio loses the output pulses at extremely high speed. In the drive system introduced, the conventional vector control is used in the low-speed range, and the vector control without the encoder is used in the high-speed range. Close transition between two modes is made without interrupting the operation     

Inhibitory effect of lead on the proliferation of cultured vascular endothelial cells

We investigated the effect of lead nitrate (0.5, 1.0, 2.0 or 5.0 microM) on the proliferation of cultured bovine aortic endothelial cells. After exposure to lead, the number of cells and the incorporation of [3H]thymidine into the acid-insoluble fraction of the cells were reduced in parallel in a concentration-dependent manner. Histologically, lead treatment resulted in a decrease in the cell number accompanied by a change in the cell shape from polygonal to spindle; however, no degenerative change was observed except in 5.0 microM lead-treated cells. Furthermore, stimulation of [3H]thymidine incorporation by either basic or acidic fibroblast growth factor was significantly reduced by lead. However, the leakage of lactate dehydrogenase into the medium from the cells, a marker of nonspecific cell damage, was not changed by lead. From these results, it was revealed that lead inhibits the proliferation of cultured vascular endothelial cells without nonspecific cell damage. Although lead does not destroy the monolayer of endothelial cells, the metal may exhibit its noxious effect in the repair process of the vascular endothelium.     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Experimental study on a quasi-optical mode converter for transforming the whispering-gallery mode into a circularly polarized hollow radiation beam

An experiment was carried out for transforming the 120 GHz-TE_12.2 whispering-gallery mode (WGM) into a circularly polarized hollow radiation beam. A hollow beam was formed by reflecting the WGM, which was radiated from a 16 mm radius circular waveguide cut, with an annular mirror having suitable local normal vectors. The experimentally observed field intensity profiles of the reflected wave were in good agreement with calculated results.     

Interaction of two close quantized vortices in superfluid4He

The three-dimensional dynamics of two interacting quantized vortex filaments is studied. The equations of motion and the method of numerical calculation follow Schwarz. Whether two approaching filaments reconnect or not depends on their arrangement before approach. When a ring moves toward a line from a distance, only within a critical initial distance they can reconnect. The critical distance is minimized when their circulations are parallel at the closest place, while it increases as their circulations begin to deviate from being parallel. Hence the reconnection probability can be less than unity.     

Deposition rate dependence of coercivity in vaccum evaporated CoCr films

Deposition rate dependence of perpendicular coercivity Hcl in Cocr evaporated films at the deposition rate ranging from 0.4nm/s to 400nm/s is studied. Hcl increases with decreasing deposition rate as well as with increasing substrate temperature. A High Hcl over 500 Oe, which has ever been obtained only at a substrate temperature over 250°C when deposition rate is high(400nm/s), is obtained at a substrate temperature of 150°C under deposition rate of 2nm/s. "Shoulder" in the hysteresis loop disappears as Hcl exceeds 400 Oe. Therefore to decrease the deposition rate and to increase the substrate temperature have the same effect on Hcl. Saturation magnetization of the films with the same Cr concentration increases with decreasing deposition rate, and it is suggested that the degree of Cr segregation increases with decreasing deposition rate. Hcl is independent of the background pressure when the relative pressure, the quotient of (background pressure/deposition rate), is between 2×10^-8and 5×10^-6torr/(nm/s). From the results above, it is clarified that the difference of deposition rate between vacuum evaporation and sputtering is one of the major reasons for the difference of Hcl between the two.     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.