Experimental characterization of the stress–strain behaviour of cemented paste backfill in compression

It is of great interest for economical and security reasons to understand the compressive properties of underground cemented paste backfill. In this paper, the stress–strain behaviours of cemented paste backfill (CPB) subjected to uniaxial compression and conventional triaxial tests are presented and discussed. The effect of CPB basic components, strength, ageing and confining pressure on the deformation behaviour of CPB are evaluated and discussed. The results show that the stress–strain behaviour of CPB is strongly influenced by the confinement, the age and strength of CPB, and its components. The increase in confining pressure leads to a change in the mode of failure, in the stiffness, and an increase in the strength.     

Evolution of weak ferroelectricity dielectric response in PbZrO3 antiferroelectric thin films

Journal of Materials Science: Materials in Electronics - In this study, the ferroelectric domain wall contributions to the permittivity is investigated in a PbZrO3 antiferroelectric thin film far...     

Antioxidant activity and acetylcholinesterase inhibition of field and in vitro grown <Emphasis Type="Italic">Musa</Emphasis> L. species

Bananas and plantains (Musa L. species) have medicinal applications against diseases such as hypoglycemia, hypertension, and neurological disorders, especially Alzheimer’s disease. The demand for these plants is growing very fast, resulting in a relatively heavy load on Musaceae genetic resources. The study evaluated and compared the acetylcholinesterase (AChE) inhibition and antioxidant activity of field and in vitro plant materials of nine accessions of Musa spp. consisting of Tropical Musa banana (TMb: TMb 106, TMb 145, TMb 8, TMb 82, TMb 55) and Tropical Musa plantain (TMp: TMp 116, TMp 24, TMp 36) from the International Institute of Tropical Agriculture and Musa sapientum (MS) from the University of Ibadan Botanical garden, Nigeria. Musa accessions were estimated onto Murashige and Skoog (MS) medium supplemented with 0.18 mg/L indole acetic acid (IAA) and 4.5 mg/L benzyl amino purine (BAP). The in vitro grown accessions behaved differently with TMb 8 having the highest average shoot length of 5.03?±?0.66 cm, and average number of leaves of 5.65?±?0.38 cm at the end of 6 weeks. Leaf extracts provide more quantity of phenolics, flavonoids and higher 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity than the fruit extracts. The AChEI activity of the field plants ranged from 60.54?±?0.54 to 98.46?±?0.09?% and in vitro plants from 61.88?±?0.11 to 76.60?±?0.34?% at 200 µg/mL. Crude methanol extract (CME) of the in vitro plants showed higher DPPH antioxidant activity than the field plants with IC₅₀ (extract concentration providing 50?% inhibition) values ranging from 9.57?±?0.24 to 48.37?±?0.62 µg/mL compared with CME of the field samples, which had IC₅₀ ranging from 75.86?±?1.76 to 162.20?±?3.77 µg/mL. Plant tissue culture can be a reliable alternative cultivation method for mass propagation and conservation of Musa species for the production of antioxidant and acetylcholinesterase metabolites.     

Study of boron doping in MPCVD grown homoepitaxial diamond layers based on cathodoluminescence spectroscopy, secondary ion mass spectroscopy and capacitance-voltage measurements

Boron incorporation from the gas phase was achieved in MPCVD grown (100)-oriented homoepitaxial diamond layers, either with or without a small fraction of oxygen in the gas phase, in addition to hydrogen, methane and diborane. From secondary Ion Mass Spectroscopy (SIMS), it is shown that the 0.25% of oxygen decreases the Boron concentration [B] by two orders of magnitude. In this way, we demonstrate that it becomes possible to control [B] with low levels of compensation and passivation down to the 10¹⁵ cm^− 3 range. Cathodoluminescence spectroscopy is systematically performed in seventeen samples under a 10 kV acceleration voltage at 5 K and the exciton bound to boron (BE_TO) intensity to the free exciton (FE_TO) intensity ratio is evaluated (I_BETO/I_FETO). A linear relationship between I_BETO/I_FETO and [B] with a coefficient of 3.5 × 10¹⁶ cm^− 3 is demonstrated for [B] < 3 × 10¹⁷ cm^− 3 in single crystalline diamond, irrespective of the gas phase composition during growth.     

Influence of dry season supplementation for cattle on soil fertility and millet (Pennisetum glaucum L.) yield in a mixed crop/livestock production system of the Sahel

An experiment was conducted in 1996 and 1997 in semi-arid Niger, to determine the influence of supplementation (no supplement, supplemented with millet bran + simple superphosphate + blood meal) of cattle and mulching (0 or 3 t ha⁻¹ of Aristida sieberiana straw) on soil fertility and millet yield. Manure was applied through corralling at a rate of 3 t faecal dry matter (FDM) ha⁻¹ alone or associated to mulching. The residual effects of the treatments were measured on a second millet crop in 1997. Compared to control, the association of mulching and corralling of supplemented as well as non supplemented cattle increased soil pH (KCl) (P < 0.01), Bray1-P (P < 0.05) and NH₄-N (P < 0.05); grain by 136% (P < 0.01) stover yeild by moer than 150% (P < 0.05); and N and P uptake (P < 0.01) during the two cropping seasons. The association of mulching and corralling increased soil NH₄-N (P < 0.01) and soil pH (P < 0.01), compared to the sole corralling. The improvement of soil chemical properties resulted in grain yield increases of 54% (P < 0.01) and stover increases of 42% (P < 0.01). The effect of mulching and corralling association on grain and stover yeilds was higher when cattle were supplemented (67 and 50%) than when they were not supplemented (30 and 26%). The effects of the supplementation on grain and stover yields, and N and P uptake by millet, were restricted, when animals were corralled on bare soil (no mulching). The residual effects of supplementation were minimal. This revised version was published online in November 2006 with corrections to the Cover Date.     

Contribution of Chirality to the Adsorption of a Kr Atom on a Single Wall Carbon Nanotube

Recent theoretical and simulation studies (Lueking et al. Phys Rev B 75:195425, 2007; Kim et al. J Phys Chem 115:7249–7257, 2011) on the adsorption of Kr on suspended nanotubes yielded different commensurate phases at submonolayer coverage than those found in a pioneering experiment (Wang et al. Science 327:552–555, 2010). This controversy between calculations and experiments is yet to be resolved. One of the tentative explanations of the apparent discrepancy is the possibly different chirality as the chirality of the nanotubes used in the experiment is not known. To address the question on chirality, we calculated the adsorption potential of krypton atoms on two sets of single wall carbon nanotubes of same radii with distinct chiralities. We found novel symmetries of the adsorption sites on a nanotube, which systematically vary depending on its chirality with an unexpected, yet intuitive delicacy. The same approach is equally feasible for other gases (Ar, Xe, CH $_{4}$ , etc.). The results of classical grand canonical Monte Carlo simulations confirm the predicted behavior of adsorption phases.     

Parent-offspring relationships in apomictic guayule

The genetic base of guayule (Parthenium argentatum Gray) germ plasm that is available is narrow; yet, significant variability has been described within this germ plasm. This variability is surprising because guayule reproduces by facultative apomixis (asexual reproduction by seed), but evidence suggests that progress through selection is feasible. It has been hypothesized that this variation has arisen through periodic sexual reproduction; however, this has not been quantified. This study was designed to describe and compare eight components of yield and the expression of two isozyme systems in twenty parent plants and half-sib, open-pollinated families from each parent. Extensive variation for all characters was found among both the parents and the progeny, with fresh and dry weights being highly correlated to rubber yield. Parent-offspring regressions were not significantly different from zero. This implies low heritabilities for the major components of yield in guayule, and we believe that family selection, rather than single-plant selection, may generate higher-yielding and more genetically uniform lines at an escalated rate than single-plant selection. Periodic sexuality resulting in genetic variation was estimated by differences in isozyme expression within the half-sib families. Fifteen of the twenty progeny families were polymorphic for either esterase or peroxidase or both isozymes. This amount of sexuality is significant, and guayule must be considered an open-pollinated crop. We conclude from this study that we should rethink our breeding procedures to include controlled pollination and family selection.     

New accelerated charge methods using early destratification applied on flooded lead acid batteries

A traditional charge process for flooded lead acid batteries (FLABs) lasts generally from 8 to 14 h. Nowadays, many applications of FLABs require reduction of the charge duration, for instance, a 4 h-charge for FLABs in grid energy storage or 1 h-charge for FLABs in electric buses. These are called accelerated charge and fast charge. Such reductions of charge time imply the use of a new charge process. One way to reduce the charge duration is to perform an early destratification step without waiting for the end of charge. The new charge method proposed in this paper (early destratification method - ED) focuses on the reduction of the charge time for FLABs using early destratification, which is performed and controlled using charge acceptance measurement during the charge. Laboratory experiments presented here aim first to develop charge acceptance measurements followed by an ED charge method compared to an IUi traditional charge process.     

A GIS-based mapping of historical coastal cliff recession

This paper presents the results of a study on historical cliffs recessions using GIS. In this study, a GIS methodological approach was developed to model and analyse the development and spatial distribution of cliff recession on the coast at Dakar. Valuable information about the coastal erosion and the main causes of the instabilities was obtained. Finally, this research also suggests that important information regarding instability processes can be gathered from existing information sources, such as technical maps, aerial photographs, and written documents, thereby limiting the need for costly and time-consuming field and/or laboratory investigations.     

Time‐ and State‐Dependent Input Delay‐Compensated Bang‐Bang Control of a Screw Extruder for 3D Printing

In this paper, a delay‐compensated bang‐bang control design methodology for the control of the nozzle output flow rate of screw extruder‐based three‐dimensional printing processes is developed. A geometrical decomposition of the screw extruder in a partially and a fully filled regions allows to describe the material convection in the extruder chamber by a one‐dimensional hyperbolic partial differential equation (PDE) coupled with an ordinary differential equation. After solving the hyperbolic PDE by the method of characteristics, the coupled PDE–ordinary differential equation's system is transformed into a nonlinear state‐dependent input delay system. The aforementioned delay system is extended to the non‐isothermal case with the consideration of periodic fluctuations acting on the material's convection speed, which represent the process variabilities due to temperature changes in the extruder chamber, resulting to a nonlinear system with an input delay that simultaneously depends on the state and the time variable. Global exponential stability of the nonlinear delay‐free plant is established under a piecewise exponential feedback controller that is designed. By combining the nominal, piecewise exponential feedback controller with nonlinear predictor feedback, the compensation of the time‐dependent and state‐dependent input delay of the extruder model is achieved. Global asymptotic stability of the closed‐loop system under the bang‐bang predictor feedback control law is established when certain conditions related to the extruder design and the material properties, as well as to the magnitude and frequency of the materials transport speed variations, are satisfied. Simulations results are presented to illustrate the effectiveness of the proposed control design. Copyright © 2017 John Wiley & Sons, Ltd.