Heating performance enhancement of a CO2 heat pump system recovering stack exhaust thermal energy in fuel cell vehicles

A CO₂ heat pump system using recovered heat from the stack coolant was provided for use in fuel cell vehicles, where the high temperature heat source like in internal combustion engine vehicles is not available. The refrigerant loop consists of an electric drive compressor, a cabin heater, an outdoor evaporator, an internal heat exchanger, an expansion valve and an accumulator. The performance characteristics of the heat pump system were investigated and analyzed by experiments. The results of heating experiments were discussed for the purpose of the development and efficiency improvement of a CO₂ heat pump system, when recovering stack exhaust heat in fuel cell vehicles. A heater core using stack coolant was placed upstream of a cabin heater to preheat incoming air to the cabin heater. The performance of the heat pump system with heater core was compared with that of the conventional heating system with heater core and that of the heat pump system without heater core, and the heat pump system with heater core showed the best performance of the selected heating systems. Furthermore, the coolant to air heat pump system with heater core showed a significantly better performance than the air to air heat pump system with heater core.     

Properties and Dispersion of EPDM/Modified‐Organoclay Nanocomposites

Elastomers show improved properties when reinforced with nanoclay at low filler loadings, but dispersion of the clay is difficult in non‐polar polymers, such as ethylene propylene diene monomer (EPDM). In this work several compatibilization approaches were studied, including the addition of EPDM modified with maleic anhydride (EPDM‐g‐MA) and the use of organoclay modified with maleic anhydride‐grafted liquid vinyl polybutadiene (LVPB‐g‐MA). The use of LVPB‐g‐MA‐modified organoclay increased the degree of dispersion as measured by X‐ray diffraction, giving increased thermal stability and modulus, and decreased swelling. Flame resistance was poorer for the EPDM/LVPB‐g‐MA‐modified organoclay system compared to the unmodified EPDM/organoclay compound. The resistivity of the nanoclay‐filled composites was lower than the reference EPDM compound, but dielectric properties for the LVPB‐g‐MA modified organoclay were similar to the reference.

     

Deficiency of co-chaperone immunophilin FKBP52 compromises sperm fertilizing capacity

FKBP52 is a member of the FK506-binding family of immunophilins and serves as a co-chaperone for steroid hormone nuclear receptors to govern appropriate hormone action in target tissues. Male mice missing Fkbp52 are infertile, and this infertility has been ascribed to compromised sensitivity of the anterior prostate, external genitalia, and other accessory sex organs to androgen. Here, we show additional defects contributing to infertility. We found that epididymal Fkbp52(-/-) sperm are sparse often with aberrant morphology, and they have reduced fertilizing capacity. This phenotype, initially observed in null males on a C57BL/6/129 background, is also maintained on a CD1 background. Expression studies show that while FKBP52 and androgen receptor are co-expressed in similar cell types in the epididymis, FKBP52 is also present in epididymal sperm flagella. Collectively, our results suggest that reduced number and abnormal morphology contribute to compromised fertilizing capacity of Fkbp52(-/-) sperm. This study is clinically relevant because unraveling the role of immunophilin signaling in male fertility will help identify new targets for male contraceptives and/or alleviate male infertility.     

Toward understanding the mechanism of nonlinear optical characteristics of PbTe thin film for nano-optical memory

An experimental study is conducted toward understanding the mechanism of nonlinear optical properties of PbTe thin film that were demonstrated potentially usable for nano-optical memory based on super-resolution technology. By way of a real time optical-electrical characterization of a PbTe thin film device, it is found that absorption coefficient decreases with increasing laser power, accompanied by increase in carrier concentration. From z-scan measurements, nonlinear optical coefficient due to a long pulse (1 micros) z-scan is found nearly 3 order of magnitude higher than the one due to a short pulse (30 ps) z-scan when input energy density is relatively comparable. Conceivably, these experimental findings call for a physical model that is able to account for the prevailing role of a thermal contribution within the framework of absorption saturation by band filling. We speculate that the absorption saturation might be enhanced dramatically by making various indirect interband transitions possible via participation of phonons in a photonic excitation process.     

Electrothermal properties of porous ceramic fiber media containing carbon materials

Electrically regenerable porous ceramic fiber media containing nanoporous carbon from 2.5% to 19.2% have been prepared for adsorption/regeneration system. An experimental apparatus was built for in situ measurement of the sample weight during adsorption and electrothermal desorption of gaseous adsorbates. Adsorption and electrothermal desorption behavior of gaseous adsorbates on carbon contained porous ceramic fiber media was explained by physical and electrothermal properties of these materials measured in this work. In situ thermal desorption and adsorption experiments show that a considerable amount of water vapor is adsorbed on the carbon contained media exposed to ambient air.     

Developments in generalised Feistel networks

Nyberg (1996) obtained an upper bound on the maximum average of differential probability for a generalised Feistel network. A counter-example to this result is given     

Stable carbon dioxide reforming of methane over modified Ni/Al2O3 catalysts

CO₂ reforming of methane was studied over modified Ni/Al₂O₃ catalysts. The metal modifiers were Co, Cu, Zr, Mn, Mo, Ti, Ag and Sn. Relative to unmodified Ni/Al₂O₃, catalysts modified with Co, Cu and Zr showed slightly improved activity, while other promoters reduced the activity of CO₂ reforming. Mn-promoted catalyst showed a remarkable reduction in coke deposition, while entailing only a small reduction in catalytic activity compared to unmodified catalyst. The catalysts prepared at high calcination temperatures showed higher activity than those prepared at low calcination temperature. The Mn-promoted catalyst showed very low coke deposition even in the absence of diluent gas and the activity changed only slightly during 100 h operation. This revised version was published online in July 2006 with corrections to the Cover Date.     

A distributed fixed-step power control algorithm with quantizationand active link quality protection

A distributed fixed-step power control algorithm is presented. It is a simple feedback adjustment algorithm using only local information. In the ideal case where there is no power constraint, it is guaranteed that existing users will not be dropped due to admission of new users. If it is infeasible to accommodate all of them, the new user will be blocked. When the constraint on the maximum power is imposed, it is shown by simulation that blocking a new call is more probable than dropping any existing calls, if the capacity is exceeded. Besides, its convergence property is demonstrated. The convergence rate, which depends on the step size, is studied through simulation. In addition, the issue of power quantization is addressed     

A movable safety zone scheme in urban fiber-optic microcellularsystems

We consider an urban fiber-optic microcellular system in which a cigar-shaped cell consists of several microzones with their own antenna sites connected to a central station through optical fibers. To increase the efficiency of radio resources and reduce unnecessary handoffs between microzones, we propose a movable safety zone scheme. A safety zone is a virtually guarded area that does not permit cochannel interference. Outside the safety zone, cochannels can be reused. The safety zone can move under the condition that its user does not meet cochannel interference as he moves to an adjacent microzone. Considering user mobility characteristics in the cigar-shaped cell, we analyze and evaluate the proposed system in terms of intracell and intercell handoff rates, blocking probability, intracell call-dropping probability, and channel reuse parameter. The proposed system can handle a traffic capacity of about 12 Erlangs for seven traffic channels under a call blocking probability of 1% and generates a negligible number of intracell handoffs compared with those of intercell handoffs