Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2 Plasma

The effects of gas flow rate on particle formation and film deposition during the preparation of silica thin film using a TEOS/O₂ plasma were investigated. Particle formation and growth are suppressed with increasing gas flow rates. The film deposition rate increases with increasing gas flow rate, reaches a maximum value, and eventually decreases again. However, the uniformity of the film tends to degrade at high gas flow rates. At a high gas flow rate, some particles trapped in the sheath near the grounded electrode pass through the sheath to reach the substrate and are then embedded in the growing film. A self-consistent sheath model combined with particle force balance based on charge fluctuation was developed to explain these experimental findings qualitatively. The model reveals that charge fluctuation is a key factor for the particle to overcome the potential barrier of the negatively charged particles to pass through the sheath, eventually reaching the substrate. The model further shows that the probability of a particle being deposited on the substrate is higher for increased gas flow rates, which correctly predicts the experimentally observed trend.     

Observations of bound Tween80 surfactant molecules on single-walled carbon nanotubes in an aqueous solution

The slow diffusion of Tween80 surfactant molecules in a single-walled carbon nanotube (SWCNT) aqueous dispersion was directly observed using the pulsed field gradient nuclear magnetic resonance method. The slow diffusion of Tween80 molecules was attributed to the strongly adsorbed molecules on the SWCNTs in the aqueous dispersion. The amount of bound Tween80 molecules was estimated to be approximately 12% of the total amount of Tween80 molecules, contributing to the stability of the SWCNT aqueous dispersion. Using dynamic light scattering and total organic carbon measurements, this SWCNT/Tween80 aqueous dispersion was found to be very stable for at least 3 weeks. The observed zeta potentials of this SWCNT dispersion are between −10 and 0 mV, indicating that the stability of the SWCNTs in the Tween80 solution was maintained by steric interactions between the small amount of adsorbed Tween80 molecules on the SWCNTs, while the effect of electrostatic interactions between adsorbed Tween80 was minimal. This proposed method to investigate the amount of bound Tween80 molecules on SWCNTs has potential benefits in the field of the production of functional materials and nano-toxicity assessments.     

Effect of heat treatment on precipitation behaviour and high temperature strength in a wrought Co-base superalloy

The effects of solution and ageing temperatures on the grain boundary reaction as well as on matrix precipitation in the interior of the grains were investigated using wrought Co-base superalloy HS-21. The grain boundary reaction occurred during furnace-cooling after solution-heating. The phase that precipitated in the grain boundary reactions nodule was M₂₃C₆ carbide. It also occurred during ageing after solution treatment, but the extent of it was considerably influenced by cooling procedure after solution heating. The activation energy of the grain boundary reaction was 244 kJ mol^–1 for the early stage of the grain boundary reaction in HS-21 alloy, and was considered to be the activation energy of grain boundary diffusion of chromium. The extent of the matrix precipitation that occurred during ageing was also influenced by the cooling procedure. Creep rupture tests were carried out at 1088 K in air. An excellent combination of long rupture life and large ductility was attained on a specimen, which involved both the grain boundary reaction nodules (about 7% in area fraction) and the matrix precipitates. The improvement of creep rupture properties results from the retardation of brittle intergranular fracture, which is achieved by grain boundary serration owing to the grain boundary reaction and by the increase of strength in the interior of grain due to the matrix precipitation.     

Structure of effective catalyst layers around bubbles in a fluidized catalyst bed

In a fluidized catalyst bed, the reactant gas transfers from the bubble phase to the emulsion phase and reactions proceed in the emulsion phase. The catalyst particles around the bubbles should contact the gases containing a high concentration of the reactants. Therefore, the effect of the catalysts around the bubbles is very important for estimating the conversion and selectivity in the reactor. In order to study the role of these catalysts, the hydrogenation of carbon dioxide was carried out in a fluidized catalyst bed. Based on the results, the amount of the catalyst that was effective for the reaction was calculated. In addition, the shape of the bubbles ascending in the fluidized catalyst bed was observed using a fast X-ray computer tomography (CT) scanner. The structure of the bubbles in the fluidized catalyst bed was very complicated and the surface area of the bubbles was much greater than the obtained when assuming spherical shaped bubble. By assuming that effective catalysts existed around the bubbles, the thickness of catalyst layer was obtained. Finally, the 3-dimensional images of the catalyst layers around the bubbles were reconstructed.     

Effect of geometry and dielectric material on thermo-mechanical strain on micro-vias in build-up substrates

Build-up substrates have been preferable solutions for small and high performance systems for more than a few decades. Micro-vias need to be smaller to realize ever higher wiring density in build-up substrates, but there has been concern on the reliability. This paper focuses on Cu filled micro-vias of 25 μm in diameter and investigates the strain on micro-vias using a finite element method for varying geometric parameters and material properties. The strain becomes smaller with shrinking micro-vias, and a prediction equation for the strain is developed as a function of the aspect ratio and material properties for both single and stacked micro-vias.     

Feature extraction by supervised independent component analysis based on category information

Independent component analysis (ICA) is a technique of transforming observation signals into their unknown independent components; hence, ICA has often been applied to blind signal separation problems. In this application, it is expected that the obtained independent components extract essential information of independent signal sources from input data in an unsupervised fashion. Based on such characteristics, ICA is currently utilized as a feature extraction method for images and sounds for recognition purposes. However, since ICA is an unsupervised learning, the obtained independent components are not always useful in recognition. To overcome this problem, we propose a supervised approach to ICA using category information. The proposed method is implemented in a conventional three‐layered neural network, but its objective function to be minimized is defined not only for the output layer but also for the hidden layer. The objective function consists of the following two terms: one evaluates the kurtosis of hidden unit outputs and the other evaluates the error between output signals and their teacher signals. The experiments are performed using several standard datasets to evaluate performance of the proposed algorithm. It is confirmed that a higher recognition accuracy is attained by the proposed method as compared with a conventional ICA algorithm. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(2): 25–32, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20522     

Syntactic priming in comprehension: The role of argument order and animacy.

Two visual-world eye-movement experiments investigated the nature of syntactic priming during comprehension--specifically, whether the priming effects in ditransitive prepositional object (PO) and double object (DO) structures (e.g., "The wizard will send the poison to the prince/the prince the poison?") are due to anticipation of structural properties following the verb (send) in the target sentence or to anticipation of animacy properties of the first postverbal noun. Shortly following the target verb onset, listeners looked at the recipient more (relative to the theme) following DO than PO primes, indicating that the structure of the prime affected listeners' eye gazes on the target scene. Crucially, this priming effect was the same irrespective of whether the postverbal nouns in the prime sentences did ("The monarch will send the painting to the president") or did not ("The monarch will send the envoy to the president") differ in animacy, suggesting that PO/DO priming in comprehension occurs because structural properties, rather than animacy features, are being primed when people process the ditransitive target verb. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Selective sorption of heavy metal thiocyanate complexes on crown ether resin

The sorption behavior of heavy metal thiocyanate complexes was investigated for dibenzo-18-crown-6 (DB18C6) resin and bis[2-(o-methoxyphenoxy)ethyl]ether (BMPE) resin. The DB18C6 resin showed a high sorption ability and the degree of zinc sorption increased significantly with thiocyanate concentration. This behavior was not observed for BMPE resin. The sorption behavior was influenced by the countercation species, and the degree of sorption of zinc ions showed the maximum when the potassium thiocyanate was used as a complexing salt. The sorbed species appear to be KZn(SCN)₃, K₂Zn(SCN)₄ in the potassium thiocyanate system, and Zn(SCN)₂ in the lithium thiocyanate system, respectively, according to analysis of the sorption equilibrium. Sodium and ammonium thiocyanate systems show an intermediate behavior of the two. The sorption selectivity for DB18C6 resin depended not only on the hydrophobic nature of heavy metal thiocyanate complexes but also on the stabilization of counter cation species with crown ether matrix, and the sorption selectively was found to be effectively controlled by countercation species according to the cation-chelation mechanism.     

New tetrapolar circuit method using magnetic field for measurementof local impedance change in biological substances

A new tetrapolar circuit method using a magnetic field is proposed to measure the local electric impedance change in living tissue. Based on this method, we designed an apparatus which can detect impedance changes in closely-situated two parts of living tissue, simultaneously and independently. Using this apparatus, we showed the effectiveness of the proposed method by an in vitro experiment and by an in vivo measurement of pulsatile waveforms in the forearm arteries. The detection sensitivity for a local impedance change was confirmed to be higher than that of the conventional tetrapolar method. Pulsatile impedance waveforms measured in the radial and the ulnar parts of the forearm were consistent with those estimated from the anatomical structure.