Note: Zr(IV)-Immobilized Resin Prepared by Surface Template Polymerization for Fluoride Ion Removal

Abstract

A novel adsorbent Zr(IV)-immobilized resin was prepared to remove fluoride ions from tap water and industrial wastewater. In order to enhance both the kinetics and efficiency, large pathways were formed in the resin for fluoride ion adsorption and the Zr(IV)-phosphate complexes were immobilized on the polymer surface by surface-template polymerization. The Zr(IV)-immobilized resin had a fluoride adsorption capacity of 0.30 mmol/g. The morphology of the Zr(IV)-immobilized resin was evaluated by measuring the specific surface area, pore volume, and pore size distribution. The resin possessed large amounts of large macropores with diameters around 300 nm. The molecular structure at the fluoride adsorption sites was investigated by measuring the amounts of phosphorus, zirconium, and fluoride ion in the resin, and developing a model complex using computational chemistry. On the polymer surface, a fluoride ion/Zr(IV)/dioleyl phosphoric acid complex with an ideal F:Zr:P mole ratio of 3:1:3 could be formed.     

Thermal and optical properties of epoxy/zirconia hybrid materials synthesized via in situ polymerization

Epoxy/zirconia hybrid materials were synthesized from a bisphenol-A type epoxy resin, zirconium-tetra-n-propoxide and acetic acid via in situ polymerization. Acetic acid was used to control the hydrolysis and condensation reaction of the zirconium-tetra-n-propoxide. As a result, the zirconia produced by the in situ polymerization was uniformly dispersed into the epoxy matrix on a nano scale or less, and the hybrid materials exhibited an excellent optical transparency. With the increasing zirconia contents, the storage modulus in the rubbery region increased and the peak area of tanδ in the glass transition temperature region decreased. These results indicate that their heat resistance of the hybrid materials could be improved by hybridization with zirconia. Furthermore, the refractive indices of the hybrid materials were significantly improved with the increasing zirconia contents.     

New clustering approach to chip floorplan using functional data

An approach to chip floorplanning utilising hierarchical and functional information derived using LSI logic design is described. The proposed approach adopts a methodological design process similar to that of expert designers. A new clustering method that can be divided into three phases, namely clustering, cluster classification and placement, is employed in this process. The prototype system is implemented based on AI techniques.     

Field evaluation of UHF radio propagation for an ITS safety system in an urban environment

Roadside-to-vehicle and vehicle-to-vehicle communication systems have been proposed as part of ITS development to help achieve vehicle safety and realize more secure road traffic environments. In this article we first introduce several typical applications and their radio range requirements for vehicle safety communication systems to clarify the technical point of view. Then we show some field experiment results in an urban area in Tokyo to investigate and verify the radio propagation characteristics and the quality of communications by using a wireless radio prototype system. Finally, we conclude that the current prototype system has potential to fulfill the radio range requirements of vehicle safety communications, but there are still lots of issues that need to be addressed.     

The effect of salinity on nitrite accumulation in a down‐flow hanging sponge reactor

BACKGROUND: In this study, the inductive effect of salinity on nitrite accumulation in a down‐flow hanging sponge (DHS) reactor, developed as a novel and cost‐effective wastewater treatment process, was evaluated by conducting a long‐term continuous experiment lasting more than 1400 days. RESULTS: The influent salinity was controlled by adding NaCl at concentrations ranging from 0 to 25 g Cl^? L^?1. The effluent nitrite increased with increases in salinity, i.e. the fraction of nitrite to total nitrogen in the effluent increased from 1.6% at 0 g Cl^? L^?1 to 87.6% at 25 g Cl^? L^?1. Fluorescence in situ hybridization (FISH) analysis revealed that as salinity increased, the nitrifying bacterial community in the DHS changed markedly at the species level. In particular, the dominant nitrite‐oxidizing bacteria changed from Nitrospira‐sublineage I at 0 g Cl^? L^?1 to Nitrobacter spp. at 15 g Cl^? L^?1. At 25 g Cl^? L^?1, no nitrite‐oxidizing bacteria were detected. CONCLUSION: Our findings suggest that the DHS reactor is suitable for cost‐effective nitrite production processes and that salinity control using NaCl is an effective method for inducing nitrite accumulation. Copyright © 2012 Society of Chemical Industry     

Effects of winding connections on characteristics of a five‐phase stepping motor

A method for calculating the single‐step response of five‐phase hybrid stepping motors is obtained. The effects of winding connecting methods—(1) star‐bipolar SB, (2) pentagon PD, and (3) new pentagon NP—on the single‐step response are investigated. By application of the above calculation method, the continuous rotating characteristics are studied. It is found that the maximum slewing pulse rate of NP is higher than that of SB and PD connections, and that the variation of the rotor speed at high speed with the SB and PD connections is larger than that with the NP connection. The effects of the current waveform on the oscillation characteristics and relations between the current waveform and the winding connections are investigated. © 2001 Scripta Technica, Electr Eng Jpn, 136(1): 47–56, 2001     

Chemokines and inflammatory diseases

Intoxication after ingestion of toad is rare, but it results in severe morbidity and high mortality. Recently, we encountered 2 children, one a 15-month-old boy and one a 20-month-old girl, who were fed cooked toad (Bufo melanostictus) soup. The boy expired of ventricular fibrillation. The girl presented with varying degrees of A-V block with congestive heart failure which, however, was completely resolved after intensive treatment. In our experience, early identification and intervention are necessary to decrease absorption of toxins; to correct hyperkalemia. Dysrhythmia should be treated with atropine, antiarrhythmic agents, and a temporary pacemaker, in order to avoid lethal results.     

The pharmacokinetics of water-in-oil-in-water-type multiple emulsion of a new tacrolimus formulation

We developed a water-in-oil-in-water (W/O/W)-type multiple emulsion of a new tacrolimus formulation. A potential approach to avoid the complications of systemic immunosuppression and simultaneously enhance immunosuppressive efficacy is to deliver immunosuppressive agents locally to the site of the target organs. The W/O/W emulsion is dispersed oil drops containing smaller water droplets that allow the delivery of drugs preferentially to the reticuloendothelial system (RES). Since the liver and the spleen are primary components of the RES, and the brain and the kidney have a poor RES, we hypothesized that a W/O/W emulsion of tacrolimus would prossess the pharmacokinetic benefits of local immunosuppression. We evaluated this hypothesis in a rat model. The tacrolimus levels of whole blood, the liver, spleen, brain, and kidney in rats given intravenous emulsions of tacrolimus (W/O/W group) were compared with a group administered tacrolimus alone (T group). There were no significant differences between the pharmacokinetic parameters of W/O/W group and T group based on whole blood data. However, the W/O/W group had significantly decreased tacrolimus levels in the brain and kidney, and significantly increased levels in the liver and spleen compared with the T group. These data suggest that the W/O/W emulsion is applicable as an intravenous drug carrier for local immunosuppression.     

Microstructural evolution and mechanical properties of Cr-Ru alloys

In an effort to enhance ductility and strength of Cr-base alloys, a series of Cr-Ru alloys with Ru contents ranging from 3 to 30 at. pct were made to study their microstructure evolution and mechanical properties. The microstructure of the alloys with 6 to 20 at. pct Ru showed signs of a eutectic structure. However, no corresponding eutectic reaction is indicated in the published Cr-Ru phase diagram. The yield strength of the Cr-Ru alloys increased with increasing Ru content at both room temperature and 1200 °C. The tensile ductility of Cr-3 at. pct Ru is about 1.5 pct at room temperature, while the alloys containing 6 at. pct or more Ru showed zero tensile elongation. The deformation mechanisms of the Cr-Ru alloys are discussed in terms of the microstructure and fracture behavior. This article is based on a presentation made in the symposium entitled “Beyond Nickel-Base Superalloys,” which took place March 14–18, 2004, at the TMS Spring meeting in Charlotte, NC, under the auspices of the SMD-Corrosion and Environmental Effects Committee, the SMD-High Temperature Alloys Committee, the SMD-Mechanical Behavior of Materials Committee, and the SMD-Refractory Metals Committee.     

Fundamental characteristics of the QFP measured by the DC SQUID

The fundamental characteristics are described of the quantum flux parametron (QPF), measured by a method in which the output signals of the QFP are detected with a DC SQUID. The DC SQUID linearly and continuously converts the output current of the QFP to voltage, allowing the output signal of the QFP to be measured as the voltage of the DC SQUID. The fundamental characteristics of the QFP have been experimentally confirmed in detail