Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Synthesis,Surface Properties and Effect of an Amino Acid Head Group of 11-(2-Methoxy-4-vinylphenoxy)undecanoicacid-Based Anionic Surfactants

Our present research describes the surface properties of three biobased anionic surfactant synthesized from vinylguaiacol and 11-bromo undecanoic acid. To further improve its hydrophobicity and bioavailability, amino acid head group incorporation was carried out. All these synthesized compounds were thoroughly characterized using NMR and mass spectroscopy. The performance properties such as foaming, wetting, emulsification value and calcium tolerance were evaluated. The studied surfactants possess excellent emulsion stability and moderate calcium tolerance as compared to commercially available surfactant sodium lauryl sulfate (SLS). The micelle formation and the thermodynamics involved at the air–water interface were estimated from surface tension measurements. These surfactants showed a higher tendency towards adsorption at the air–water interface than micellization. Dynamic light scattering and steady state fluorescence anisotropy study were carried out to shed light on the bulk micellization properties of the synthesized surfactant. Along with spherical micelles of <5 nm size, larger aggregates (35–84 nm) were observed with higher anisotropy values. FESEM images further confirmed the larger spherical micelles formed by these surfactants. The surfactants formed chiral aggregates above the critical micelle concentration as indicated by circular dichroism spectra. These surfactants may be suitable candidates for additives to detergents to improve their calcium tolerance especially in the case of hard water. Furthermore, a low foaming ability along with high emulsion stability may find these surfactants to be better replacement of the conventional surfactant used as emulsifiers in many industrial applications.     

Effect of epoxy functionalized compatibilizer on the mechanical properties of low‐density polyethylene/plasticized tapioca starch blends

A series of low‐density polyethylene (LDPE) blends with varying proportions of plasticized tapioca starch have been used for the study of their mechanical properties. A functionalized epoxy resin, namely, poly(ethylene‐co‐glycidyl methacrylate) has been used as the compatibilizer. The impact and tensile properties have been measured by standard ASTM methods. The mechanical properties are seen to improve significantly with the addition of the epoxy compatibilizer, approaching values close to those of virgin LDPE. The scanning electron micrographs of the compatibilized blends show ductile failure which evidently contribute to improved mechanical properties. © 2001 Society of Chemical Industry     

Development of Biodegradable Nanocarriers Loaded with a Monoclonal Antibody

Treatments utilizing monoclonal antibody therapeutics against intracellular protein-protein interactions in cancer cells have been hampered by several factors, including poor intracellular uptake and rapid lysosomal degradation. Our current work examines the feasibility of encapsulating monoclonal antibodies within poly(lactic-co-glycolic acid) (PLGA) nanoparticles using a water/oil/water double emulsion solvent evaporation technique. This method can be used to prepare protective polymeric nanoparticles for transporting functional antibodies to the cytoplasmic compartment of cancer cells. Nanoparticles were formulated and then characterized using a number of physical and biological parameters. The average nanoparticle size ranged from 221 to 252 nm with a low polydispersity index. Encapsulation efficiency of 16%–22% and antibody loading of 0.3%–1.12% were observed. The antibody molecules were released from the nanoparticles in a sustained manner and upon release maintained functionality. Our studies achieved successful formulation of antibody loaded polymeric nanoparticles, thus indicating that a PLGA-based antibody nanoformulation is a promising intracellular delivery vehicle for a large number of new intracellular antibody targets in cancer cells.     

Processing of Piezocomposites by Fused Deposition Technique

Piezoelectric ceramic/polymer composites were made by a fused deposition (FD) technique, which is a solid-freeform fabrication (or layered manufacturing) technique where three-dimensional (3-D) objects are built layer by layer from a computer-aided design (CAD) file on a computer-controlled fixtureless platform. Indirect and direct FD methods were used to fabricate lead zirconate titanate (PZT)/polymer composites. For the indirect method, a CAD file for the negative image of the final part was created. A polymer mold was made via FD using a thermoplastic filament, and composite formation was completed via a lost mold technique. In the direct FD method, a thermoplastic polymeric filament that was filled with 50–55 vol% of PZT powder was used to form a positive image of the desired structure. Three-dimensional honeycomb ("3-D honeycomb") composites and "ladder" composites with 3-3 connectivity, which were formed via the FD technique, showed excellent electromechanical properties for transducer applications. In addition, the FD technique showed the ability to form composites with controlled phase periodicity, various volume fractions, and a variety of microstructures and macrostructures that are not possible with traditional composite-forming techniques.     

Synthesis and characterization of solid-phase super acid catalysts and their application for isomerization of n-alkanes

In the present work, first, the reference catalyst super acidic nanostructured sulfated zirconia (SZ) and super acidic nanostructured aluminum chloride impregnated sulfated zirconium oxides in mole ratios of Zr⁴⁺:Al³⁺ as 2:1 (ACSZ-1), 1:1 (ACSZ-2), and 1:2 (ACSZ-3) were synthesized by a simple precipitation method. The catalytic performance of these four catalysts were evaluated during the isomerization of n-hexane, n-heptane, and n-octane to their corresponding branched chain isomers at low temperature and pressure conditions. ACSZ-2 shows high activity toward isomerization of n-hexane, n-heptane, and n-octane into their corresponding branched chain isomers. The reference catalyst SZ was proved to be less effective compare to the other three synthesized ACSZ catalysts. Ammonia-temperature-programmed desorption of these two materials ensures that the super acidity of ACSZ-2 is higher than that of SZ. Atomic force microscopic and scanning electron microscopic pictures predict the nature of the surface of the catalysts. Transmission electron micrographic analysis indicates the presence of particle-bulks having average size 12–20?nm, presenting an amorphous nature and having no definite surface morphology of ACSZ-2. Fourier transform infrared provides an outline regarding different linkages and bond connectivities between atoms and groups in ACSZ-2 and SZ. After catalyst evaluation and characterization a probable reaction mechanism has been proposed theoretically. The reactivity and selectivity of ACSZ-2 and SZ as well as the order and activation energy of the isomerization reactions in presence of ACSZ-2 have been calculated. The use of ACSZ-2 is beneficial from the point of cost efficiency as well as its use is energy saving.     

Effect of Sol-Gel-Derived Nano-silica on the Properties of Natural Rubber-Poly Butadiene Rubber-Reclaim Rubber Ternary Blends/Silica Nanocomposites

Silica incorporation into natural rubber (NR)-polybutadiene rubber (PBR)-reclaim rubber (RR) ternary blend system was carried out by sol-gel technique at different temperatures. The effect of RR on silica reinforcement was studied for NR-PBR-RR blend systems. The physicochemical properties of sol-gel vulcanizates indicates that the reinforcing efficiency of the nanocomposites increases with increasing RR content. Sol-gel vulcanizates prepared at 50°C shows superior mechanical properties than others. The amount of silica incorporated by sol-gel technique was determined through thermogravimetry analysis, which indicates the increasing trend of thermal stability with silica content. SEM studies indicate the coherency and homogeneity in the NR-PBR-RR/SiO ₂ nanocomposites.     

ARTIFICIAL NEURAL NETWORKS: PRINCIPLE AND APPLICATION TO MODEL BASED CONTROL OF DRYING SYSTEMS - A REVIEW

Abstract

This paper reviews the developments in the model based control of drying systems using Artificial Neural Networks (ANNs). Survey of current research works reveals the growing interest in the application of ANN in modeling and control of non-linear, dynamic and time-variant systems. Over 115 articles published in this area are reviewed. All landmark papers are systematically classified in chronological order, in three distinct categories; namely, conventional feedback controllers, model based controllers using conventional methods and model based controllers using ANN for drying process. The principles of ANN are presented in detail. The problems and issues of the drying system and the features of various ANN models are dealt with upto-date. ANN based controllers lead to smoother controller outputs, which would increase actuator life. The paper concludes with suggestions for improving the existing modeling techniques as applied to predicting the performance characteristics of dryers. The hybridization techniques, namely, neural with fuzzy logic and genetic algorithms, presented, provide, directions for pursuing further research for the implementation of appropriate control strategies. The authors opine that the information presented here would be highly beneficial for pursuing research in modeling and control of drying process using ANN     

Thermal and X-Ray Diffraction Studies on Interpenetrating Polymer Networks of Soybean Oil-Based Polyurethane and Cardanol-Based Dye

The mixed ester polyol (MEP) is obtained from refined soybean oil on treatment with glycerol at 210°C in presence of lithrage. The probable structure of MEP was established by IR spectra. The polyurethane synthesized from MEP and diphenyl methane diisocyanate (DPMDI) with varying NCO:OH ratios were reacted with cardanol-o-aminophenol dye using ethyleneglycol dimethacrylate (EGDM) as a cross-linking agent and benzoyl peroxide as initiator. The PU was thoroughly characterized by IR spectroscopy. The thermal behavior of the Interpenetrating polymer networks was characterized by TG and the Morphology was studied by XRD studies.     

Impacts of conservation agriculture on soil aggregation and aggregate-associated N under an irrigated agroecosystem of the Indo-Gangetic Plains

We evaluated impacts of conservation agriculture (zero tillage, bed planting and residue retention) on changes in total soil N (TSN) and aggregate-associated N storage in a sandy loam soil of the Indo-Gangetic Plains. Cotton (Gossypium hirsutum) and wheat (Triticum aestivum) crops were grown during the first 3 years (2008–2011) and in the last year, maize (Zea mays) and wheat were cultivated. Results indicate that after 4 years the plots under zero tillage with bed planting (ZT-B) and zero tillage with flat planting (ZT-F) had 15 % higher TSN concentrations than conventional tillage and bed planting plots (CT-B) (0.63 g kg^?1 soil) in the 0–5 cm soil layer. CT-B plots had lower soil bulk density that ZT plots in that layer. Plots under ZT-B (0.57 Mg ha^?1) contained 20 % higher TSN stock in the 0–5 cm soil layer than CT-B plots (0.48 Mg ha^?1). However, tillage had no impact on TSN concentration or stock in the sub-surface (5–15 and 15–30 cm) soil layers. Thus, in the 0–30 cm soil layer, ZT-B plots contained 6 and 5 % higher (P > 0.05) TSN stock compared with CT-B (2.15 Mg N ha^?1) and CT-F (2.19 Mg N ha^?1) plots respectively after 4 years. Plots that received cotton/maize + wheat residue (C/M + W RES) contained 16 % higher TSN concentration than plots with residues removed (N RES; 0.62 g kg^?1 soil) in the surface (0–5 cm) layer. Plots with only cotton/maize residue (C/M RES) or only wheat residue (W RES) retention/incorporation had similar TSN concentrations and stocks in the subsurface layer. Plots under ZT-B also had more macroaggregates (0.25–8 mm) and greater mean weight diameter with lower silt + clay sized particles than CT-B plots in that layer. A greater proportion of large macroaggregates (2–8 mm) in the plots under C/M + W RES compared with N RES were observed. In the 5–15 cm soil layer ZT-B and C/M + W RES treated plots had more macroaggregates and greater mean weight diameter than CT-B and N RES treated plots, respectively. Because of the greater amount of large aggregates, plots under ZT-B and C/M + W RES had 49 and 35 % higher large macroaggregate-associated N stocks than CT-B (38 kg TSN ha^?1) and N RES (40 kg TSN ha^?1) plots, respectively, in the 0–5 cm soil layer, although aggregates had similar TSN concentrations in all plots. Both tillage and residue retention had greater effects on aggregate-associated N stocks in the 5–15 cm layers. In addition to N content within large macroaggregates, small macroaggregate-associated N contents were also positively affected by ZT-B and C/M + W RES. Tillage and residue retention interaction effects were not significant for all parameters. Thus, the adoption of ZT in permanent beds with crop residue addition is a better management option for improvement of soil N (and thus possibly a reduced dose of fertilizer N can be adopted in the long run), as the management practice has the potential to improve soil aggregation with greater accumulation of TSN within macroaggregates, and this trend would likely have additive effects with advancing years of the same management practices in this region.