An efficient and intelligent routing strategy for vehicular delay tolerant networks

The vehicular delay-tolerant network is the real-life application based area of Delay tolerant network where communication takes place using vehicular nodes and roadside units. The topology used in vehicular networks is highly dynamic by architecture due to the use of moving vehicular nodes. It operates in such a scenario where a direct path between source and destination remains absent on the most piece of the time. In case of non-existence of connected path vehicular delay-tolerant network works opportunistically and uses the same store, carry, and forward paradigm as Delay Tolerant Network. However, the routing protocols designed for vehicular delay-tolerant network faces crucial challenges like inadequate relay node, incomplete data transfer, a large number of packet drop, and uncertain delivery time. In this research paper, we propose a novel routing strategy for the vehicular delay-tolerant network. The proposed routing strategy selects efficient vehicular relay node for complete packet transfer and intelligently reduces the packet drop for timely packet delivery. We implement the proposed routing strategy in the ONE simulator; the ONE simulator provides an opportunistic environment for nodes. We analyze the performance of the proposed strategy under various simulations results using different parameters. The results show that the proposed strategy outperforms standard routing protocols in terms of considered parameters and provide an efficient solution for the problem of disconnection.

     

Enhancing the isolation between the strips of dipoles antenna at terahertz frequency with cuboid-shaped graphene layer

Wireless Networks - In this paper, the concept of mantle cloaking method uses to enhance the isolation between the two electrically close dipole antenna at low-terahertz (THz) frequencies, two...     

Ultralow-k silicon containing fluorocarbon films prepared by plasma-enhanced chemical vapor deposition

Low dielectric constant materials as interlayer dielectrics (ILDs) offer a way to reduce the RC time delay in high-performance ultra-large-scale integration (ULSI) circuits. Fluorocarbon films containing silicon have been developed for interlayer applications below 50-nm linewidth technology. The preparation of the films was carried out by plasma-enhanced chemical vapor deposition (PECVD) using gas precursors of tetrafluorocarbon as the source of active species and disilane (5 vol.% in helium) as a reducing agent to control the ratio of F/C in the films. The basic properties of the low dielectric constant (low-k) interlayer dielectric films are studied as a function of the fabrication process parameters. The electrical, mechanical, chemical, and thermal properties were evaluated including dielectric constant, surface planarity, hardness, residual stress, chemical bond structure, and shrinkage upon heat treatments. The deposition process conditions were optimized for film thermal stability while maintaining a relative dielectric value as low as 2.0. The average breakdown field strength was 4.74 MV/cm. The optical energy gap was in the range 2.2–2.4 eV. The hardness and residual stress in the optimized processed SiCF films were, respectively, measured to be in the range 1.4–1.78 GPa and in the range 11.6–23.2 MPa of compressive stress.     

Making Large‐Area Titanium Disulfide Films at Reduced Temperature by Balancing the Kinetics of Sulfurization and Roughening

The synthesis of large‐area TiS₂ thin films is reported at temperatures as low as 500 °C using a scalable two‐step method of metal film deposition followed by sulfurization in an H₂S gas furnace. It is demonstrated that the lowest‐achievable sulfurization temperature depends strongly on the oxygen background during sulfurization. This dependence arises because Ti? O bonds present a substantial kinetic and thermodynamic barrier to TiS₂ formation. Lowering the sulfurization temperature is important to make smooth films, and to enable integration of TiS₂ and related transition metal dichalcogenides—including metastable phases and alloys—into device technology.     

Optical backbone and control of attocell network

Photonic Network Communications - For serving futuristic applications like distributed robotic systems with robots equipped with humanoid intelligence, wireless access to high-performance computing...     

Intercycle switching (ICS)-based dynamic reconfiguration of p-cycle for dual-failure survivability of WDM networks

Today, the most promising technique used for the survivability of optical transport networks is p-cycle. However, it provides longer restoration path at failure state of the network. The intercycle switching (ICS) is one of the recent approaches that is based on idle p-cycles and is used for shortening the length of restoration path in single-fault model. Utilization of idle p-cycles degrades the inherent dual-failure restorability of single-failure design model of p-cycle, whereas ICS releases the maximum portion of conventional restoration path by utilizing a small segment of the idle p-cycle. Here, the authors proposed a new approach to reconfiguring the released portion of restoration path and unused segment of corresponding idle p-cycle as new cycle(s). In respect of idle p-cycles, the new reconfigured cycle(s) provides more dual-failure restorability in single-failure design of p-cycle. Therefore, the proposed approach mitigates the above-said drawback of ICS and minimizes additional spare capacity requirement for dual-failure survivability.     

EHCR-FCM: Energy Efficient Hierarchical Clustering and Routing using Fuzzy C-Means for Wireless Sensor Networks

Wireless Sensor Network (WSN) is a part of Internet of Things (IoT), and has been used for sensing and collecting the important information from the surrounding environment. Energy consumption in this process is the most important issue, which primarily depends on the clustering technique and packet routing strategy. In this paper, we propose an Energy efficient Hierarchical Clustering and Routing using Fuzzy C-Means (EHCR-FCM) which works on three-layer structure, and depends upon the centroid of the clusters and grids, relative Euclidean distances and residual energy of the nodes. This technique is useful for the optimal usage of energy by employing grid and cluster formation in a dynamic manner and energy-efficient routing. The fitness value of the nodes have been used in this proposed work to decide that whether it may work as the Grid Head (GH) or Cluster Head (CH). The packet routing strategy of all the GHs depend upon the relative Euclidean distances among them, and also on their residual energy. In addition to this, we have also performed the energy consumption analysis, and found that our proposed approach is more energy efficient, better in terms of the number of cluster formation, network lifetime, and it also provides better coverage.

     

Uniform thresholding based transmission policy for energy harvesting wireless sensor nodes in fading channel

The work presents a novel computationally efficient transmission policy for throughput maximization over point-to-point sensor links employing harvest-use-store protocol with finite storage capacity battery. In these settings, under finite averaging duration constraint, the stochastic dynamic programming (SDP) technique provides the optimal solution for throughput maximization, but the implementation complexity for SDP is prohibitively large. Thus, there is a need to explore new solutions that can provide near-optimal throughput with lower implementation complexity. The work in this paper presents a adaptive transmission policy based on uniform thresholding that achieves a near-optimal throughput obtainable by SDP. Quantitative comparison with optimal online policies shows that the proposed policy attains performance close to SDP with lower implementation complexity.

     

A Markov Decision Process based flow assignment framework for heterogeneous network access

We consider a scenario where devices with multiple networking capabilities access networks with heterogeneous characteristics. In such a setting, we address the problem of efficient utilization of multiple access networks by devices via optimal assignment of traffic flows with given utilities to different networks. We develop and analyze a device middleware functionality that monitors network characteristics and employs a Markov Decision Process (MDP) based control scheme that in conjunction with stochastic characterization of the available bit rate and delay of the networks generates an optimal policy for allocation of flows to different networks. The optimal policy maximizes, under available bit rate and delay constraints on the access networks, a discounted reward which is a function of the flow utilities. The flow assignment policy is periodically updated and is consulted by the flows to dynamically perform network selection during their lifetimes. We perform measurement tests to collect traces of available bit rate and delay characteristics on Ethernet and WLAN networks on a work day in a corporate work environment. We implement our flow assignment framework in ns-2 and simulate the system performance for a set of elastic video-like flows using the collected traces. We demonstrate that the MDP based flow assignment policy leads to significant enhancement in the QoS provisioning (higher rate allocation, lower packet delays and packet loss rates) for the flows and better access network utilization, as compared to policies that allocate flows to different networks using greedy approaches or heuristics like average available bit rate on the networks.     

The effect of surface recombination on the frequency-dependentcharacteristics of an ion-implanted GaAs OPFET

The effect of modulation frequency and surface recombination on the characteristics of an ion-implanted GaAs OPFET is determined analytically. The drain-source current is found to decrease with the increase in both modulation frequency and trap center density. The current changes significantly with the trap center density only when the latter is greater than 10²⁰/m². The threshold voltage does not change appreciably with the modulation frequency as in a silicon OPFET. However, the increased in the trap center density causes V_T to increase in the enhancement device and decrease in the depletion device. Further, V_T increases under the normally ON condition and decreases under the normally OFF condition with an increase in the photon absorption coefficient in GaAs. Some anomalous behavior is observed for higher values of the absorption coefficient