Characterization of a water-based paint for corrosion protection

Corrosion of steel rebars in reinforced concrete is one of the major problems in the construction industry. Carbonation reactions of concrete with carbon dioxide and, mainly, the chloride salts action are the main causes responsible for concrete degradation. Protective coatings help to improve the durability of concrete structures by acting as a physical barrier against the corrosion agents. Waterborne paints are usually used for concrete protection rather than solvent-based paints since they are less pollutant. The aim of this work is to investigate the influence of the pore size and porosity on the permeability of the paints films toward sodium chloride. Three characterization methods from membrane science were implemented to characterize paint coatings. The time-lag method was used to determine the permeability toward the sodium chloride and toward helium and argon, these for approximately 100% relative humidity. From the seven waterborne paints formulated, only one was found to be suitable for surface protection of reinforced concrete, since its permeability toward NaCl was smaller than 10⁻¹⁴ m² s⁻¹, the threshold value required by National Laboratory of Civil Engineering (LNEC) in Portugal. For the formulated paints, it was observed that the average pore size correlates well with the permeability toward sodium chloride. This is an important result since obtaining the permeability toward sodium chloride of corrosion protective paints is very time consuming, while the average pore size can be obtained in a much shorter time.     

Chitosan Microspheres as Carriers for pH‐Indicating Species in Corrosion Sensing

Chitosan microspheres containing bromocresol green, cresol red, and phenolphthalein for corrosion detection, through pH change, are synthesized in order to be used in protective coatings for aluminium alloys. Microspheres containing corrosion detection species are characterized morphologically (SEM) and physico‐chemically (FTIR, TGA). Release studies (UV–vis) are performed in corrosion‐promoting conditions (pH, NaCl), and detection studies by immersion in media associated with corrosion activity while microspheres' sensing activity is evaluated visually. Electrochemical characterization of AA2024 substrates in the presence of chitosan spheres is performed to understand material performance, and a color change is observed as a result of local pH increase in cathodic areas when corrosion takes place. These findings can be correlated with the results from release studies and seem a promising approach for corrosion sensing purposes, not only because pH increase is possible to detect due to corrosion, but also because chitosan is considered an environmentally friendly material.     

Gauging food and nutritional care quality in hospitals

ABSTRACT: BACKGROUND: Food and nutritional care quality must be assessed and scored, so as to improve health institution efficacy. This study aimed to detect and compare actions related to food and nutritional care quality in public and private hospitals. METHODS: Investigation of the Hospital Food and Nutrition Service (HFNS) of 37 hospitals by means of structured interviews assessing two quality control corpora, namely nutritional care quality (NCQ) and hospital food service quality (FSQ). HFNS was also evaluated with respect to human resources per hospital bed and per produced meal. RESULTS: Comparison between public and private institutions revealed that there was a statistically significant difference between the number of hospital beds per HFNS staff member (p = 0.02) and per dietitian (p < 0.01). The mean compliance with NCQ criteria in public and private institutions was 51.8% and 41.6%, respectively. The percentage of public and private health institutions in conformity with FSQ criteria was 42.4% and 49.1%, respectively. Most of the actions comprising each corpus, NCQ and FSQ, varied considerably between the two types of institution. NCQ was positively influenced by hospital type (general) and presence of a clinical dietitian. FSQ was affected by institution size: large and medium-sized hospitals were significantly better than small ones. CONCLUSIONS: Food and nutritional care in hospital is still incipient, and actions concerning both nutritional care and food service take place on an irregular basis. It is clear that the design of food and nutritional care in hospital indicators is mandatory, and that guidelines for the development of actions as well as qualification and assessment of nutritional care are urgent.     

Distributed Control Strategy with Smith's Predictor in a Pilot-Scale Diabatic Distillation Unit

Intrinsic characteristics of distillation such as dead time and high nonlinearities do not allow the complete elimination of transient times when any external disturbance or set-point change occurs. Thus, aiming at the use of easy-tuning systems, a distributed-action control in trays of a diabatic distillation unit with Smith's predictor was implemented in the Simulink environment to further reduce transient times and out-of-specification product. The distributed-action strategy with Smith's predictor led to a reduction of 33.3 min (33 %) in the transient time of the top temperature control loop and 66 % in out-of-specification product, when compared with the conventional strategy, and thus is shown to be an efficient approach to increasing the productivity of distillation plants.     

Visceral Obesity and Its Shared Role in Cancer and Cardiovascular Disease: A Scoping Review of the Pathophysiology and Pharmacological Treatments

The association between obesity, cancer and cardiovascular disease (CVD) has been demonstrated in animal and epidemiological studies. However, the specific role of visceral obesity on cancer and CVD remains unclear. Visceral adipose tissue (VAT) is a complex and metabolically active tissue, that can produce different adipokines and hormones, responsible for endocrine-metabolic comorbidities. This review explores the potential mechanisms related to VAT that may also be involved in cancer and CVD. In addition, we discuss the shared pharmacological treatments which may reduce the risk of both diseases. This review highlights that chronic inflammation, molecular aspects, metabolic syndrome, secretion of hormones and adiponectin associated to VAT may have synergistic effects and should be further studied in relation to cancer and CVD. Reductions in abdominal and visceral adiposity improve insulin sensitivity, lipid profile and cytokines, which consequently reduce the risk of CVD and some cancers. Several medications have shown to reduce visceral and/or subcutaneous fat. Further research is needed to investigate the pathophysiological mechanisms by which visceral obesity may cause both cancer and CVD. The role of visceral fat in cancer and CVD is an important area to advance. Public health policies to increase public awareness about VAT’s role and ways to manage or prevent it are needed.     

Glass foam of high compressive strength produced from photovoltaic module waste glass,eggshell, and clay

A glass foam (GF) of high specific compressive strength (12.17±1.91 MPa g⁻¹ cm⁻³) and low thermal conductivity (.121±.001 Wm⁻¹ K⁻¹) was produced from waste glass of photovoltaic module, eggshells, and bentonite clay. The influences of the amount of clay and heat-treatment temperature on the GFs final properties were assessed. X-ray diffraction results and the data of microscopic analyses demonstrated that addition of clay affected the structure and porosity of the GFs, and consequently their mechanical properties. On the basis of the mechanical property (density), the GF that composed of 80% waste glass, 10% clay, and 10% eggshell at the sintering temperature of 900°C was the best. The GFs reported in this study could serve as promising insulators in situations where high load support is required.     

Blends containing amphiphilic polymers IV. Poly(N‐1‐alkyl itaconamic acids) with poly(2‐vinylpyridine) and poly(4‐vinylphenol)

The phase behavior of blends containing Poly(N‐1‐alkyl itaconamic acids) (PNAIA) with Poly(2‐vinylpyrindine) (P2VPy) and Poly(4‐vinylphenol) (P4VPh) were analyzed by Diferential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR). Miscibility over the whole range of compositions is observed in both systems. All the blends show thermograms exhibiting distinct single glass transition temperatures (T_g), which are intermediate to those of the pure components. The Calorimetric Analysis using Gordon Taylor, Couchman, and Kwei treatments allows conclusion that interactions between the components is favorable to the miscibility. FTIR analysis of the blends suggests that the driving force for miscibility is hydrogen bonding formation. The variation of the absorptions of the carbonyl groups of PNAIA and the hydroxyl groups of P4VPh allows one to attribute the miscibility to weak acid base like interactions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1245–1250, 2002; DOI 10.1002/app.10453     

Evolution of Chemistry,Morphology and Rheology of Various Polymer Systems along a Twin‐Screw Extruder

Intermeshing twin‐screw extruders have been recently identified as useful in special application niches such as the extrusion of PVC dry blends (counter‐rotating machines) and compounding operations (co‐rotating machines). Thus, it is of interest to study the mechanical and/or chemical effects that occur along the screw axis of the extruders, since they will dictate the characteristics and performance of the final material. This work aims at illustrating the usefulness of a simple experimental tool recently developed for the study of the physical, chemical and morphological evolution along the extruder of polymer based systems, data being presented and discussed for a number of composites and blends.     

Influence of ethylene‐co‐vinyl acetate copolymers on the flow properties of wax synthetic systems

Wax crystallization can cause serious damage to petroleum flow because as the viscosity increases, there is organic deposition in the pipe lines, which causes oil production reduction. Ethylene–vinyl acetate copolymers (EVA) are used as an alternative to prevent such problems. The influence of EVA copolymers on the properties of wax synthetic systems, composed of a solvent mixture and paraffin and petroleum asphalt residue (PAR), was evaluated in this work. The performance of EVA as a wax inhibitor depends on the molecular weight and vinyl acetate content of the copolymer and on the presence of the asphalt fraction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1337–1348, 2002     

Phospholipids inTrypanosoma cruzi: Phosphoinositide composition and turnover

The polyphosphoinositides fromTrypanosoma cruzi were isolated by preparative thin-layer chromatography (TLC) and identified. When myo-[³H]inositol was present in the culture medium for five days, analyses showed the presence of phosphatidylinositol (PI), lysophosphatidylinositol (lysoPI), phosphatidylinositol 4-phosphate (PIP) and phosphatidylinositol 4,5-bisphosphate (PIP₂). Short-term incubation with³²P_i led to higher percentages of incorporation into phosphatidylethanolamine (PE), lysophosphatidylethanolamine (lysoPE) and PI compared to the other glycerophospholipids. The phosphoinositides (PI, PIP and PIP₂) contained a larger proportion of unsaturated than saturated fatty acids. High proportions of 18∶2 were found in the three phosphoinositides analyzed, whereas the major saturated fatty acid was 18∶0. Watersoluble inositol phosphates (IP, IP₂ and IP₃) were also identified.