A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Sigma phase morphologies in cast and aged super duplex stainless steel

Solution annealed and water quenched duplex and super duplex stainless steels are thermodynamically metastable systems at room temperature.These systems do not migrate spontaneously to a thermodynamically stable condition because an energy barrier separates the metastable and stable states. However, any heat input they receive, for example through isothermal treatment or through prolonged exposure to a voltaic arc in the welding process, cause them to reach a condition of stable equilibrium which, for super duplex stainless steels, means precipitation of intermetallic and carbide phases. These phases include the sigma phase, which is easily identified from its morphology, and its influence on the material's impact strength.The purpose of this work was to ascertain how 2-hour isothermal heat treatments at 920 °C and 980 °C affect the microstructure of ASTM A890/A890M GR 6A super duplex stainless steel. The sigma phase morphologies were found to be influenced by these two aging temperatures, with the material showing a predominantly lacy microstructure when heat treated at 920 °C and block-shaped when heat treated at 980 °C.     

Effect of phosphate binders on oxidative stress and inflammation markers in hemodialysis patients

It has been suggested that phosphate binders may reduce the inflammatory state of hemodialysis (HD) patients. However, it is not clear whether it has any effect on oxidative stress. The objective of this study was to evaluate the effect of sevelamer hydrochloride (SH) and calcium acetate (CA) on oxidative stress and inflammation markers in HD patients. Hemodialysis patients were randomly assigned to therapy with SH (n=17) or CA (n=14) for 1 year. Before the initiation of therapy (baseline) and at 12 months, we measured in vitro reactive oxygen species (ROS) production by stimulated and unstimulated polymorphonuclear neutrophils and serum levels of tumor necrosis factor α, interleukin-10, C-reactive protein, and albumin. There was a significant reduction of spontaneous ROS production in both groups after 12 months of therapy. There was a significant decrease of Staphylococcus aureus stimulated ROS production in the SH group. There was a significant increase in albumin serum levels only in the SH group. In the SH group, there was also a decrease in the serum levels of tumor necrosis factor α and C-reactive protein. Our results suggest that compared with CA treatment, SH may lead to a reduction in oxidative stress and inflammation. Therefore, it is possible that phosphate binders exert pleiotropic effects on oxidative stress and inflammation, which could contribute toward decreasing endothelial injury in patients in HD.     

Robust ℋ︁∞ filtering for uncertain Markovian jump linear systems

This paper investigates the problem of ??_∞ filtering for a class of uncertain Markovian jump linear systems. The uncertainty is assumed to be norm‐bounded and appears in all the matrices of the system state‐space model, including the coefficient matrices of the noise signals. It is also assumed that the jumping parameter is available. We develop a methodology for designing a Markovian jump linear filter that ensures a prescribed bound on the ??₂‐induced gain from the noise signals to the estimation error, irrespective of the uncertainty. The proposed design is given in terms of linear matrix inequalities. Copyright © 2002 John Wiley & Sons, Ltd.     

Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

Immunohistochemical quantitation for extracellular matrix proteins in rats with glomerulonephritis induced by monoclonal anti-Thy-1.1 antibody

During clot retraction, platelets interact with fibrin resulting in marked reduction of clot volume. Altered fibrin structure has been reported to affect clot retraction as measured by serum expression. This study was performed to test whether such altered retraction was the result of increased resistance to network collapse or due to decreased force development by platelets. Altered fibrin structure was documented as variation of fibre mass/length ratios (mu) and shifts in clot elastic modulus. The force developed by platelets during clotting was measured directly. Increasing the fibrinogen concentration led to thinner fibre formation (decreased mu), and a linear increase in gel elastic modulus. Over a fibrinogen concentration range of 100 to 400 mg/dl, force development was minimally affected. Force development and clot elastic modulus increased in a linear fashion with increasing platelet concentration. Increasing the calcium concentration from 5 to 20 mM caused a 160% increase in fibrin fibre size (mu), and a 52% decline in clot modulus. Force developed at 1200 s declined by 17%. At 15 mg/ml, dextran and hydroxyethyl starch (HES) also increased mu, and decreased clot modulus; however, both agents markedly reduced force development. Increasing ionic strength or the addition of IgG decreased mu and increased gel elastic modulus. Force development increased modestly with increased ionic strength, did not change with addition of IgG in saline and declined with addition of IgG in maltose. This study indicates that force development is primarily dependent on platelet function while clot modulus depends on both fibrin structure and platelet function.(ABSTRACT TRUNCATED AT 250 WORDS)     

Studies on dry spinning. I. Fundamental equations

One difficulty in analyzing the state of filament in the dry spinning process is that in the boundary conditions required to solve the equations of mass, momentum and energy which are derived on the consideration of balance with respect to infinitesimally small element are not given a priori. The equations which include these boundary conditions in themselves are derived by considering mass, momentum, and energy balances with respect to the entire cross section of filament. These additional macroscopic equations are simplified to a great extent by assuming the flat velocity profile through the cross section of filament. Besides, in the steady state, these macroscopic equations are modified to give the equations of average solvent content, spinning tension, cross-sectional area, and average temperature. When the spinning conditions are given and the physical constants are measured for a given polymer and solvent system, it becomes possible to calculate the state of filament by solving these microscopic and macroscopic equations simultaneously without resorting to actual spinning.     

Thermal resistance in Speer carbon resistors below 1 K

Temperature dependences of Speer carbon resistors between 30 mK and 4.2 K have been measured. The applied electric power at which the resistance decreases by 1% was measured accurately over the same temperature range. From these data, discussions of the thermal resistance of the resistors are made in detail. Some techniques to measure carbon resistance below 1 K, including the method to remove heat leaks, are described.