An investigation of the consequences of primary dust explosions in interconnected vessels

In this article Eulerian-Lagrangian 2D computer simulations of consequences of primary dust explosions in two vessels connected by a duct are described. After an explosion in the primary vessel a propagation of hot pressurised gases to the secondary vessel, initially uniformly filled with dust particles, is simulated. The gas phase is described by the standard equations and it is coupled with the particulate phase through the drag force and the convective heat transfer. No chemical reaction is considered in the model since the objective was to model the system up to the time of ignition. The computation was performed for different lengths and diameters (heights) of the linking duct. Having analysed the results, it was concluded that the simulations agree with experimental observations in that the probability of transmission of an explosion from the primary to the secondary vessel decreases with decreasing diameter (height) and increasing length of the connecting pipeline. Snapshots of particle positions for different times are presented. The work illustrates the behaviour of the mixture in the secondary vessel: the particles tend to concentrate in clouds, and domains with no particles are observed. This may influence the explosion characteristics of the system.     

Coulometric sodium chloride removal system with Nafion membrane for seawater sample treatment

Seawater analysis is one of the most challenging in the field of environmental monitoring, mainly due to disparate concentration levels between the analyte and the salt matrix causing interferences in a variety of analytical techniques. We propose here a miniature electrochemical sample pretreatment system for a rapid removal of NaCl utilizing the coaxial arrangement of an electrode and a tubular Nafion membrane. Upon electrolysis, chloride is deposited at the Ag electrode as AgCl and the sodium counterions are transported across the membrane. This cell was found to work efficiently at potentials higher than 400 mV in both stationary and flow injection mode. Substantial residual currents observed during electrolysis were found to be a result of NaCl back diffusion from the outer side of the membrane due to insufficient permselectivity of the Nafion membrane. It was demonstrated that the residual current can be significantly reduced by adjusting the concentration of the outer solution. On the basis of ion chromatography results, it was found that the designed cell used in flow injection electrolysis mode reduced the NaCl concentration from 0.6 M to 3 mM. This attempt is very important in view of nutrient analysis in seawater where NaCl is a major interfering agent. We demonstrate that the pretreatment of artificial seawater samples does not reduce the content of nitrite or nitrate ions upon electrolysis. A simple diffusion/extraction steady state model is proposed for the optimization of the electrolysis cell characteristics.     

Direct optical carbon dioxide sensing based on a polymeric film doped with a selective molecular tweezer-type ionophore

A novel optical method for the determination of CO(2) concentration in aqueous and gaseous samples of plasticized PVC film is presented. The detection principle makes use of a direct molecular recognition of the carbonate ion by a molecular tweezer-type ionophore, which has previously been demonstrated to exhibit excellent carbonate selectivity. The carbonate ion is extracted together with hydrogen ions into a polymeric film that contains the anion exchanger tridodecylmethylammonium chloride, a lipophilic, electrically charged, and highly basic pH indicator, which is used for the readout in absorbance mode, in addition to the lipophilic carbonate ionophore. According to known bulk optode principles, such an optical sensor responds to the product of the carbonate ion activity and the square of hydrogen ion activity. This quantity is thermodynamically linked to the activity of carbon dioxide. This allows one to realize a direct carbon dioxide sensor that does not make use of the traditional Severinghaus sensing principle of measuring a pH change upon CO(2) equilibration across a membrane. A selectivity analysis shows that common ions such as chloride are sufficiently suppressed for direct PCO(2) measurements in freshwater samples at pH 8. Chloride interference, however, is too severe for direct seawater measurements at the same pH. This may be overcome by placing a gas-permeable membrane over the optode sensing film. This is conceptually confirmed by establishing that the sensor is equally useful for gas-phase PCO(2) measurements. As expected, humid air samples are required for proper sensor functioning, as dry CO(2) gas will not cause any signal change. The sensor showed acceptable response times and good reproducibility under both conditions.     

Thermal and mechanical behaviour of flexible polyurethane foams modified with graphite and phosphorous fillers

Flexible polyurethane foams (FPF) are polymer materials that have high flammability. Fyrol PNX (FPNX) and expandable graphite (EG), have been used to modify the properties of these materials. The aim of this study was to assess the possibility of improving the thermal stability and flame retardancy of FPF by the addition of FPNX and EG fillers. The prepared foams were characterised by their apparent density, hardness, flexibility, irreversible strain and linear flammability, as well as thermogravimetric analysis (TGA), dynamic mechanical analysis, Fourier transform infrared spectroscopy (FT-IR) and pyrolysis combustion flow calorimetry (PCFC) measurements. The apparent density, hardness, flexibility and irreversible strain results showed that the addition of graphite and phosphorous fillers to the FPF makes slight changes to the mechanical properties, which remain within the acceptable norms. It was also observed that reducing the amount of Fyrol PNX and replacing it with the same amount of EG allowed similar values of linear flammability to be obtained with a simultaneous increase in thermal stability, as shown in the TGA study and the PCFC test. Moreover, it was found that the modification of flexible polyurethane foam by the addition of a mixture of FPNX and EG fillers allows the best properties of this type of materials to be obtained. This result indicates that this type of modification could be an effective way to improve the thermal stability of FPF.     

Environmental friendly polysaccharide modification – microwave‐assisted oxidation of starch

A “green” method for oxidized starch preparation was presented. Hydrogen peroxide (H₂O₂) was used as the starch oxidant. Two main types of experiments were investigated: catalytic (by means of sodium tungstate – Na₂WO₄, the hydrogen peroxide activator) and non‐catalytic processes. The research covers low microwave level synthesis. Ninety and one hundred and ninety watts of microwave power were applied for the samples. All the microwave‐assisted reactions were compared to conventional ones carried out at 80 and 90°C, respectively. Reaction was monitored using manganometric determination of H₂O₂ consumption during the reaction progress. Obtained reaction products were tested by means of carbonyl and carboxyl group content. Additionally, molecular mass changes were investigated and a preliminary rheological study was done. The observed significant differences in the degree of oxidation (monitored by means of carboxyl and carbonyl group content) as well as the changes in molecular mass of polysaccharide comparing to those found at conventional conditions were showed and discussed.     

Preparation,Crystal Structure and Explosive Properties of Copper(II) Perchlorate Complex with 4‐Amino‐1,2,4‐Triazole and Water

A complex from copper(II) perchlorate with 4‐amino‐1,2,4‐triazole (4‐AT, C₂H₄N₄) was synthesized, and elemental composition, molecular structure, and explosive properties were determined. To this end, elemental and X‐ray analyses were carried out, sensitivity to mechanical and thermal stimuli was measured, mechanism of thermal decomposition was investigated, and kinetic parameters of decomposition were determined. In the next step measurements of heat of combustion and detonation velocity were performed. Detonation parameters were also calculated. It was stated that the complex has slightly distorted square bipyramidal (4+2) coordination. The four basal bonds are formed by nitrogen atoms of four 4‐AT molecules. The coordination of the metal is completed by two axial oxygen atoms, one of the perchlorate ion, and one of the water molecule. With respect to explosive properties, tetrakis(4‐AT)copper(II) perchlorate monohydrate belongs to the group of sensitive secondary explosives.     

Shear-horizontal vibration modes of an oblate elliptical cylinder and energy trapping in contoured acoustic wave resonators

We study shear-horizontal free vibrations of an elastic cylinder with an oblate elliptical cross section and a traction-free surface. Exact vibration modes and frequencies are obtained. The results show the existence of thickness-shear and thickness-twist modes. The energy-trapping behavior of these modes is examined. Trapped modes are found wherein the vibration energy is largely confined to the central portion of the cross section and little vibration energy is found at the edges. It is also shown that face-shear modes are not allowed in such a cylinder. The results are useful for the understanding of the energy trapping phenomenon in contoured acoustic wave resonators.     

PGS/HAp Microporous Composite Scaffold Obtained in the TIPS-TCL-SL Method: An Innovation for Bone Tissue Engineering

In this research, we synthesize and characterize poly(glycerol sebacate) pre-polymer (pPGS) (¹H NMR, FTiR, GPC, and TGA). Nano-hydroxyapatite (HAp) is synthesized using the wet precipitation method. Next, the materials are used to prepare a PGS-based composite with a 25 wt.% addition of HAp. Microporous composites are formed by means of thermally induced phase separation (TIPS) followed by thermal cross-linking (TCL) and salt leaching (SL). The manufactured microporous materials (PGS and PGS/HAp) are then subjected to imaging by means of SEM and µCT for the porous structure characterization. DSC, TGA, and water contact angle measurements are used for further evaluation of the materials. To assess the cytocompatibility and biological potential of PGS-based composites, preosteoblasts and differentiated hFOB 1.19 osteoblasts are employed as in vitro models. Apart from the cytocompatibility, the scaffolds supported cell adhesion and were readily populated by the hFOB1.19 preosteoblasts. HAp-facilitated scaffolds displayed osteoconductive properties, supporting the terminal differentiation of osteoblasts as indicated by the production of alkaline phosphatase, osteocalcin and osteopontin. Notably, the PGS/HAp scaffolds induced the production of significant amounts of osteoclastogenic cytokines: IL-1β, IL-6 and TNF-α, which induced scaffold remodeling and promoted the reconstruction of bone tissue. Initial biocompatibility tests showed no signs of adverse effects of PGS-based scaffolds toward adult BALB/c mice.     

Modeling, measurement, and a simple analytic approximation for the return loss of erbium-doped fiber amplifiers

When fiber-optic systems contain erbium-doped fiber amplifiers (EDFA), reflections are enhanced by the gain of the amplifiers and can degrade system performance. We present a simple approximate analytic expression for the return loss of pumped EDFAs, with and without discrete reflections that applies at both the signal and pump wavelengths. A novel return loss measurement test set is used to verify the validity of this expression for a particular EDFA design. Using a computer simulation, the return loss is computed as a function of EDFA design to assess the range of validity of the approximate expression. The expression serves as an easy way to chain amplifiers and accurately predict the effects of reflections in long systems.