Sensory evaluation of drinking water by consumer panels

The human senses play an important role in assessing the quality of food and of the environment. Particularly the chemical senses of taste and smell determine the pleasantness of foods and drinks and may provide a warning mechanism for the presence of more or less toxic contaminants. Even after the recent rapid development of powerful analytical techniques the human nose can easily detect trace amounts of chemicals at levels manytimes lower than the analytical detection limits.Although taste and odour assessment of drinking water has been practized inmany waterworks laboratories by small panels, relatively unreliable results were obtained and such sensory data played up till now only a minor role in the management of the water treatment plant. More sophisticated and reliable methods for sensory water quality evaluation are discussed. Special attention is given to the characteristics of the human senses of taste and smell, to which the methodology of sensory assessment should be better adapted. High numbers of observations on a sample are generally needed, for which purpose the use of large panels has to be realized. In this respect the help of large consumer panels is an alternative for the presently often used small laboratory groups. As an example the preliminary results of a large ongoing experiment of sensory water quality assessment by 2 consumer panels of 100 persons each in the Rotterdam area are discussed. Drinking water quality is judged at the consumer homes every week. The experiment started September 1979 and will be continued for one year.     

The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Contamination bacterienne d'une zone balneaire liee a sa frequentation

The bacterial contamination from bathers in the water and sand at a beach was investigated. Measurements were made of the composition of the cutaneous bacterial flora released by two bathers as well as the sensitivity of the main contaminants to solar radiation. The variations in bacterial concentration of the sea water and sand were determined at the sea shore over three complete day cycles. Broadly speaking, the concentration of some bacteria increases with the frequency with which the beach is used. Nevertheless, short-period variations seem to be masked by the opposing effects of solar radiation and bathers.     

Heavy metals in tissues of stranded short-finned pilot whales.

Selected tissues from four short-finned pilot whales that stranded at Cumberland Island National Seashore were analyzed for total cadmium, mercury and selenium by neutron activation. Cadmium reached a maximum mean wet weight concentration of 31.4 ppm in the kidney tissues. Maximum mean wet weight concentrations of mercury, 230.0 ppm, and selenium, 44.2 ppm, were found in the liver tissues. The lowest concentration of each metal was found in the blubber. Postmortem examination showed that the whales had no food in their stomachs. The whales must have been utilizing metabolic reserves, contaminated with residual concentrations of heavy metals, prior to beaching. This utilization of reserves probably resulted in the high concentrations of cadmium, mercury and selenium found in the liver and kidney tissues. Since the heavy metal concentrations were three to four times greater in the stranded whales, as compared to apparently healthy whales of the same species, it is suggested that heavy metal toxicosis may have been a factor contributing to this particular stranding.     

Effects of adding organic materials to an acid sulfate soil on the growth of cocoa (Theobroma cacao L.) seedlings

Acid sulfate soils having a pH of less than 3.5 are widespread in Malaysia. Some of these soils are planted to cocoa, but the yield is reported to be low due to soil infertility related to Al toxicity. Cocoa growth is sensitive to the presence of Al in the soil. To a certain extent, Al toxicity in soils can be reduced by organic matter application and to a greater extent in iron-poor acid sulfate soil. A study was conducted to determine the efficacy of various types of organic materials easily available in the country to ameliorate acid sulfate soil infertility for growing cocoa seedlings. The treatments were control (nil), lime (3 t/ha), peat (10% w/w), peat plus green manure (10% w/w), peat plus rice straw (10% w/w), peat plus chicken dung (10% w/w) and peat plus POMS (Palm oil mill sludge) (10% w/w). The growth of cocoa seedlings was affected significantly by the presence of Al in the cocoa tissues. As the amount of Al in the leaves increased, the relative top dry weight of cocoa seedlings decreased. Likewise, the relative plant height was negatively correlated with Al in the leaves. Peat as well as peat in combination with green manure, rice straw, chicken dung or palm oil mill sludge was able to reduce Al toxicity in acid sulfate soil; the highest top dry weight of cocoa seedlings were obtained in the peat plus green manure treatment. The best cocoa seedlings root growth was found for the peat treatment alone. The relative top dry weight of cocoa seedlings was negatively correlated with Al(3+) as well as Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution. The critical values for Al(3+) and the combination of Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution were 10 microM and 15 microM, respectively.     

Activated charcoal and microflora in water treatment

Significant sanitation was achieved by using 0.5% activated charcoal in influent and effluent of a wastewater treatment plant. The drastic reduction in the microorganisms was confirmed for twelve tester strains, including gram-positives, gram-negatives, Candida albicans, Vahlkampfia avara, Leptospira biflexa and Trichomonas foetus. The removal of microflora correlates positively with the quality of the activated charcoal used. Once adsorbed, the bacteria could not be eluted by salt, alkalinization or citric acid. Diatomaceous earth also eliminated some of the microflora, but white clay (Bolus alba) and zinc dust are inefficient. The activated carbon may be reused several times after regeneration by heat (2 h at 160°C), but eventually a slight decrease in adsorbing capacity occurs.     

The collapse of welded aluminium plate girders—an experimental study

Twenty-two tests conducted to study the collapse behaviour of welded aluminium girders are described. The girders are of varying proportions, have transverse or longitudinal web stiffeners and are subjected to different combinations of shear and bending loads. It is observed that, although shear sway mechanisms similar to those for steel girders do develop, the webs of aluminium girders may fracture in the heat affected zones adjacent to the perimeter welds. These fractures develop at some stage during the formation of the collapse mechanism and are the consequence, rather than the cause, of failure. It is shown that the tension field theory, originally developed for steel girders, may overestimate the shear-carrying capacity of aluminium girders and it is concluded that the theory requires some modification before it can be applied with confidence to aluminium girders.     

Online Documentation for Engineering Software: A Hypertext Application

Abstract: This article describes the use of 'hypertext' as a means to document engineering software online. An extensive hypertext document can be built with relative ease using an authoring tool. Hypertext documents enhance the learning process through the association of facts. The user has the freedom to arrange his/her own study sequence in a particular session. The article provides a brief introduction to the hypertext technology and authoring tools, and describes a Mohr's Circle program, which has been developed to explore the use of hypertext for online users' manuals. The strengths and weaknesses of the software tool, KnowledgePro, as well as the development techniques, are discussed.