Volatile compounds on the surface and within Iberian dry-cured loin

The profile of volatile compounds from external and internal areas of Iberian dry-cured loin was studied by headspace solid-phase microextraction. Higher levels of 16 volatile compounds (hexane, decane, 3-methylbutanal, several sulphur compounds and some aromatic hydrocarbons) were detected in the outer part of the loins. These differences could be owing to several factors, such as greater exposure to oxygen and dehydration conditions in the surface of the product, which favour oxidation reactions and Strecker degradation of amino acids. Moreover, the addition of spices on the surface and the proximity of a mould layer growing on the surface of the product could also contribute to the higher levels of these compounds on the external layer. However, other sulphur compounds coming from spices showed similar levels on the surface and within the loins. This different behaviour could be a consequence of different diffusion rates depending on the features of the compound and the matrix.     

Utilization of sludge in building material.

Several thermal solidification processes have been developed mainly in Japan. They are lightweight aggregates, brick, interlocking tile, char, and slag. A full-scale plant of them has been successfully operated for more than 10 years. The quality of the end products is better than the traditional ones. They are all substitutive to existing ones. The Japanese experience proves that all the processes are technically feasible, but not economically. Their manufacturing cost is always higher than market price. In addition, they consume large amounts of energy. However, if they are identified for a process of sludge disposal, all of them are worth considering for a big city where there is no place for the sludge to go. The end products can be reused inside the city. A new alternative is "Portland cement". A Portland cement manufacturer accepts sewage sludge, if being paid some amount of money. An average payment is US$100 each 1,000 kg of ash or sludge cake. The Portland cement manufacturer accepts either cake or ash at the same price. It is about 50 to 30% of the energy cost of thermal solidification. The question is which is the better, dewatered cake or incinerated ash, for the Portland cement application. The answer is "it depends on the distance between the sewage plant and the Portland cement plant."     

Characterization of the mechanism of interaction in ibuprofen-Eudragit RL100 coevaporates

The present study is a preliminary exploration of the affinity between a carboxylic model drug, the nonsteroidal antiinflammatory agent ibuprofen (IBU) and Eudragit RL100 (RL) polymer. Due to the presence of a variable amount of quaternary ammonium groups in this matrix, physical and chemical interaction with the carboxylic drug can occur, which reinforces its scant mechanical dispersion in the polymer network and can ultimately affect its release profile in vitro and in vivo. To study these aspects, IBU was mixed at increasing weight ratios and in different chemical forms (free acid, sodium salt, and n-butyl ester), to investigate further the role of the carboxylic group in the interaction with the RL polymer. Therefore, IBU-RL solid dispersions (coevaporates) were obtained and fully characterized in the solid state through spectroscopic, calorimetric, and x-ray diffractometric analyses. The in vitro release pattern of the drug, in the different chemical states, was studied for the coevaporates, compared with drug-RL physical mixtures, along with drug adsorption profiles from aqueous solutions on the surface of the polymer granules.     

Phytotoxicity and heavy metals speciation of stabilised sewage sludges

The presence of heavy metals in the sludges produced in wastewater treatment restricts plants growth and hence their use for agricultural purposes. This study looks at different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) and compares the distribution of the heavy metals that they contain according to the treatment that they have undergone. The sewage sludges were subjected to chemical characterisation and phytotoxicity testing (in absence of substrate) to provide a preliminary assessment of their suitability for land application. In addition, the total quantity of metals (Cd, Cr, Cu, Ca, K, Fe, Mg, Ni, Na, Pb and Zn) was determined. The Community Bureau of Reference (BCR) method for heavy metal speciation was followed. It was confirmed that the total concentration of heavy metals did not exceed the limits set out by European legislation and that the stabilisation treatment undergone by the sludges strongly influenced the heavy metal distribution and the phases to which they were associated. The sludge extracts did not exert any significant adverse effect on the relative seed germination (RSG) of barley (Hordeum vulgare L.) or cress (Lepidium sativum L.), although the reduction in germination index (GI) indicates that some characteristics existed did have an adverse effect on root growth.     

Study of condition-dependent decomposition reactions; Part I. The thermal behaviour and decomposition of 2-nitrobenzoyl chloride

The risks associated with batch processing in the manufacture of chemicals and pharmaceuticals via highly exothermic reactions are of special interest due to the possibility of runaway reactions. o-Nitrated benzoyl chlorides are intermediates in the production of agrochemicals and are produced via the reaction of o-nitrated carboxylic acids with thionyl chloride in a solvent mixture. ortho-Nitrated acyl chlorides have exploded violently on attempted distillation on numerous occasions. An inadequate investigation of the process prior to large-scale operation is the most likely cause. Here we present preliminary results of studies on the decomposition of 2-nitrobenzoyl chloride. This study has revealed that the decomposition reaction is strongly condition dependent. The heating rate of the sample plays a preponderant role in the course of the decomposition reaction. That renders the interpretation of differential scanning calorimetry (DSC) or adiabatic calorimetry measurements, which are routinely used to assess the thermochemistry and safety of the large-scale reactions, problematic. Following this on-going study, we report here key features of the system that have been identified.     

Morphological evaluation of bioartificial hydrogels as potential tissue engineering scaffolds

Poly(vinyl alcohol) hydrogels prepared by freeze-thawing procedure represent synthetic systems widely investigated as non-biodegradable scaffolds for tissue regeneration. In order to improve the biocompatibility properties of pure poly(vinyl alcohol) (PVA) hydrogels, blends of PVA with different biological macromolecules, such hyaluronic acid, dextran, and gelatin were prepared and used to produce bioartificial hydrogels. The porosity characteristics of these hydrogels were investigated by scanning electron microscopy and mercury intrusion porosimetry. The morphology of bioartificial hydrogels was evaluated and compared with that of pure PVA hydrogels. In particular the effect exerted by each biological component on pore size and distribution was investigated. The obtained results indicate that when a natural macromolecule is added to PVA the internal structure of the material changes. A small amount of biopolymer induces the structural elements of PVA matrix to take on a well evident lamellar appearance and an apparent preferential orientation. Comparing the results of SEM and mercury intrusion porosimetry it was concluded that hydrogels containing 20% of biological component have the most regular structure and at the same time the lowest total porosity. On the contrary samples with the highest content of natural polymer (40%) show the less regular structure and the highest total porosity.     

Influence of air abrasion preparation on microleakage in glass ionomer cement restorations

The aim of this study was to assess microleakage in class V cavities prepared by air abrasion or high-speed dental bur and restored with different glass ionomer cements. Sixty bovine incisors were equally divided into 6 groups: I, II and III (preparation by high-speed) and IV, V and VI (preparation by air abrasion). Groups I and IV were restored with Fuji IX; groups II and V with Ketac Molar; and groups III and VI with Vitremer. After 24 h (37 °C), specimens were thermocycled, isolated with nail varnish, immersed in a 0.2% Rhodamine B solution for 24 hours, sectioned longitudinally and analyzed for microleakage using an optical microscope connected to a digital camera and a computer. The images were digitized and a software allowed the quantitative evaluation of microleakage in millimeters. Data were analyzed by Wilcoxon and Kruskal-Wallis tests. It was observed that there were significant differences (p ≤ 0.05) between incisal (enamel) and cervical (dentine/cementum) margins, mainly for Ketac Molar; there was no difference (p ≥ 0.05) between preparation methods, except for group II (high-speed/Ketac Molar) that showed higher infiltration; regarding the materials, Ketac Molar demonstrated the highest microleakage values (p ≤ 0.05), and only Vitremer sealed completely both margins of restorations. It was concluded that air abrasion preparation did not influence microleakage in class V restorations with the employed glass ionomer cements.     

RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrate

RILEM RecommendationsRILEM TC 177-MDT: ‘Masonry Durability and on-site Testing’

RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrate     

Estimating the entropy rate of spike trains via Lempel-Ziv complexity

Normalized Lempel-Ziv complexity, which measures the generation rate of new patterns along a digital sequence, is closely related to such important source properties as entropy and compression ratio, but, in contrast to these, it is a property of individual sequences. In this article, we propose to exploit this concept to estimate (or, at least, to bound from below) the entropy of neural discharges (spike trains). The main advantages of this method include fast convergence of the estimator (as supported by numerical simulation) and the fact that there is no need to know the probability law of the process generating the signal. Furthermore, we present numerical and experimental comparisons of the new method against the standard method based on word frequencies, providing evidence that this new approach is an alternative entropy estimator for binned spike trains.