Direct-Ink-Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Considering the high levels of materials used in the fields of electronics and energy storage systems, it is increasingly necessary to take into consideration environmental impact. Thus, it is important to develop devices based on environmentally friendlier materials and/or processes, such as additive manufacturing techniques. In this work, poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) are prepared by direct-ink-writing (DIW) by varying solvent evaporation temperature and fill density percentage. Different morphologies for both polymers are obtained, including dense films and porous membranes, as well as different electroactive β-phase content, thermal and mechanical properties. The dielectric constant and piezoelectric d₃₃ coefficient for dense films reaches up to 16 at 1 kHz and 4 pC N⁻¹, respectively for PVDF-HFP with a fill density of 80 and a solvent evaporation temperature of 50 °C. Porous structures are developed for battery separator membranes in lithium-ion batteries, with a highest ionic conductivity value of 3.8 mS cm⁻¹ for the PVDF-HFP sample prepared with a fill density of 100 and a solvent evaporation temperature of 25 °C, the sample showing an excellent cycling performance. It is demonstrated that electroactive films and membranes can be prepared by direct-ink writing suitable for sensors/actuators and energy storage systems.     

Recovering gallium from residual bayer process liquor

Gallium is normally obtained by direct electrolysis as a by-product from Bayer process residual liquor at an aluminum processing plant. However, to permit any net accumulation of the metal, the gallium concentration must be at least about 0.3 g/l in the liquor. This article describes a continuous process of extraction with organic solvents and rhodamine-B, followed by a re-extraction step into aqueous media. The final product is a solid containing up to 18 wt.% Ga in a solid mixture of hydroxides and oxides of gallium and aluminum. This final product can then be electrolyzed to recover the gallium more efficiently.     

Low-Thermal-Conductivity Rare-Earth Zirconates for Potential Thermal-Barrier-Coating Applications

Rare-earth zirconates have been identified as a class of low-thermal-conductivity ceramics for possible use in thermal barrier coatings (TBCs) for gas-turbine engine applications. To document and compare the thermal conductivities of important rare-earth zirconates, we have measured the thermal conductivities of the following hot-pressed ceramics: (i) Gd₂Zr₂O₇ (pyrochlore phase), (ii) Gd₂Zr₂O₇ (fluorite phase), (iii) Gd_2.58Zr_1.57O₇ (fluorite phase), (iv) Nd₂Zr₂O₇ (pyrochlore phase), and (v) Sm₂Zr₂O₇ (pyrochlore phase). We have also measured the thermal conductivity of pressureless-sintered 7 wt% yttria-stabilized zirconia (7YSZ)—the commonly used composition in current TBCs. All rare-earth zirconates investigated here showed nearly identical thermal conductivities, all of which were ∼30% lower than the thermal conductivity of 7YSZ in the temperature range 25°–700°C. This finding is discussed qualitatively with reference to thermal-conductivity theory.     

SELECTIVITY STUDIES IN THE PHOTOCHLORINATION OF METHANE II: EFFECT OF THE RADIATION SOURCE OUTPUT POWER AND OUTPUT SPECTRAL DISTRIBUTION

The effect of the output power and output spectral distribution of the radiation energy fed to a photoreactor upon the reaction yield and selectivities is studied both theoretically and experimentally. The study aims at the analysis of these influences in a series reaction such as the photochlorination of methane where methylene chloride and eventually chloroform are the most valuable products. The computational model employed has been verified for a group of selected conditions by means of bench-sale experiments.

It is found that the chlorine conversion shows the expected square root dependence with respect to the Local Volumetric Rate of Energy Absorption (LVREA). This dependence, in a first approximation, can also be assigned to the effect of the radiation source output power upon yield. It is also found that by manipulating the amount of radiation power fed to the reactor it is possible to ascertain the operating conditions favoring the production of predetermined intermediate products (e.g., methylene chloride or chloroform).

It is concluded that the use of customized lamps especially designed for each particular product on the basis of feasible changes in the characteristics of the existing radiation sources will favor a selective and more economical production of some of the stable intermediates, i.e., lamp design is an important feature in any optimal process design.     

The Effects Of Humic Substances On Pinus Callus Are Reversed By 2,4-Dichlorophenoxyacetic Acid

The reversal of humic matter-induced inhibition of callus growth and metabolism by 2,4-dichlorophenoxyacetic acid (2,4-D) was studied in Pinus laricio. Two forest humic fractions (relative molecular mass (M_r) > 3500), derived from soil under Fagus sylvatica (Fs) and Abies alba (Aa) plantation, were used. Pinus laricio callus was grown for a subculture period (4 weeks) on Basal Murashige and Skoog (MS) medium plus forest humic matters (Fs or Aa), at a concentration of 1 mg C/l, and then was transferred, for an additional four weeks, to a MS medium culture without humic matter, but with different hormones: indole-3-acetic acid (IAA, 2 mg/1) or 2,4-dichlorophenoxyacetic acid (2,4-D, 0.5 mg/1) and/or 6-benzylaminopurine (BAP, 0.25 mg/1). Growth of calluse, glucose, fructose, and sucrose contents, and activities of soluble and bound invertases, glucokinase, phosphoglucose isomerase, aldolase, and pyruvate kinase were monitored. The results show a negative effect of humic fractions on callus growth, due to decreased utilization of glucose and fructose, and decreased activities of glycolytic enzymes. The effects are reversible. Substitution of humic fractions with 2,4-D+BAP or 2,4-D is followed by an increase of glycolytic enzyme activities and, consequently, by the utilization of glucose and fructose that induces a restart of growth. In contrast, the inhibitory effects of humic fractions persist when they are substituted with BAP alone, indicating that only the auxin 2,4-D is capable of reversing the negative effects. A possible competitive action on the auxin-binding site between 2,4-D and the chemical structures in the forest humic fractions is suggested.     

Learning control in spatial coordinates for the path-following of autonomous vehicles

We prove the existence of a P-type (proportional-type) space-learning control, which, on the basis of a kinematic third order nonlinear model of an autonomous nonholonomic vehicle and by a proper choice of the proportional control gain, guarantees asymptotic tracking of planar curves whose uncertain curvature is L$L$-periodic in the curvilinear abscissa. The behavior of a human driver, who repetitively learns the correct action from the past experience in the space, is mathematically reproduced. A stability analysis is presented while simulation results demonstrate the effectiveness of the presented approach.     

Curing of mixtures of epoxy resins and 4‐methyl‐1,3‐dioxolan‐2‐one with several initiators

Diglycidyl ether of bisphenol A or 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate were mixed with different proportions of 4‐methyl‐1,3‐dioxolan‐2‐one and cured using lanthanide triflates as initiators. In order to compare the materials obtained, conventional initiators such as boron trifluoride complexes and N,N‐dimethylaminopyridine were also tested. The curing process was followed by differential scanning calorimetry (DSC) and Fourier transform IR in attenuated total reflectance mode. This technique proved that the carbonate accelerates the curing process because it helps to form the active initiating species, although it was not chemically incorporated into the network and remained entrapped in the material. The DSC kinetic study was also reported. © 2006 Wiley Periodicals Inc. J Appl Polym Sci 102: 2086–2093, 2006     

Sketching human character animations by composing sequences from large motion database

Quick creation of 3D character animations is an important task in game design, simulations, forensic animation, education, training, and more. We present a framework for creating 3D animated characters using a simple sketching interface coupled with a large, unannotated motion database that is used to find the appropriate motion sequences corresponding to the input sketches. Contrary to the previous work that deals with static sketches, our input sketches can be enhanced by motion and rotation curves that improve matching in the context of the existing animation sequences. Our framework uses animated sequences as the basic building blocks of the final animated scenes, and allows for various operations with them such as trimming, resampling, or connecting by use of blending and interpolation. A database of significant and unique poses, together with a two-pass search running on the GPU, allows for interactive matching even for large amounts of poses in a template database. The system provides intuitive interfaces, an immediate feedback, and poses very small requirements on the user. A user study showed that the system can be used by novice users with no animation experience or artistic talent, as well as by users with an animation background. Both groups were able to create animated scenes consisting of complex and varied actions in less than 20 minutes.     

Online Coloring of Bipartite Graphs with and without Advice

In the online version of the well-known graph coloring problem, the vertices appear one after the other together with the edges to the already known vertices and have to be irrevocably colored immediately after their appearance. We consider this problem on bipartite, i.e., two-colorable graphs. We prove that at least ?1.13746?log₂(n)?0.49887? colors are necessary for any deterministic online algorithm to be able to color any given bipartite graph on n vertices, thus improving on the previously known lower bound of ?log₂ n?+1 for sufficiently large n. Recently, the advice complexity was introduced as a method for a fine-grained analysis of the hardness of online problems. We apply this method to the online coloring problem and prove (almost) tight linear upper and lower bounds on the advice complexity of coloring a bipartite graph online optimally or using 3 colors. Moreover, we prove that \(O(\sqrt{n})\) advice bits are sufficient for coloring any bipartite graph on n vertices with at most ?log₂ n? colors.     

Ion‐exchange resins. II. Acrylamide crosslinked copolymers as precursors for some ion exchangers

Crosslinked copolymers of acrylamide (AA) and ethylacrylate and some ion exchangers derived from them containing either primary amine groups, obtained by the Hofmann degradation of the amide groups, or carboxylic groups, obtained by the alkaline hydrolysis of the ester groups, were studied. Divinylbenzene and N,N′‐methylenebisacrylamide were used as crosslinkers. The starting copolymers and the corresponding ion exchangers were characterized by IR spectroscopy, swelling behavior, and thermogravimetric analysis. The ion‐exchanger properties were correlated with the crosslinker nature and the chemical reactions performed on the AA copolymers. The average molecular weight between two crosslinks, determined from the swelling data in water, was compared with that calculated on the basis of the copolymerization stoichiometry only for the carboxylic cation exchangers. In this way, the preservation of the crosslink density after the hydrolysis was revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2701–2707, 2003