Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors

A new approach for building a bio-conductive interface for enzyme immobilisation is described. This strategy permits very simple preparation of the enzyme biosensor and also reveals direct electron transfer features. A graphite-epoxy resin composite (GrEC) electrode modified with functionalised multi-wall carbon nanotubes (MWCNTs) immobilised by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide together with N-hydroxysuccinimide (EDC–NHS) in a chitosan (Chit) matrix was prepared and characterised by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of hexaammineruthenium (III) chloride. It was then used as a base for glucose oxidase (GOx) immobilisation by the simple method of crosslinking with glutaraldehyde (GA) with bovine serum albumin (BSA) as carrier protein. The resulting mediator-free biosensor was applied to the determination of glucose in amperometric mode at different applied potentials and the mechanism of reaction was also investigated by cyclic voltammetry, with and without dissolved oxygen in solution. Analytical parameters, as well as reproducibility, repeatability and stability were determined. Interferences were assessed using different compounds usually present in natural samples, such as wines, juices or blood, in order to evaluate the selectivity of the developed biosensor. The novel combination of carbon nanotubes immobilised with chitosan crosslinked with EDC–NHS and glucose oxidase immobilised by crosslinking with glutaraldehyde offers an excellent, easy to make biosensor for glucose determination without interferences.     

Near-Complete Remission of Glioblastoma in a Patient Treated with an Allogenic Dendritic Cell-Based Vaccine: The Role of Tumor-Specific CD4+T-Cell Cytokine Secretion Pattern in Predicting Response and Recurrence

Immunotherapy has brought hope to the fight against glioblastoma, but its efficacy remains unclear. We present the case of CST, a 25-year-old female patient with a large right-hemisphere glioblastoma treated with a dendritic–tumor cell fusion vaccine. CST showed a near-complete tumor response, with a marked improvement in her functional status and simultaneous increases in tumor-specific CD8+ and CD4+ T cells. Two months before recurrence, the frequency of tumor-specific T cells decreased, while that of IL-17 and CD4+ T cells increased. CST passed away 15 months after enrollment. In this illustrative case, the tumor-specific CD4+ T-cell numbers and phenotype behaved as treatment efficacy biomarkers, highlighting the key role of the latter in glioblastoma immunotherapy.     

Skin Inflammation Modulation via TNF-α, IL-17, and IL-12 Family Inhibitors Therapy and Cancer Control in Patients with Psoriasis

The systemic inflammatory syndrome concept is one of the foundations that stand at the basis of revolutionary modern and future therapies, based on the in-depth understanding of the delicate mechanisms that govern the collaboration between the systems and organs of the human body and, at the same time, the fine balance that ensures a reproach-free operation. An interesting concept that we propose is that of the environment-inadequacy status, a concept that non-specifically incorporates all the situations of the organism’s response disorders in the face of imprecisely defined situations of the environment. The correlation between these two concepts will define the future of modern medicine, along with the gene-adjustment mechanisms. Psoriasis is a clear example of an inadequate body response as a result of exposure to as of yet undefined triggers with an excessive systemic inflammatory reaction and hitherto insufficiently controllable. Modern biological therapies, such as TNF-α, IL-12 family, and IL-17 inhibitors, are intended to profoundly reshape the cytokine configuration of patients with inflammatory diseases such as psoriasis, with tremendous success in disease control. Yet, because of the important roles of cytokines in cancer promotion and control, concern was raised about the fact that the use of biologicals may alter immune surveillance and promote cancer progression. Both theoretical and practical data nevertheless showed that the treatment-induced control of cytokines may be beneficial for reducing the inflammatory milieu that promotes cancer and such have a beneficial role in maintaining health. We briefly present the intricate roles of those cytokine families on cancer control, with some debates on if their inhibition might or might not promote additional tumoral development.     

Synthesis of poly(urethane-urea) varnish bearing azobenzene chromophoric pendants

A new diol with azoaromatic pendant was prepared by N-phenyl-4-amido-3,4-dichloromaleimide with 2-mercaptoethanol in the presence of NaOH, and used to obtain photosensible poly(urethane-urea) varnish. A poly(urethane-urea) varnish bearing azobenzene chromophores, based on a poly(ethylene adipate)diol (average molecular weight—2000), 4,4′-dibenzyldiisocyanate, diethylene glycol, trimethylolpropane, and afore-mentioned diol, were prepared and characterized. The polymers were characterized by FTIR spectroscopy, thermal analysis (DMA, DSC, and TGA), and the photochromic behavior by UV irradiation of thin films was discussed.     

Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy

The microstructure and flow behaviour during thixo backward extrusion of 7075 aluminium alloy were investigated. Reheating the steel die and the aluminium billet placed into the die at the same time using an induction furnace provides rapidly a very homogeneous microstructure suitable for thixoforming. During thixoextrusion, despite the high solid fraction, the solid globules are weakly connected and slide over each other without any plastic deformation. The flow remains quasi homogeneous resulting in homogeneous induced microstructure of the component.     

Structural design of carbon/epoxy bio‐inspired wind turbine blade using fluid/structure simulation

The purpose of this paper is to present the structural design procedure of a low‐speed, horizontal axis, bio‐inspired wind turbine blade made of carbon/epoxy. The methodology initiates with the mechanical characterization of the carbon fiber composite material. An aerodynamic simulation using Computational Fluid Dynamics (CFD) method is performed in order to obtain the pressure distribution profile of the blade. This result is coupled with a Finite Element Analysis (FEA) to carry out an iterative design process through a Fluid‐Structure Interaction (FSI) simulation. Different stacking sequences of laminates are evaluated to find a configuration which allows balance between aerodynamic and dynamic inertial loads, ensuring an almost undeformed geometry during wind turbine's operation. The final structural design of the blade consists in six regions with different laminates. These are balanced and symmetric with distinct thickness characteristics and stacking sequences, which vary in three different orientations: 0^°, ± 45^° and 90^°, achieving a minimum deflection at the tip close to 3.11 cm, and a total weight of 3.6 kg of a 1.8 m radius blade, even with the restrictions imposed by the non‐conventional geometry. Copyright © 2016 John Wiley & Sons, Ltd.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.     

Biochemical characterisation and application of lipases produced by Aspergillus sp. on solid‐state fermentation using three substrates

Lipase from Aspergillus sp. obtained by solid‐state fermentation (SSF) on wheat bran (LWB), soybean bran (LSB) and soybean bran combined with sugarcane bagasse (LSBBC) were 67.5, 58 and 57.3 U of crude lipase per gram substrate, respectively. The optimum pH of activity and stability of the LWB was between 8 and 9, and the optimum temperature of activity and stability was 50 °C and up to 60 °C, respectively. The LSB and LSBBC showed two peaks of optimum pH (4 and 6) and optimal values of temperature and stability at 50 °C. The LSB was stable in the pH range of 6–7, while LSBBC in the range of pH 4–7. All the enzymes show activities on p‐nitrophenyl esters (butyrate, laurate and palmitate). LWB stood out either on the hydrolysis of sunflower oil, presenting 66.1% of the activity over commercial lipase and on the esterification of oleic acid and ethanol, surpassing the activities of the commercial lipases studied. The thin layer chromatography showed that LWB and LSB have produced ethyl esters from corn oil, while LWB produced it from sunflower oil.