Assessment of particle retention and clearance in the intrapulmonary conducting airways of hamster lungs with the fractionator1

A modified version of the fractionator was used to estimate the total number of polystyrene microspheres retained in the airways of hamster lungs at two different time points after inhalation. A systematic three-stage subsampling procedure with known sampling fractions was adopted. First, each lung was cut into slices, from which primary disectors were sampled systematically with a known sampling fraction. From each primary disector, smaller sub-disectors were subsampled, and the corresponding sampling fraction was estimated by point counting. Finally, a few particles were counted at the microscopic level in the sub-disectors, and the final estimate of total particle number (which is unbiased irrespective of any tissue deformations) was easily computed as a product of the counted number times the reciprocal of the successive sampling fractions. The error variance of each estimate was assessed from the data using a new estimator. An average of 6% of the deposited particles were retained on the epithelial surface of the intrapulmonary conducting airways shortly after the inhalation, from which at least one-third was already phagocytosed by macrophages. After 24 h, an average of 87% of the particles retained shortly after the inhalation had been cleared. The proportion of particles ingested by macrophages had increased to at least 87%, in three out of four animals studied.     

Missing Link between Helical Nano‐ and Microfilaments in B4 Phase Bent‐Core Liquid Crystals,and Deciphering which Chiral Center Controls the Filament Handedness

The range of possible morphologies for bent‐core B4 phase liquid crystals has recently expanded from helical nanofilaments (HNFs) and modulated HNFs to dual modulated HNFs, helical microfilaments, and heliconical‐layered nanocylinders. These new morphologies are observed when one or both aliphatic side chains contain a chiral center. Here, the following questions are addressed: which of these two chiral centers controls the handedness (helicity) and which morphology of the nanofilaments is formed by bent‐core liquid crystals with tris‐biphenyl diester core flanked by two chiral 2‐octyloxy side chains? The combined results reveal that the longer arm of these nonsymmetric bent‐core liquid crystals controls the handedness of the resulting dual modulated HNFs. These derivatives with opposite configuration of the two chiral side chains now feature twice as large dimensions compared to the homochiral derivatives with identical configuration. These results are supported by density functional theory calculations and stochastic dynamic atomistic simulations, which reveal that the relative difference between the para‐ and meta‐sides of the described series of compounds drives the variation in morphology. Finally, X‐ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) data also uncover the new morphology for B4 phases featuring p2/m symmetry within the filaments and less pronounced crystalline character.     

Investigation on partially replacing metakaolin with marine shell waste to produce sustainable eco-friendly geopolymer mortars

Clean Technologies and Environmental Policy - This work focuses on the effect of the incorporation of marine shell waste in different mass substitution rates in geopolymer mortars as an efficient...     

Model-driven performance prediction of systems of systems

Systems of systems exhibit characteristics that pose difficulty in modelling and predicting their overall performance capabilities, including the presence of operational independence, emergent behaviour, and evolutionary development. When considering systems of systems within the autonomous defence systems context, these aspects become increasingly critical, as constraints on the performance of the final system are typically driven by hard constraints on space, weight and power. System execution modelling languages and tools permit early prediction of the performance of model-driven systems; however, the focus to date has been on understanding the performance of a model rather than determining whether it meets performance requirements, and only subsequently carrying out analysis to reveal the causes of any requirement violations. Moreover, such an analysis is even more difficult when applied to several systems cooperating to achieve a common goal—a system of systems. In this article, we propose an integrated approach to performance prediction of model-driven real-time embedded defence systems and systems of systems. Our architectural prototyping system supports a scenario-driven experimental platform for evaluating model suitability within a set of deployment and real-time performance constraints. We present an overview of our performance prediction system, demonstrating the integration of modelling, execution and performance analysis, and discuss a case study to illustrate our approach.     

What if it Switched on the Sun? Exploring Creativity in a Brainstorming Session with Children Through a Vygotskyan Perspective

We contribute in this study a first step in theory-based understanding on how creativity in collaborative design sessions relates to the elements that are present in a creative act. These elements include group composition, objects present, practices used, and previous knowledge of the participants. The context of this study was our search for lightweight methods for technology design with children, which can be used in a school context with large groups, will require as little amount of training as possible, and can be set up quickly. We formed a mixed group, consisting of young children, an older child and an adult, with the aim of involving children in creative collaborative brainstorming during the very early phases of design, so as to come up with fruitful ideas for technology development. We report our process and examine the implications of our results in relation to different elements that trigger and affect creativity in the collaborative design process. Use of Vygotsky’s cycle of creativity as our theoretical lens together with timeline analysis method presented in the paper were essential for seeing beneath the surface of what happened in this complex, collaborative creative process. Our results can be used for further methodological development of creative collaborative sessions, both with children and adults.     

Synthesis and characterization of alternating silane copolymers: (Me2Si−R2Si−Me2Si) n

Bimodal molecular weight distributions of alternating copolymers of the type (Me₂Si?R₂Si?SiMe₂) _n , where R=hexyl and butyl, were obtained by polymerization of BrSiMe₂?R₂Si?Me₂SiBr, using the Wurtz coupling method. Analysis of the samples by pyrolysis GC MS and solution²⁹Si NMR indicated that some randomization occurred, due to cleavage of the original Si?Si bonds in the monomer. The extent of randomization was significantly greater in the high molecular weight fractions. Based on the nature of the rings from the py MGC/MS traces and the number on nonads found in the²⁹Si spectra, two types of randomization processes have been proposed, involving backbiting followed by (1) ring expulsion or (2) redistribution.     

Effects of dietary α-linolenic acid on the conversion and oxidation of13C-α-linolenic acid

The effects of a diet rich in α-linolenic acid vs. one rich in oleic acid on the oxidation of uniformly labeled¹³C-α-linolenic acid and its conversion into longer-chain polyunsaturates (LCP) were investigatedin vivo in healthy human subjects. Volunteers received a diet rich in oleic acid (n=5) or a diet rich in α-linolenic acid (n=7; 8.3 g/d) for 6 wk before and during the study. After 6 wk, subjects were given 45 mg of¹³C-α-linolenic acid dissolved in olive oil. Blood samples were collected att=0, 5, 11, 24, 96, and 336 h. Breath was sampled and CO₂ production was measured each hour for the first 12 h. The mean (±SEM) maximal absolute amount of¹³C-eicosapentaenoic acid (EPA) in plasma total lipids was 0.04 ±0.01 mg in the α-linolenic acid group, which was significantly lower (P=0.01) than the amount of 0.12±0.03 mg¹³C-EPA in the oleic acid group. Amounts of¹³C-docosapentaenoic acid (DPA) and¹³C-docosahexaenoic acid (DHA) tended to be lower as well. The mean proportion of labeled α-linolenic acid (ALA) recovered as¹³CO₂ in breath after 12 h was 20.4% in the ALA and 15.7% in the oleic acid group, which was not significantly different (P=0.12). The cumulative recovery of¹³C from¹³C-ALA in breath during the first 12 h was negatively correlated with the maximal amounts of plasma¹³C-EPA (r=−0.58,P=0.047) and¹³C-DPA (r=−0.63,P=0.027), but not of¹³C-DHA (r=−0.49,P=0.108). In conclusion, conversion of¹³C-ALA into its LCP may be decreased on diets rich in ALA, while oxidation of¹³C-ALA is negatively correlated with its conversion into LCP. In a few pilot samples, low¹³C enrichments of n−3 LCP were observed in a diet rich in EPA/DHA as compared to oleic acid.     

Atomic force microscopy of collagen structure in bone and dentine revealed by osteoclastic resorption

Mineralised tissues such as bone consist of two material phases: collagen protein fibrils, secreted by osteoblasts, form model structures for subsequent deposition of mineral, calcium hydroxyapatite. Collagen and mineral are removed in a three-dimensional manner by osteoclasts during bone turnover in skeletal growth or repair. Bone active drugs have recently been developed for skeletal diseases, and there is revived interest in changes in the structure of mineralised tissues seen in disease and upon treatment. The resolution of atomic force microscopy and use of unmodified samples has enabled us to image bone and dentine collagen exposed by the natural process of cellular dissolution of mineralised matrix. The morphology of bone and dentine has been analysed when fully mineralised and after osteoclast-mediated bone resorption, and compared with results from other microscopy techniques. Banded type I collagen, with 66.5+/-1.4 nm axial D-periodicity and 62.2+/-7.0 nm diameter, has been identified within resorption lacunae in bone and 69.4+/-4.3 nm axial D-periodicity and 140.6+/-12.4 nm diameter in dentine substrates formed by human and rabbit osteoclasts, respectively. This observation suggests a route by which the material and morphological properties of bone collagen can be analysed in situ, compared with collagen from non-skeletal sites, and contrasted in diseases of medical importance, such as osteoporosis, where skeletal tissue is mechanically weakened.     

Rugged Textile Electrodes for Wearable Devices Obtained by Vapor Coating Off‐the‐Shelf,Plain‐Woven Fabrics

Fabrics are pliable, breathable, lightweight, ambient stable, and have unmatched haptic perception. Here, a vapor deposition method is used to transform off‐the‐shelf plain‐woven fabrics, such as linen, silk, and bast fiber fabrics, into metal‐free conducting electrodes. These fabric electrodes are resistant to wear, stable after laundering and ironing, and can be body‐mounted with little detriment to their performance. A unique by‐product of conformally vapor coating plain‐woven fabrics is that textile parameters, such as thread material and fabric porosity, significantly affect the conductivity of the resulting fabric electrodes. The resistivities of the electrodes reported herein are linearly, not exponentially, dependent on length, meaning that they can be feasibly incorporated into garments and other large‐area body‐mounted devices. Further, these fabric electrodes possess the feel, weight, breathability, and pliability of standard fabrics, which are important to enable adoption of wearable devices.