Assessment of the environmental quality of two urbanized lotic systems using multiple indicators

Urbanization impacts ecosystems through loss and fragmentation of habitat, loss of diversity, increase in runoff, and contaminant discharges, and the invasion of exotic species. Potrero de los Funes Village (San Luis, Argentina) is experiencing not only a population increase during summer months due to tourism but also an accelerated growth of its permanent population. In order to evaluate the potential effects of urbanization, the environmental quality of Potrero de los Funes River and Las Chacras Stream was assessed, using physical–chemical and biological indicators. Macroinvertebrates, through the application of the Biotic Index for San Luis Sierras (BISLS), anuran amphibian richness and relative abundance, and riparian vegetation were used as bioindicators. While the Simplified Index of Water Quality (SIWQ) was used to characterize the physical–chemical quality of water at each site. SIWQ and BISLS scores were significantly different between sites (F_7,28 = 9.88, p < .001 and F_7,28 = 24.18, p < .001, respectively). SIWQ was significantly correlated with BISLS (Spearman correlation coefficient = 0.8, p < .001). Four anuran species were registered along Potrero River, with no significant differences in the intensity of vocalizations between sites. No species were detected in Las Chacras Stream. Average total plant species richness, exotic plants richness, and vegetation cover were higher at the most impaired system, Las Chacras Stream. The principal component analysis showed that the first two principal components (PCs) explained 76.3% of the total variance. PC1, with strong loadings of SIWQ, BISLS, and amphibian richness, was principally driven by chemical water quality and biological conditions. PC2 was mainly determined by plant richness. The chemical and biological water quality of Potrero and Las Chacras is somewhat impaired, being the upper Las Chacras Stream the most compromised area. This study provides information that will certainly be used to manage future impacts of urbanization on aquatic resources.     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.     

Application of the classical levels of intelligence to structuring the control system in an automated distribution centre

Traditional management and control models can benefit from added levels of intelligence to increase their capability to adapt to the continuous changes in global markets. After reviewing the classical definition of intelligence and its levels, this paper provides a new approach to help increase the responsiveness of management and control to changes and disturbances in the manufacturing supply chain. The ancient concept of the “Tertium Quid” has inspired a three-level community of agents (MAS-TRIO) that is proposed to improve the coordination of all actors involved. The proposed model combines Multi-Agent Systems (MAS) with Radio-Frequency Identification (RFID) to make possible a certain level of Autonomous Intelligence in the decision-taking process. This paper analyses how these levels of intelligence can be applied to management and control, and the performance of the proposed model has been tested at low and mid-levels on an experimental platform representing the facilities of a distribution centre controlled by a network of programmable logic controllers (PLCs).     

Crystallinity and thermal properties of ethylene-1-decene copolymers

Summary Three copolymers of ethylene and 1-decene, covering a wide range of compositions, have been synthesized with a MgCl₂-supported Ziegler-Natta catalyst. The analysis by DSC and X-ray shows a great degree of heterogeneity in these copolymers and appreciable levels of crystallinity, corresponding to the orthorhombic lattice of polyethylene, are present even for very high 1-decene contents.     

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties

Polyethylene-layered silicate nanocomposites were prepared by the in situ intercalative polymerization of ethylene by the so-called polymerization-filling technique and analyzed by transmission electron microscopy (TEM), X-ray diffraction analysis (XRD), differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Non-modified montmorillonite and hectorite were first treated by trimethylaluminum-depleted methylaluminoxane before being contacted by a Ti-based constrained geometry catalyst. The nanocomposite was formed by addition and polymerization of ethylene. In the absence of a chain transfer agent, ultra high molecular weight polyethylene was produced. The tensile properties of these nanocomposites were poor and essentially independent of the nature and content of the silicate. Upon hydrogen addition, the molecular weight of the polyethylene was decreased with parallel improvement of the tensile and shear moduli, in relation to the filler content. The exfoliation of the layered silicates was confirmed by XRD analysis and TEM observation. The mechanical kneading of the molten nanocomposites resulted in the partial collapse of the exfoliated structure driven by the thermodynamic stability of the layered filler.     

Fitting polynomial surfaces to triangular meshes with Voronoi squared distance minimization

This paper introduces Voronoi squared distance minimization (VSDM), an algorithm that fits a surface to an input mesh. VSDM minimizes an objective function that corresponds to a Voronoi-based approximation of the overall squared distance function between the surface and the input mesh (SDM). This objective function is a generalization of the one minimized by centroidal Voronoi tessellation, and can be minimized by a quasi-Newton solver. VSDM naturally adapts the orientation of the mesh elements to best approximate the input, without estimating any differential quantities. Therefore, it can be applied to triangle soups or surfaces with degenerate triangles, topological noise and sharp features. Applications of fitting quad meshes and polynomial surfaces to input triangular meshes are demonstrated.     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.     

A new variety of low-linolenic rapeseed oil; Characteristics and room-odor tests

Two Canadian rapeseed oils, “Westar” and “low-linolenic”, supplied by the Canola Council were studied and compared with a French rapeseed. The linolenic acid content of the low-linolenic variety is about 3%. This drop in the C18∶3 is completely compensated for by an increase in the C18∶2. Seventy-two percent of the triglycerides with at least one linolenic chain disappeared. A strong increase in the OOL and OLL was observed. The room-odor tests showed that the “low-linolenic” had a significantly higher odor score than the French rapeseed and the “Westar”, both of these being very similar. A fruity odor dominated in the “low-linolenic”, and the fishy painty odors were particularly reduced.     

FA composition and regiospecific analysis of Acer saccharum (sugar maple tree) and Acer saccharinum (silver maple tree) seed oils

GC analysis was performed to determine regiospecific distribution and FA composition in seed oils of the Aceraceae species, Acer saccharum and A. saccharinum. The oil content in the seeds was low at 5.0% in A. saccharum and 5.8% in A. saccharinum, and the main FA were linoleic (30.8 and 29.4%), oleic (21.3 and 27.6%), palmitic (10.1 and 10.5%), and cis-vaccenic (9.4 and 7.9%) acids, respectively. In addition, both oils contained long-chain monoenes of the n−9 and n−7 groups, including 11-eicosenoic, 13-docosenoic, 15-tetracosenoic, 13-eicosenoic, and 15-docosenoic acids, whereas γ-linolenic acid accounted for 0.8% of total FA in A. saccharum, and 0.5% in A. saccharinum. Regiospecific analysis, performed using the methodology of dibutyroyl derivatives of MAG, indicated that linoleic, oleic, and linolenic acids were mainly esterified at the internal position of TAG in both seed oils, whereas long-chain monoenes of the n−7 group were almost exclusively esterified on the external positions.