CLA isomers in milk fat from cows fed diets with high levels of unsaturated fatty acids

The concentrations of CLA isomers were determined by Ag⁺-HPLC in the milk fat of cows fed a control diet consisting of hay ad libitum and 15 kg of fodder beets or this diet supplemented with oilseeds containing either high levels of oleic acid (rapeseed), linoleic acid (sunflower seed), or α-linolenic acid (linseed). Highly significant (P≤0.001) correlations were found between the daily intakes of oleic acid and the concentration of the CLA isomer trans-7,cis-9 in milk fat; of linoleic acid and the CLA isomers trans-10,trans-12, trans-9,trans-11, trans-8,trans-10, trans-7,trans-9, trans-10,cis-12, cis-9,trans-11, trans-8,cis-10, and trans-7,cis-9; and of α-linolenic acid and the CLA isomers trans-12,trans-14, trans-11,trans-13, cis,trans/trans,cis-12,14, trans-11,cis-13, and cis-11,trans-13. CLA concentrations were also determined in the milk fat of cows grazing in the lowlands (600–650 m), the mountains (900–1210 m), and the highlands (1275–2120 m). The concentrations of many isomers were highest in milk fat from the highlands, but only three CLA isomers (cis-9,trans-11, trans-11,cis-13, and trans-8,cis-10) showed a nearly linear increase with elevation. Therefore, these three CLA isomers, and particularly the CLA isomer trans-11,cis-13, the second-most important CLA in milk fat from cows grazing at the three altitudes, could be useful indicators of milk products of Alpine origin.     

Antifungal Activity of Lactic Acid Bacteria Isolated from Peanuts,Gari, and Orange Fruit Juice against Food Aflatoxigenic Molds

This study aims to evaluate the antifungal activity of lactic acid bacteria (LAB) from some Cameroonian food commodities against mycotoxigenic and spoilage molds. Following LAB isolation, the antifungal activity of the isolates was assessed. The organic acids were quantified using high-performance liquid chromatography and the ability of the LAB to reduce mold biomass and aflatoxin production was evaluated. The LAB were identified and the biopreservative potential of strain LO3 was evaluated on tomato paste. Nine percent of the strains isolated showed broad antifungal activity. The activity was due to the effect of organic acids comprising lactic, acetic, 4-hydroxy-3-phenyllactic and 3-phenyllactic acids. Lactobacillus plantarum LO3 exhibiting the highest and broadest antifungal activity was selected and showed the capacity to inhibit fungal growth and aflatoxin production in vitro. Moreover, this strain and its cell-free supernatant showed the ability to prevent aflatoxigenic mold growth in tomato paste without altering its physico-chemical and organoleptic properties.     

Mapping micromechanical properties of soft polymer contact lenses

We present comparative micromechanical characterization of several commercial soft silicone hydrogel contact lenses, which allows for the examination of spatial distribution of different regions with local mechanical properties within the lens under practical wet conditions. We employ elastic contact mechanic model and corresponding analysis of force–distance curves collected with high-resolution atomic force microscopy measurements performed within elastic deformation limits. The measurements were performed on the lens cross section to map the micromechanical properties distribution within the sub-surface regions and bulk material of the different lens. In addition, we have studied topography and mechanical properties of the lens surfaces, which come into direct contact with the surface of the eye and eyelid. AFM images show high contrast distribution maps for the adhesive and mechanical properties of the different microstructured regions such as pores, lamellae and different material inclusions within the lenses. Additional indentation experiments allow for collection of quantitative data for micromechanical properties from different regions within the lens structure and correlate these data with lens-averaged macroscopic measurements available in the literature.     

Electrochemical characterization of electrolytes for lithium-ion batteries based on lithium difluoromono(oxalato)borate

The salt lithium difluoromono(oxalato)borate (LiDFOB) showed some promising results for lithium-ion-cells. It was synthesized via a new synthetic route that avoids chloride impurities. Here we report the properties of its solutions (solvent blend ethylene carbonate/diethyl carbonate (3:7, mass ratio), including its conductivity, cationic transference number, hydrolysis, Al-current collector corrosion-protection ability and its cycling performance with some electrode materials. Some Al-corrosion studies were also performed with the help of our recently developed computer controlled impedance scanning electrochemical quartz crystal microbalance (EQCM) that proofed to be a useful tool for battery material investigations.     

Modular Functionalization of Electrodes by Cross‐Coupling Reactions at Their Surfaces

Due to the increasing importance of modified electrodes for many applications in nanotechnology, including molecular electronics, bioelectronics, and sensors, there is a need to find ways to chemically attach suitable molecular films onto the electrodes. Combining the electroreduction of aryl diazonium salts with the Sonogashira cross‐coupling reaction, a new modular technique to modify electrodes is presented. The new technique allows a wide range of functional groups to be introduced onto electrode surfaces with high surface coverage by the functional subunit. Various organic subunits, including redox chromophores, are successfully attached to platinum electrodes. The corresponding films are characterized using cyclic voltammetry, X‐ray photoelectron spectroscopy, atomic force microscopy, and contact‐angle measurements. The electroreduction of diazonium salts is successfully achieved on a broad variety of conducting and semiconducting surfaces, which shows that the technique is applicable to a broad variety of substrates.     

Model-based implementation of distributed systems with priorities

Model-based application development aims at increasing the application’s integrity by using models employed in clearly defined transformation steps leading to correct-by-construction artifacts. In this paper, we introduce a novel model-based approach for constructing correct distributed implementation of component-based models constrained by priorities. We argue that model-based methods are especially of interest in the context of distributed embedded systems due to their inherent complexity (e.g., caused by non-deterministic nature of distributed systems). Our method is designed based on three phases of transformation. The input is a model specified in terms of a set of behavioral components that interact through a set of high-level synchronization primitives (e.g., rendezvous and broadcasts) and priority rules for scheduling purposes. The first phase transforms the input model into a model that has no priorities. Then, the second phase transforms the deprioritized model into another model that resolves distributed conflicts by incorporating a solution to the committee coordination problem. Finally, the third phase generates distributed code using asynchronous point-to-point message passing primitives (e.g., TCP sockets). All transformations preserve the properties of their input model by ensuring observational equivalence. All the transformations are implemented and our experiments validate their effectiveness.     

Three-dimensional imaging laser radar with a photon-counting avalanche photodiode array and microchip laser

We have developed a threedimensional imaging laser radar featuring 3-cm range resolution and single-photon sensitivity. This prototype direct-detection laser radar employs compact, all-solid-state technology for the laser and detector array. The source is a Nd:YAG microchip laser that is diode pumped, passively Q-switched, and frequency doubled. The detector is a gated, passively quenched, two-dimensional array of silicon avalanche photodiodes operating in Geigermode. After describing the system in detail, we present a three-dimensional image, derive performance characteristics, and discuss our plans for future imaging three-dimensional laser radars.     

Self-sacrificial leadership and follower self-esteem: When collective identification matters.

In the present research, we examine whether leader's self-sacrifice positively influences followers' self-esteem and whether followers' identification with the collective plays a role in this process. It was predicted that leader self-sacrifice would influence followers' self-esteem, but particularly so when followers exhibited strong (vs. weak) collective identification. Results from an organizational survey showed that leader self-sacrifice and collective identification interacted in predicting follower self-esteem, such that followers' self-esteem was higher when they identified strongly with the collective and when the leader was self-sacrificial (vs. self-benefiting). An experimental scenario study replicated this interactive effect between collective identification and leader's self-sacrifice on followers' self-esteem and also showed that this effect was (at least partly) mediated by followers' perceptions of whether the leader respected and valued the group. Implications with respect to the relationship between self-sacrifice and self-esteem are outlined, and possible integrations of leader self-sacrifice, identity, and empowerment are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Decay Rates for a Beam with Pointwise Force and Moment Feedback

We consider the Rayleigh beam equation and the Euler–Bernoulli beam equation with pointwise feedback shear force and bending moment at the position ξ in a bounded domain (0,π) with certain boundary conditions. The energy decay rate in both cases is investigated. In the case of the Rayleigh beam, we show that the decay rate is exponential if and only if ξ/π is a rational number with coprime factorization ξ/π=p/q, where q is odd. Moreover, for any other location of the actuator we give explicit polynomial decay estimates valid for regular initial data. In the case of the Euler–Bernoulli beam, even for a nonhomogeneous material, exponential decay of the energy is proved, independently of the position of the actuator. Date received: October 30, 2000. Date revised: December 20, 2001.