Spectral analysis in ultraweak emissions of chemi- and electrochemiluminescence systems

Investigation of ultraweak emissions in the processes of chemiluminescence, CL, and electrochemiluminesce, ECL, requires special techniques of their recording and spectral analysis. From among the hitherto proposed methods of detection of the emission spectra of these processes, that of the cut-off filter was most sensitive. The usefulness of this method in interpretation of the CL and ECL systems of the quantum yields in the range 1×10⁻⁹−1×10⁻¹¹ containing ions and complexes of Eu(III), Tb(III) and Dy(III) was shown. Exceptional character of the emission bands of lanthanide ions, being a result of the f-f electron transitions and in particular their low FWHM, permitted the application of the cut-off filter method to their analysis. The results obtained for CL and ECL on the basis of analysis of ultraweak emission proved to be successful in analytical applications. The systems containing Eu(III) ions hydrated or complexed with organic ligands enabled inferring changes in the coordination sphere of the ions.     

Ventilation system with spiral recuperator

A new kind of longitudinal flow spiral recuperator for the heat recovery in ventilation systems of buildings was studied experimentally and analytically.The aim of this work is to analyze the possibility of using air handling units with new type of spiral recuperator in order to recover heat in ventilation systems of buildings. For the reason that the air flows are parallel to the symmetry axis of the longitudinal flow spiral recuperator, in this unit pressure drops are smaller than in commonly known spiral exchangers. Because of the counter flow, a greater value of thermal effectiveness ? is reached for the same value of the number of transfer units in comparison to cross-flow recuperators.The exploitation of the new type of spiral recuperator in winter periods brings significant savings. The results obtained from computations are very encouraging for a widespread use of these devices.     

Structural defects in PbMoO4 single crystals doped with Co ions

Pure and Co-doped PbMoO₄ crystals, were studied using reflection high energy electron diffraction (RHEED), optical and dielectric methods. The calculated lattice constants for PbMoO₄:Co (0.2 mol%) were determined as being equal to: a = 5.54 ± 0.05 Å and c = 11.96 ± 0.05 Å. The absorption spectra of “as grown” and annealed pure and Co-doped PbMoO₄ crystals were examined. The results of dielectric measurements gave the conductivity activation energy of highly Co-doped PbMoO₄ crystals (0.5 and 1.0 mol%) equal to 0.40 and 0.46 eV, respectively.     

Correlating the effects of ash elements and their association in the fuel matrix with the ash release during pulverized fuel combustion

During pulverized fuel combustion, inorganic elements such as alkalis, sulfur, chlorine, calcium and magnesium, as well as a range of minor elements are partly released into the gas phase. These gas-borne species can nucleate, coagulate and condense to form either aerosol particles or sticky layers on ash particles, leading to ash deposition and corrosion problems in power utilities. Furthermore, the fine aerosols can lead to harmful gaseous and particulate emissions. It is well documented that the mode of occurrence and the chemical speciation of ash forming elements in the coal/biomass structure are important for the release behavior of mineral components. In the presented work, this is investigated by performing quantitative elemental investigations of ash releases for two different coals (a Polish and a UK coal) and six diverse biomass fuels (Wood bark, Wood chips, Waste wood, Olive residue, Saw dust and Straw). The tests are performed within the Lab-scale Combustion Simulator (LCS) of the Energy Research Centre of the Netherlands (ECN). The operating conditions applied were that of a typical pulverized fuel (PF) fired boiler i.e. atmospheric pressure, high temperatures of 1400-1650 °C, and high heating rate of 10⁵ K/s. Gas phase elemental release of alkalis, sulfur, chlorine, calcium and magnesium has been quantified at relevant high carbon conversion levels. With the performed set of experiments several of the past observations from the literature are reconfirmed. In addition to this, based on the extensive data pool at hand, a simple but reliable (R² > 0.95) set of linear correlations have been proposed to predict the elemental release of potassium, sodium, chlorine and sulfur. It is also concluded that such linear expressions can be particularly effective for the prediction of elemental release from the fuels of similar characteristics, such as woody biomass.     

Novel adhesive system based on 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) and hyperbranched polyglycerols

Two hyperbranched polyglycerols bearing 1,1,1-tris(hydroxymethyl)propane or Bisphenol A core and terminal hydroxyl functionality were examined as components of novel wood adhesive systems. Two 1,3-dimethylol-4,5-dihydroxyethyleneurea resins (DMDHEU) were used as crosslinkers. Shear strength tests revealed that the adhesives containing up to 75 wt% of renewable glycerol-derived polyglycerols retained performance comparable to that of neat DMDHEU. The results give way to extending the area of application of hyperbranched polyglycerols in the field of wood adhesives.     

Nano-Mechanical Properties of Modified Poly(Methyl Methacrylate) Films Studied by Atomic Force Microscopy

Atomic force microscopy (AFM) has been used to study the effect of various photoinitiators doped into poly(methyl methacrylate) (PMMA) on the mechanical properties of PMMA films at the nanometer scale. Pure and modified PMMA films (containing four different photoinitiators) were exposed to a mercury vapor lamp in air atmosphere. Force–distance curves for hardness, Young modulus, and adhesion forces were obtained using different AFM modes (tapping or contact-mode) and different tips (diamond or silicon nitride). The results revealed that the added photoinitiators slightly changed the nanomechanical properties of PMMA as a result of alterations in the photochemical reactions and physical processes occurring in the studied systems. tert-Butyl peroxybenzoate had the most efficient effect on the measured parameters in UV-irradiated PMMA, whereas benzoyl peroxide was less active. The mechanism of the observed processes is discussed.     

Technical foundations for noninvasive assessment of changes in the width of the subarachnoid space with near-infrared transillumination-backscattering sounding (NIR-TBSS)

This paper presents technical foundations for a new technique of near-infrared transillumination-backscattering sounding, which is designed to enable noninvasive detection and monitoring of changes in the width of the subarachnoid space (SAS) and magnitude of cerebrovascular pulsation in humans. The key novelty of the technique is elimination of influence of blood flow in the scalp on the signals received from two infrared sensors-proximal and distal. A dedicated digital algorithm is used to estimate on line the ratio of the powers of received signals, referred to as two-sensor distal-to-proximal received power quotient, TQ (t). The propagation duct for NIR radiation reaching the distal sensor is the SAS filled with translucent cerebrospinal fluid. Information on slow fluctuations of the average width of the SAS is contained in the slow-variable part of the TQ (t), called the subcardiac component, and in TQ itself. Variations in frequency and magnitude of faster oscillations of the width of that space around the baseline value, dependent on cerebrovascular pulsation, are reflected in instantaneous frequency and envelope of the fast-variable component. Frequency and magnitude of the cerebrovascular pulsation depend on the action of the heart, so this fast-variable component is referred to as the cardiac component.     

Protein kinase C regulates a vesicular class of calcium channels in the bag cell neurons of aplysia

Protein kinase C (PKC) acutely increases calcium currents in Aplysia bag cell neurons by recruiting calcium channels different from those constitutively active in the plasma membrane. To study the mechanism of PKC regulation we previously identified two calcium channel alpha1-subunits expressed in bag cell neurons. One of these, BC-alpha1A, is localized to vesicles concentrated primarily in somata and growth cones. We used antibodies to BC-alpha1A to analyze its expression in the bag cell neurons of juvenile Aplysia at a developmental stage at which PKC-sensitive calcium currents have previously been shown to be low. We find that vesicular BC-alpha1A staining is generally reduced in juvenile bag cell neurons but that its expression level can vary among juvenile animals. In 17 bag cell clusters examined, the percentage of neurons that displayed punctate alphaBC-alpha1A staining ranged from 0 to 85%. Sampling of calcium currents from cells of the same clusters by whole cell patch-clamp techniques revealed that the PKC-sensitive calcium current density is significantly correlated with the degree of vesicular staining. In contrast, no correlation of basal calcium current levels with aBC-alpha1A staining was found. These results strongly suggest that BC-alpha1A, a member of the ABE-subfamily of calcium channels, carries the PKC-sensitive calcium current in bag cell neurons. They are consistent with a model in which PKC recruits channels from the vesicular pool to the plasma membrane.