An informationally complete Wigner function for the Tavis–Cummings model

Journal of Computational Electronics - Here we consider an informationally complete Wigner function approach to look at multiple atoms (qubits) coupled to a field mode. We consider the...     

Some aspects of the role of coal thermoplasticity and coke structure in coal gasification. 2. The effects of pressure and heating rate on dilatometric parameters and optical anisotropy development

An examination of the influence of pressure and heating rate on the thermoplastic properties of a weakly coking coal and of coal with various pitch-like additives was carried out using a high pressure dilatometer. Pressure up to 4 MPa markedly increased the swelling properties and increased the plastic range by decreasing the softening temperature, but the effects of pressure were strongly influenced by rate of heating with high heating rates enhancing the effects. Additions of tar or pitch also enhanced swelling at low pressure. The solid carbonization residues from the dilatometer were examined by polarized light microscopy to determine the content and composition of optically anisotropic species. The anisotropic content was increased by increases in pressure and heating rate and pitch additives enhanced the anisotropic content, especially at low pressure, without affecting the composition of the anisotropy. No direct correlations exist between the dilatometric parameters and the optical anisotropy but their dependence on the conditions emphasizes that when considering high pressure gasification of coal, it is necessary to obtain data under appropriate conditions.     

Dynamics of fluid circulation in coupled free and heterogeneous porous domains

Fluid flow in coupled free and porous domain, particularly when the porous medium is heterogeneous, is encountered in many hydro-environmental conditions, e.g., leakage from underground pipe, combined groundwater lake-subsurface interactions. One of the most difficult problems in the study of coupled flow behaviour has been the development of a universally applicable modelling scheme for combining the flow regimes. This is because the free/porous interfacial properties (e.g., shear-stress; velocity slip) that govern the coupled flow behaviour are difficult to determine experimentally under hydro-environmental conditions. On the other hand, the implications of various forms of heterogeneity in the porous media properties can be very different on the fluid-flow behaviour. Difficulties may also arise in direct coupling of the model equations that govern the fluid flow in the individual regions (e.g., Navier-Stokes for free-flow region and the Darcy's equation for the porous flow region). Consequently, models of coupled free and porous flow for hydro-environmental conditions are not very well developed at the moment. While there are some indications that fluids in coupled free and porous domains may circulate (i.e., development of flow cells), there is a lack of appropriate 3D analysis on how heterogeneities in porous media may affect such flow patterns. In this paper, we aim to analyse how porous media heterogeneity affects the dynamics of flow circulation in the porous side of a coupled free and porous domain. For this purpose, we analyse flow patterns in several model domains made up of two porous layers with differing permeabilities. The governing model equations are discretised and solved using the standard finite volume method on a staggered cell-centred mesh. The temporal discretisation is done using the explicit method. An in-house graphical user interface (GUI) has been created specifically to aid in the visualisation of otherwise complex flow patterns. The GUI contains many post-processing options and provides a comprehensive tool for the analysis of hydrodynamics and contaminant motion (not discussed in this paper) in coupled free and porous flow domains. This GUI is described in this paper briefly. The effects of altering the aspect ratio (i.e., multi-scale) of the domain on the coupled flow pattern have also been discussed.     

Automatic and Efficient Human Pose Estimation for Sign Language Videos

We present a fully automatic arm and hand tracker that detects joint positions over continuous sign language video sequences of more than an hour in length. To achieve this, we make contributions in four areas: (i) we show that the overlaid signer can be separated from the background TV broadcast using co-segmentation over all frames with a layered model; (ii) we show that joint positions (shoulders, elbows, wrists) can be predicted per-frame using a random forest regressor given only this segmentation and a colour model; (iii) we show that the random forest can be trained from an existing semi-automatic, but computationally expensive, tracker; and, (iv) introduce an evaluator to assess whether the predicted joint positions are correct for each frame. The method is applied to 20 signing footage videos with changing background, challenging imaging conditions, and for different signers. Our framework outperforms the state-of-the-art long term tracker by Buehler et al. (International Journal of Computer Vision 95:180–197, 2011), does not require the manual annotation of that work, and, after automatic initialisation, performs tracking in real-time. We also achieve superior joint localisation results to those obtained using the pose estimation method of Yang and Ramanan  (Proceedings of the IEEE conference on computer vision and pattern recognition, 2011).     

Effect of Grain Size on Mechanical Properties of Submicrometer 3Y-TZP: Fracture Strength and Hydrothermal Degradation

This paper considers fracture strength, fracture origins, and hydrothermal degradation of 3Y-TZP with grain sizes in the range of 110–480 nm. Biaxial fracture strength testing was used to show that the fracture strength increases with grain size and is governed by the concurrent change in fracture toughness. Hydrothermal degradation was studied by means of fractography, Raman microscopy and its effect on fracture strength. Up to 200 nm grain size, hydrothermal degradation of strength is limited. Larger grain sizes exhibit either premature failure or an increase in strength. A surface transformation zone was found to be responsible for both phenomena.     

Highly Transparent Lu-α-SiAlON

Novel Lu-α-SiAlON ceramics were produced by hot pressing mixtures of Si₃N₄, Lu₂O₃, AlN, and Al₂O₃ at 1950°C for 2 h in a nitrogen atmosphere. The resultant SiAlON was fully dense and possessed a uniform, equiaxed microstructure with a grain size of ∼1 μm, which resulted in a high hardness of >19 GPa. In addition to high hardness, the sample showed very high optical transparency in the visible light region, with >70% transmission at higher wavelengths. This high transparency was attributed to the uniform, dense microstructure and lack of residual grain-boundary phase.     

Interactional Order and Constructed Ways of Seeing with Touchless Imaging Systems in Surgery

While surgical practices are increasingly reliant on a range of digital imaging technologies, the ability for clinicians to interact and manipulate these digital representations in the operating theatre using traditional touch based interaction devices is constrained by the need to maintain sterility. To overcome these concerns with sterility, a number of researchers are have been developing ways of enabling interaction in the operating theatre using touchless interaction techniques such as gesture and voice to allow clinicians control of the systems. While there have been important technical strides in the area, there has been little in the way of understanding the use of these touchless systems in practice. With this in mind we present a touchless system developed for use during vascular surgery. We deployed the system in the endovascular suite of a large hospital for use in the context of real procedures. We present findings from a study of the system in use focusing on how, with touchless interaction, the visual resources were embedded and made meaningful in the collaborative practices of surgery. In particular we discuss the importance of direct and dynamic control of the images by the clinicians in the context of talk and in the context of other artefact use as well as the work performed by members of the clinical team to make themselves sensable by the system. We discuss the broader implications of these findings for how we think about the design, evaluation and use of these systems.     

The technology of halogen-free flame retardant phosphorus additives for polymeric systems

Halogen-free flame retardant additives based on phosphorus function by developing a protective char. A variety of additives are available, ranging from the element itself, in the form of amorphous red phosphorus, to specialty organophosphorus compounds, and examples of their use in a range of thermoplastics are given. Intumescent formulations based on phosphates are especially designed for polyolefins. The behavior of a typical intumescent system is described with respect to flame retardant performance, thermal stability, water sensitivity, and filler compatibility.     

A polyamide-silica composite prepared by the sol-gel process

Summary A new kind of organic-inorganic hybrid composite was prepared by means of the sol-gel process. The polymer employed was a mixed-isomer aromatic polyamide having good solubility and thermal stability. The silica constituting the inorganic phase was produced by the hydrolysis and condensation of tetramethoxysilane. The bonding between the phases involved aminophenyl-trimethoxysilane, in which the amino group can react with the phthaloyl chloride end-capped polymer, and the methoxysilane groups undergo hydrolysis. The composition of these composites was varied by changing the linear polymer chain length and relative amount of tetramethoxysilane. The gelation time was found to range from a few minutes to several days. Thermogravimetric analyses showed that decomposition starts at approximately 450 °C. Thin films cast from materials having a relatively high silica content were opaque and rigid, but those with low silica content were flexible and transparent.