Van der Pauw measurement of metal fibre orientation in a plastic-metal composite

Stainless steel fibres in ABS plastic form a composite with an anisotropic resistivity. Samples are rectangular shapes with uniform thickness. By assuming two principal resistivities and by using van der Pauw's technique, we find ² = _{x y} . For rectangular samples, field theory determines _y / _x and hence fibre direction. Results for three sample geometries agree with the theoretical predictions of the fibre patterns and with X-ray data. Samples formed by a centre-sprue feed are the best for fabricating large, uniform samples, while samples with a large length-to-width ratio have the most uniform metal density and fibre orientation. Resistivity was also measured by the more-common two-probe technique. Results correlate well to van der Pauw data, with 95% confidence.     

High-temperature properties of the Bi-Sr-Ca-Cu-O system: Simultaneous occurrence of melting, oxygen desorption, and a metal-insulator transition

We have investigated the temperature dependence of the electrical transport and the thermogravimetric properties, from -200°C to +1000, of the Bi-Sr-Ca-Cu-O high-temperature superconductor. We conclude that this system has a cooperative, simultaneous-melting/oxygen desorption/metal-insulator transition that occurs near 900°C. We speculate on its nature and on its relationship to phenomena found in other high-T _c superconductors.     

Rapid software integration using structured methods

In this paper we discuss an approach to organizing the integration of 110,000 lines of C, SQL, Assembler, and microcode distributed over a network of 36 processors of four types so that it could be accomplished in six months. The software runs on a test system architecture consisting of a LAN-based workstation group and a set of VME-based embedded processors. By using structured methodology, parallelism in the integration process was achieved. The necessary stub tools were identified and developed before integration began. The principles followed and experiences of integrating the system are discussed.     

A boundary element method for two dimensional linear elastic fracture analysis

A boundary element method is developed for the analysis of fractures in two-dimensional solids. The solids are assumed to be linearly elastic and isotropic, and both bounded and unbounded domains are treated. The development of the boundary integral equations exploits (as usual) Somigliana's identity, but a special manipulation is carried out to regularize certain integrals associated with the crack line. The resulting integral equations consist of the conventional ordinary boundary terms and two additional terms which can be identified as a distribution of concentrated forces and a distribution of dislocations along each crack line. The strategy for establishing the integral equations is first outlined in terms of real variables, after which complex variable techniques are adopted for the detailed development. In the numerical implementation of the formulation, the ordinary boundary integrals are treated with standard boundary element techniques, while a novel numerical procedure is developed to treat the crack line integrals. The resulting numerical procedure is used to solve several sample problems for both embedded and surface-breaking cracks, and it is shown that the technique is both accurate and efficient. The utility of the method for simulating curvilinear crack propagation is also demonstrated.     

Galvanic corrosion over a semi-infinite, planar surface

We derive the governing equations for the galvanic coupling of two dissimilar materials in a planar surface wherein the transport phenomena in the liquid phase are controlled by ionic migration or diffusion. The problem statement corresponds to two semi-infinite materials located in the same plane and coupled along a single boundary, resulting in a two-dimensional analysis. A single dimensionless group arises in the analyses of the corrosion problems, which greatly simplifies the presentation of numerical results and subsequent implementation. An example application of this work is presented that demonstrates how the results can be used to set requirements for protective films (e.g., paint) utilized for reducing corrosion rates.     

Role of Macrophages and RhoA Pathway in Atherosclerosis

The development, progression, or stabilization of the atherosclerotic plaque depends on the pro-inflammatory and anti-inflammatory macrophages. The influx of the macrophages and the regulation of macrophage phenotype, inflammatory or anti-inflammatory, are controlled by the small GTPase RhoA and its downstream effectors. Therefore, macrophages and the components of the RhoA pathway are attractive targets for anti-atherosclerotic therapies, which would inhibit macrophage influx and inflammatory phenotype, maintain an anti-inflammatory environment, and promote tissue remodeling and repair. Here, we discuss the recent findings on the role of macrophages and RhoA pathway in the atherosclerotic plaque formation and resolution and the novel therapeutic approaches.     

An informationally complete Wigner function for the Tavis–Cummings model

Journal of Computational Electronics - Here we consider an informationally complete Wigner function approach to look at multiple atoms (qubits) coupled to a field mode. We consider the...     

Some aspects of the role of coal thermoplasticity and coke structure in coal gasification. 2. The effects of pressure and heating rate on dilatometric parameters and optical anisotropy development

An examination of the influence of pressure and heating rate on the thermoplastic properties of a weakly coking coal and of coal with various pitch-like additives was carried out using a high pressure dilatometer. Pressure up to 4 MPa markedly increased the swelling properties and increased the plastic range by decreasing the softening temperature, but the effects of pressure were strongly influenced by rate of heating with high heating rates enhancing the effects. Additions of tar or pitch also enhanced swelling at low pressure. The solid carbonization residues from the dilatometer were examined by polarized light microscopy to determine the content and composition of optically anisotropic species. The anisotropic content was increased by increases in pressure and heating rate and pitch additives enhanced the anisotropic content, especially at low pressure, without affecting the composition of the anisotropy. No direct correlations exist between the dilatometric parameters and the optical anisotropy but their dependence on the conditions emphasizes that when considering high pressure gasification of coal, it is necessary to obtain data under appropriate conditions.     

The role of adsorbate overlayers in thiophene hydrodesulfurization over molybdenum and rhenium single crystals

Thiophene hydrodesulfurization (HDS) has been investigated over model single crystal catalysts of molybdenum and rhenium. Thiophene HDS is a structure sensitive reaction over rhenium and a structure insensitive reaction over molybdenum. Adsorbed sulfur decreases the activity of both Re(0001) and Mo(100) surfaces while adsorbed carbon has distinctly different effects on the catalytic properties of the two metals. Carbon overlayers deactivate the Re(0001) surface but have no effect on the HDS activity of the Mo(100) surface. Radiotracer³⁵S and¹⁴C studies indicate that HDS occurs on an adsorbate overlayer on molybdenum comprised primarily of carbon. HDS over rhenium, on the other hand, occurs on the bare metal surface. This appears to be responsible for the observed differences in the influence of surface structure on HDS activity.     

Dynamics of fluid circulation in coupled free and heterogeneous porous domains

Fluid flow in coupled free and porous domain, particularly when the porous medium is heterogeneous, is encountered in many hydro-environmental conditions, e.g., leakage from underground pipe, combined groundwater lake-subsurface interactions. One of the most difficult problems in the study of coupled flow behaviour has been the development of a universally applicable modelling scheme for combining the flow regimes. This is because the free/porous interfacial properties (e.g., shear-stress; velocity slip) that govern the coupled flow behaviour are difficult to determine experimentally under hydro-environmental conditions. On the other hand, the implications of various forms of heterogeneity in the porous media properties can be very different on the fluid-flow behaviour. Difficulties may also arise in direct coupling of the model equations that govern the fluid flow in the individual regions (e.g., Navier-Stokes for free-flow region and the Darcy's equation for the porous flow region). Consequently, models of coupled free and porous flow for hydro-environmental conditions are not very well developed at the moment. While there are some indications that fluids in coupled free and porous domains may circulate (i.e., development of flow cells), there is a lack of appropriate 3D analysis on how heterogeneities in porous media may affect such flow patterns. In this paper, we aim to analyse how porous media heterogeneity affects the dynamics of flow circulation in the porous side of a coupled free and porous domain. For this purpose, we analyse flow patterns in several model domains made up of two porous layers with differing permeabilities. The governing model equations are discretised and solved using the standard finite volume method on a staggered cell-centred mesh. The temporal discretisation is done using the explicit method. An in-house graphical user interface (GUI) has been created specifically to aid in the visualisation of otherwise complex flow patterns. The GUI contains many post-processing options and provides a comprehensive tool for the analysis of hydrodynamics and contaminant motion (not discussed in this paper) in coupled free and porous flow domains. This GUI is described in this paper briefly. The effects of altering the aspect ratio (i.e., multi-scale) of the domain on the coupled flow pattern have also been discussed.