Detection of UF resin on wood particles and in particleboards: potential of selected methods for practice-oriented offline detection

In the wood-based panel industry, controlling the manufacturing process is crucial for ensuring product quality, using resources efficiently and cutting production costs. One major aspect for the final quality of particleboards is the distribution of resin on particles within a board. This study deals with the comparison of techniques that can be used for a practice-oriented detection of urea formaldehyde resin within an industrial environment. Resin detection was carried out by staining the resin with visible and fluorescent dyes as well as by near infrared spectroscopic (NIR) in combination with CHN elemental analysis. Using the fluorescent dye Brilliant Sulphaflavine, resin as well as single resin droplets could be detected best. NIR measurements did not lead to coherent results and should be further improved, especially because of its potential for online detection.     

Historical profiles of chlorinated paraffins and polychlorinated biphenyls in a dated sediment core from Lake Thun (Switzerland)

A dated sediment core from Lake Thun covering the last 120 years was analyzed to get an overview of the historical trend of the chlorinated paraffin (CP) and polychlorinated biphenyl (PCB) deposition, because CPs and PCBs have/had similar applications as plasticizers and flame retardants. Total CP concentrations (sum of short chain (SCCP), medium chain (MCCP), and long chain CPs (LCCP)) showed a steep increase in the 1980s and a more-or-less stable level of 50 ng g(-1) dry weight (dw) since then. The concentration-time profile is in good agreement with the available information on global production data. The quantification of higher chlorinated SCCPs using electron capture negative ionization low resolution mass spectrometry (ECNI-LRMS) revealed an increase in recent years. In addition, the degree of chlorination of SCCPs has strongly increased during the past 40 years, which may indicate its use as an additive for plastics, paints, and coatings. Furthermore, PCBs were analyzed in dated sediment slices. The PCB concentrations (sum of the six indicator congeners) peaked around 1969 (18 ng g(-1) dw) and decreased to 1.3 ng g(-1) dw in the surface layer corresponding to 2004. The peak level of CPs exceeded those of PCBs by about a factor of 3.     

Water footprint of European cars: potential impacts of water consumption along automobile life cycles

Due to global increase of freshwater scarcity, knowledge about water consumption in product life cycles is important. This study analyzes water consumption and the resulting impacts of Volkswagen's car models Polo, Golf, and Passat and represents the first application of impact-oriented water footprint methods on complex industrial products. Freshwater consumption throughout the cars' life cycles is allocated to material groups and assigned to countries according to import mix shares or location of production sites. Based on these regionalized water inventories, consequences for human health, ecosystems, and resources are determined by using recently developed impact assessment methods. Water consumption along the life cycles of the three cars ranges from 52 to 83 m(3)/car, of which more than 95% is consumed in the production phase, mainly resulting from producing iron, steel, precious metals, and polymers. Results show that water consumption takes place in 43 countries worldwide and that only 10% is consumed directly at Volkswagen's production sites. Although impacts on health tend to be dominated by water consumption in South Africa and Mozambique, resulting from the production of precious metals and aluminum, consequences for ecosystems and resources are mainly caused by water consumption of material production in Europe.     

Complex regulation of the aflatoxin biosynthesis gene cluster of Aspergillus flavus in relation to various combinations of water activity and temperature

A microarray analysis was performed to study the effect of varying combinations of water activity and temperature on the activation of aflatoxin biosynthesis genes in Aspergillus flavus grown on YES medium. Generally A. flavus showed expression of the aflatoxin biosynthetic genes at all parameter combinations tested. Certain combinations of a_w and temperature, especially combinations which imposed stress on the fungus resulted in a significant reduction of the growth rate. At these conditions induction of the whole aflatoxin biosynthesis gene cluster occurred, however the produced aflatoxin B₁ was low. At all other combinations (25 °C/0.95 and 0.99; 30 °C/0.95 and 0.99; 35 °C/0.95 and 0.99) a reduced basal level of cluster gene expression occurred. At these combinations a high growth rate was obtained as well as high aflatoxin production. When single genes were compared, two groups with different expression profiles in relation to water activity/temperature combinations occurred. These two groups were co-ordinately localized within the aflatoxin gene cluster. The ratio of aflR/aflJ expression was correlated with increased aflatoxin biosynthesis.     

Synergistic Processing of Skim Milk with High Pressure Nitrous Oxide,Heat, Nisin,and Lysozyme to Inactivate Vegetative and Spore-Forming Bacteria

Individual and combined effects of high pressure nitrous oxide (HPN₂O), heat, and antimicrobials on the inactivation of Escherichia coli, Listeria innocua, and Bacillus atrophaeus endospores in milk were all evaluated after 20-min treatments. Stand-alone milk treatments with HPN₂O (15.2 MPa), heat (45 and 65 °C), or nisin (50 and 150 IU mL^?1) resulted in log₁₀ reductions ranging only from 0.1 to 2.1 for E. coli and L. innocua. Combining HPN₂O (15.2 MPa) with heat (65 °C) inactivated 6.0 and 5.1 log₁₀ in the vegetative bacteria, respectively. Similarly, reductions of 5.9 and ≥ 6.0 log₁₀ of respective E. coli and L. innocua cells in milk were achieved through a combination of HPN₂O (15.2 MPa), heat (65 °C), and nisin (150 IU mL^?1). A 2.5 log₁₀ cycle inactivation of spores was obtained by HPN₂O, nisin (at both 50 and 150 IU mL^?1), and lysozyme (50 μg mL^?1) at 85 °C. Combining these processing techniques resulted in significantly greater microbial inactivation (p < 0.05) than the sum of individual reductions from each treatment alone, indicating synergistic effects. HPN₂O irrespective of processing temperatures did not cause any occurrence of sub-lethally injured cells or disruption in colloidal stability of milk at 65 and 85 °C (p ≥ 0.05). Color and pH changes in milk following the most demanding treatment conditions were minimal.     

A New Access to Piperidino-cyclopiperidinecarboxamides – constrained analogues of a pharmaceutical used diaminic building block

6-Piperidino-3-azabicyclo[3.1.0]hexane-6-carboxamide diastereomers 1a and 2a represent conformationally rigid analogues of 3a which is a building block in some pharmaceutical compounds. A new access to these compounds 1a and 2a was found via the cleavage of bicyclic N,N-acetal 6 with hydrocyanic acid as the stereodetermining step. Reaction of derivatives 1a and 2a with bromodiphenyl-butyronitrile 14 gave cyclopiritramide isomers 1c and 2c , respectively. Qualitative preliminary investigations showed different affinities of 1c and 2c to the opiate-μ receptor. These results were discussed on the basis of an X-ray structural analysis of cyclopiritramide isomer 2c . 1-Benzylcyclopiperidine derivatives 1d and 2d were used as model systems for studying the conformation of cyclopiritramide isomer 1c and 2c , respectively.     

Immune Checkpoint Blockade in Advanced Cutaneous Squamous Cell Carcinoma: What Do We Currently Know in 2020?

Cutaneous squamous cell carcinoma (cSCC) is the second most common skin cancer that predominantly arises in chronically sun-damaged skin. Immunosuppression, genetic disorders such as xeroderma pigmentosum (XP), exposure to certain drugs and environmental noxae have been identified as major risk factors. Surgical removal of cSCC is the therapy of choice and mostly curative in early stages. However, a minority of patients develop locally advanced tumors or distant metastases that are still challenging to treat. Immune checkpoint blockade (ICB) targeting CTLA-4, PD-L1 and PD-1 has tremendously changed the field of oncological therapy and especially the treatment of skin cancers as tumors with a high mutational burden. In this review, we focus on the differences between cSCC and cutaneous melanoma (CM) and their implications on therapy, summarize the current evidence on ICB for the treatment of advanced cSCC and discuss the chances and pitfalls of this therapy option for this cancer entity. Furthermore, we focus on special subgroups of interest such as organ transplant recipients, patients with hematologic malignancies, XP and field cancerization.