Degradation of Stiffness of Cemented Calcareous Soil in Cyclic Triaxial Tests

The deformation characteristics of artificially cemented calcareous soil subjected to undrained cyclic triaxial loading are investigated at different confining pressure and cyclic stress levels. The influence of cementation on the shear stiffness is investigated by comparing the behavior of cemented and uncemented soils with similar initial conditions. It is observed that the deviator stress and the deviatoric strain at yield reduced with increasing number of cycles for cemented sand due to progressive degradation of bond, which results in significant decrease in stiffness. On the other hand, a strain-hardening effect is observed in uncemented sand and this results in increasing yield stress and strain with progressive number of cycles. A linear relationship between degradation index and number of cycles is observed for cemented sand. This relationship has been synthesized in the form of an empirical equation by modifying a previously proposed equation for cohesive soils. This empirical equation was further used to evaluate the fatigue life of soils by adopting a failure criterion.     

Extracting electrical material parameters of electrically large dielectric objects from reverberation chamber measurements of absorption cross section

Reverberation chambers can be used to measure the absorption cross section of a dielectric object. The absorption cross section of a dielectric object depends on its size, shape, and electrical material parameters. By comparing with a theoretical model of the absorption cross section, material parameters can be extracted from measurements. A model based on a plane wave approach of incident fields is used here, valid for electrically large material samples in an isotropic environment such as that in a reverberation chamber. Which material parameter can be extracted depends on the properties of the material sample. The presented method combines the accuracy of cavity methods with the flexibility of being able to measure samples of arbitrary size and shape. Because both the reverberation chamber and the material sample are electrically large, the method is particularly useful at millimeter-wave frequencies.     

Failure of a stationary pump engine piston

Piston failures are not a common occurrence, but they do occur, and failure is usually associated with fatigue crack growth. Most failures initiate at the gudgeon pin hole or in the skirt of the piston. Occasionally they fail elsewhere. In the example covered in this paper, failure initiated in the crown and progressed down to the gudgeon pin before final failure occurred. This paper outlines the cause and mode of failure and shows that small metallurgical discontinuities can contribute to these failures under the right circumstances.     

Delamination Resistant Zinc Alloys: Simple Concept and Results on the System Zinc‐Magnesium

Alloying zinc coatings with elements such as magnesium and titanium increases the corrosion resistance in industrial tests. Based on the fundamental mechanism of cathodic delamination, a simple concept how alloying zinc with specific elements might improve its resistance to cathodic delamination is presented in this paper. As an example, results concerning the delamination of a simple polymer from the zinc‐magnesium intermetallic MgZn₂ are presented. From electrode potential measurements obtained with the Scanning Kelvin Probe it can be concluded that cathodic delamination from this alloy is completely inhibited. This behaviour is attributed to the electronic properties of the magnesium‐rich oxidic passive layer, that inhibits the oxygen reduction reaction at the metal oxide/polymer interface.     

Crystallization of Polymer-Derived Silicon Carbonitride at 1873 K under Nitrogen Overpressure

The chemical stability of an amorphous silicon carbonitride ceramic, having the composition 0.57SiC·0.43Si₃N₄·0.49C is studied as a function of nitrogen overpressure at 1873 K. The ceramic suffers a weight loss at p _N2 < 3.5 bar (1 bar = 100 kPa), does not show a weight change from 3.5 to 11 bar, and gains weight above 11 bar. The structure of the ceramic changes with pressure: it is crystalline from 1 to 6 bar, amorphous at ∼10 bar, and is crystalline above ∼10 bar. The weight-loss transition, at 3.5 bar, is in excellent agreement with the prediction from thermodynamic analysis when the activities of carbon, SiC, and Si₃N₄ are set equal to those of the crystalline forms; this implies that the material crystallizes before decomposition. The amorphous to crystalline transition that occurs at ∼10 bar, and which is accompanied by weight gain, is likely to have taken place by a different mechanism. A nucleation and growth reaction with the atmospheric nitrogen is proposed as the likely mechanism. The supersaturation required to nucleate α-Si₃N₄ crystals is calculated to be 30 kJ/mol.     

Endoscopic study of the small intestine with push enteroscopy. A prospective study

OBJECTIVE: To evaluate whether push enteroscopy of the small bowel (PES), undertaken after extensive previous investigations in suspected intestinal bleeding from an uncertain site, chronic diarrhoea or lymphoma of the small intestine, contributes to the diagnosis, and to ascertain the results of PES and its clinical significance. PATIENTS AND METHODS: 56 consecutive patients (29 men, 27 women; mean age 63 years) were investigated prospectively. The main indications for PES were the search for the source of intestinal bleeding in 79% of patients (group A), chronic diarrhoea or tropical sprue in 16% (group B) and search for tumour of lymphoma in 5% (group C). PES was always performed in fasting patients under sedation/analgesia using a video PES, which contrary to catheter enteroscopy provides a channel for intervention. RESULTS: In group A 27% of patients were found to have lesions, in particular angiodysplasias, or (in once case) leiomyoma. Half of these patients were successfully treated endoscopically without later surgical intervention being required (mean follow-up of six months). In the other half operation became necessary, either because the disease itself indicated it or the bleeding persisted, the source being in the more distant small intestine and thus not accessible to endoscopic intervention: only 50% of the length of the small intestine proved to be within reach of the instrument. No abnormalities were discovered in patients of groups B and C. CONCLUSION: In cases of gastrointestinal bleeding from an uncertain source PES should be performed first, because in many cases it may obviate surgical intervention. But PES seems to contribute little of diagnostic value in other indications.     

Influence of body segment dynamics on loads at the lumbar spine during lifting.

Flexion-extension moments acting at the L5/S1 level and hip joints were calculated using three different techniques; a pure static analysis, a static analysis including the inertial force of the load, and a dynamic analysis. Ten subjects participated in the study and were asked to lift a box weighing either 50 N or 150 N, using a freestyle technique. The lifts were performed at normal and fast speed. The intra-subject lifting techniques were consistent when lifting the same loads. The moments predicted by the dynamic analysis and the static analysis were the same when holding weights in static postures. When performing the lifts, differences in the peak moments occurred between static and dynamic analyses. These differences were influenced by external load and by lifting speed. Taking the effect of the inertia of load into account in the static analysis resulted in an increase in the moment magnitude, but the predicted moment was still much less than in the dynamic analysis which yielded the largest moment magnitudes. The difference between dynamic and static analysis was greatest when lifting 50 N at fast speed; an 87% increase in L5/S1 moment and a 95% increase in hip moment was observed when replacing the pure static with a dynamic analysis.     

Radiale Wärmeleitung in durchströmten Schüttungsrohren

Heat Transport to the Wall of Packed Tubes. Radial conduction of heat in packed tubes has a crucial influence on yield and selectivity of many heterogeneously catalyzed reactions. In spite of many years of intensive research in the field, there are still tremendous discrepancies between correlations of different origin. Even the standard model using two constant heat transport parameters, which was introduced in the fifties and has since become most widely accepted, has been controversially discussed and called into question. The unsatisfactory state of the art has been an incentive for several groups of researchers to take up this old topic once again. Three parallel experimental investigations on heat transport with air flowing in packed tubes of similar dimensions, electrically heated, steam-heated, or water-cooled, were completed in 1991. Comparative evaluation of the results of these three investigations, together with other data from the relevant literature, now provides the first clear answers to some of the questions so controversially discussed in the past.