Domain-wall superconductivity in superconductor-ferromagnet hybrids

Superconductivity and magnetism are two antagonistic cooperative phenomena, and the intriguing problem of their coexistence has been studied for several decades. Recently, artificial hybrid superconductor-ferromagnet systems have been commonly used as model systems to reveal the interplay between competing superconducting and magnetic order parameters, and to verify the existence of new physical phenomena, including the predicted domain-wall superconductivity (DWS). Here we report the experimental observation of DWS in superconductor-ferromagnet hybrids using a niobium film on a BaFe(12)O(19) single crystal. We found that the critical temperature T(c) of the superconductivity nucleation in niobium increases with increasing field until it reaches the saturation field of BaFe(12)O(19). In accordance with the field-shift of the maximum value of T(c), pronounced hysteresis effects have been found in resistive transitions. We argue that the compensation of the applied field by the stray fields of the magnetic domains as well as the change in the domain structure is responsible for the appearance of the DWS and the coexistence of superconductivity and magnetism in the superconductor-ferromagnet hybrids.     

Template synthesis of gold nanotubes in an anodic alumina membrane

Nanotube-containing membranes prepared by the template method show promise for use as highly selective filters for membrane-based chemical and biological separations. Most of the work to date has been done on gold nanotubes prepared by electroless deposition of Au within the pores of polymeric filtration membranes. These polymeric filters have very low porosities (< 1%), and, as a result, the flux through Au nanotube membranes based on these templates is very low. In contrast, the other popular template membranes-anodic aluminas-have high porosities-30% to 50%. In spite of this potential advantage of anodic alumina templates, there have been no reports of electrolessly plated Au nanotubes within the pores of these templates. This is because the electroless plating method used to deposit Au nanotubes in polymeric templates does not work in aluminas. We have developed a modified electroless plating strategy that can be used to deposit high-quality Au nanotubes within the pores of the alumina templates. We describe this new plating method here.     

Atmospheric deposition of polycyclic aromatic hydrocarbons to Atlantic Canada: geographic and temporal distributions and trends 1980-2001

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental contaminants. The semivolatile organic compounds may disperse into the atmosphere by direct input from several sources such as the burning of fossil fuels, from motor vehicle emissions, and forest fires. Once in the atmosphere, they may travel great distances before being deposited to the earth's surface by the scavenging action of rain and snow. Up to 14 PAHs were determined in wet precipitation samples collected monthly from five sites in the four Canadian Atlantic Provinces during 1980-2001. The relatively more volatile PAHs (phenanthrene, fluoranthene, naphthalene, and pyrene) were predominant in the samples. Significant (P < 0.05) spatial variations in the deposition of some PAHs were observed among sites, but there were no consistent geographic patterns. Seasonal patterns were discernible with peak deposition for sigma6&14 PAHs occurring during the colder months of the year (December to March) and coinciding with higher energy consumption for heating and transport. The monthly volume weighed mean concentration for sigma6 PAHs has declined steadily since the mid-1980s at Kejimkujik National Park in southwest Nova Scotia, with a calculated half-life of 6.4 +/- 0.3 years. The maximum annual deposition flux of 20 microg m(-2) yr(-1) reached in 1985 for sigma6 PAHs decreased approximately 1 order of magnitude by the year 2000. The decrease in sigma6&14 PAHs for the region was found to be correlated (P < 0.05) with decreasing sulfate ion concentrations in the precipitation. The implementation of air pollution abatement programs in Canada, the United States, and elsewhere, switching to cleaner sources of energy and improved technology during the pastfew decades is most likely responsible for the observed decline.     

Compensation of the exhaust gas transport dynamics for accurate instantaneous emission measurements

Instantaneous emission models of vehicles describe the amount of emitted pollutants as a function of the driving state of the car. Emission measurements of chassis dynamometer tests with high time resolution are necessary for the development of such models. However, the dynamics of gas transport in both the exhaust system of the car and the measurement line last significantly longer than 1 s. In a simplified approach, the transport dynamics can be divided into two parts: a perfect time delay, corresponding to a piston-like transport of the exhaust gas, and a dynamic part, corresponding to the mixing of gases by turbulence along the way. This determines the occurrence of emission peaks that are longer in time and lower in height at the analyzer than they actually are in the vehicle at their location of formation. It is shown here how the sharp emission signals at their location of formation can be reconstructed from the flattened emission signals recorded at the analyzer by using signal theory approaches. A comparison between the reconstructions quality when using the raw or the dilution analyzer system is also given.     

Changes of physicochemical indicators during mastitis and the effects of milk ejection on their sensitivity

We examined the relationship between physicochemical indicators and somatic cells in the milk of dairy cows during experimentally induced mastitis and their significance as indicators for use in controlling udder health. We were concerned particularly with the effect of alveolar milk ejection on the sensitivity of these indicators. In Expt 1, Escherichia coli lipopolysaccharide (Esch. coli LPS) was injected into the left rear quarter to induce an inflammatory reaction in one quarter in each of six cows. The contralateral control quarter was injected with a solution of NaCl (9 g/l). Nine milk samples were taken from both quarters until 60 h after injection. In Expt 2, repeated milk samples were taken every 20 s from one quarter during a 120-s teat stimulation in 20 cows with different somatic cell counts (SCC). Quarters were clustered for low (<5.0 log cells/ml), mid (5.0-5.7 log cells/ml) and high (>5.7 log cells/ml) SCC of the sample taken at t=0 s. Samples were analysed for SCC, electrical conductivity (EC) and Na+ and Cl- concentrations. During the experimental inflammation SCC, EC, Na+ and Cl- peaked at 12 h from LPS administration and values in treated quarters (T) at this time were elevated to 7900, 157, 501 and 169% of the values in untreated quarters, respectively. In Expt 2, SCC, EC, Na+ and Cl- in high SCC quarters were 2520, 121, 283 and 141% of low SCC quarters at the start of stimulation (t=0 s), respectively. Highly significant (P<0.001) differences in EC, Na+ and Cl- between high and low SCC quarters disappeared owing to the onset of alveolar milk ejection 100 s after the first contact with the teat. In conclusion, SCC in cows' milk provided the strongest amplitude in the case of an intramammary inflammation. EC, Na+ or Cl- were useful tools only if the measurements were performed in cisternal milk before the start of alveolar milk ejection.     

The effects of an edgeline on speed and lateral position: a meta-analysis

This paper presents a meta-analysis of studies that have evaluated the effects of an edgeline on speed and lateral position of motorised road users. Together with many other study characteristics, 41 estimates of the effects of an edgeline on speed and 65 on lateral position were extracted from the studies. The results of the evaluation studies show a great variety in effects. Both negative and positive effects on speed and lateral position were found; amongst others, increases in speed up to 10.6 km/h, as well as decreases in speed up to 5.0 km/h, and shifts of the lateral position towards the centre of the road up to 30 cm, as well as shifts towards the edge of the road up to 35 cm. Further analyses resulted in the determination of study characteristics that influence the effects of an edgeline on speed and lateral position. It is concluded that the effects of an edgeline on speed are related to the presence of a centreline. Applying an edgeline to a road without a centreline increases the speed of road users, and replacing a centreline by an edgeline decreases the speed. Results with respect to adding an edgeline to a road with a centreline were unclear. Another conclusion is that shoulder width and road environment contribute to the effects of an edgeline on lateral position. In combination with wide shoulders or buildings and/or trees next to the road, edgelines lead to shifts of the lateral position towards the edge of the road, and in combination with narrow shoulders or open fields, edgelines lead to shifts towards the centre of the road.     

Deformation-induced release of ATP from erythrocytes in a poly(dimethylsiloxane)-based microchip with channels that mimic resistance vessels

The ability of nitric oxide to relax smooth muscle cells surrounding resistance vessels in vivo is well documented. Here, we describe a series of studies designed to quantify amounts of adenosine triphosphate (ATP), a known stimulus of NO production in endothelial cells, released from erythrocytes that are mechanically deformed as these cells traverse microbore channels in lithographically patterned microchips. Results indicate that micromolar amounts of ATP are released from erythrocytes flowing through channels having cross sectional dimensions of 60 x 38 micron (2.22 +/- 0.50 microM ATP). Microscopic images indicate that erythrocytes, when being pumped through the microchip channels, migrate toward the center of the channels, leaving a cell-free or skimming layer at the walls of the channel, a profile known to exist in circulatory vessels in vivo. A comparison of the amounts of ATP released from RBCs mechanically deformed in microbore tubing (2.54 +/- 0.15 microM) vs a microchip (2.59 +/- 0.32 microM) suggests that channels in microchips may serve as functional biomimics of the microvasculature. Control studies involving diamide, a membrane-stiffening agent, suggest that the RBC-derived ATP is not due to cell lysis but rather physical deformation.     

Selective detection and identification of sugar nucleotides by CE-electrospray-MS and its application to bacterial metabolomics

A novel method employing CE-ESMS and precursor ion scanning was developed for the selective detection of nucleotide-activated sugars. By using precursor ion scanning for fragment ions specific to the different nucleotide carriers, i.e., ions at m/z 322 for cytidine monophosphate, m/z 323, 385, and 403 for uridine diphosphate, m/z 362, 424, and 442, for guanosine diphosphate, and m/z 346, 408, and 426 for adenosine diphosphate, it was possible to selectively detect sugar nucleotides involved in the biosynthesis of glycoconjugates such as glycoproteins and lipopolysaccharides. Enhancement of sensitivity was achieved using N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) as a sample stacking buffer and provided detection limits between 0.2 and 3.8 pmol.mL(-)(1). The present CE-ESMS method provided linear dynamic ranges over the concentrations 0.2-164 nM (r(2) = 0.952-0.997) for different nucleotide sugar standards. The application of this method is demonstrated for the identification of intracellular pools of sugar nucleotides in wild type and isogenic mutants from the bacterial pathogen Campylobacter jejuni. By using product ion scanning (with and without front-end collision-induced dissociation), it was possible to determine the precise nature of unexpected sugar nucleotides involved in the biosynthesis of pseudaminic acid, a sialic acid-like sugar previously observed on the flagellin of some pathogenic bacteria.