Volumetric quantification of atherosclerotic plaque in CT considering partial volume effect

Coronary artery calcification (CAC) is quantified based on a computed tomography (CT) scan image. A calcified region is identified. Modified expectation maximization (MEM) of a statistical model for the calcified and background material is used to estimate the partial calcium content of the voxels. The algorithm limits the region over which MEM is performed. By using MEM, the statistical properties of the model are iteratively updated based on the calculated resultant calcium distribution from the previous iteration. The estimated statistical properties are used to generate a map of the partial calcium content in the calcified region. The volume of calcium in the calcified region is determined based on the map. The experimental results on a cardiac phantom, scanned 90 times using 15 different protocols, demonstrate that the proposed method is less sensitive to partial volume effect and noise, with average error of 9.5% (standard deviation (SD) of 5-7mm(3)) compared with 67% (SD of 3-20mm(3)) for conventional techniques. The high reproducibility of the proposed method for 35 patients, scanned twice using the same protocol at a minimum interval of 10 min, shows that the method provides 2-3 times lower interscan variation than conventional techniques.     

A flexible,reliable, and adaptive timeslot‐based advance bandwidth‐reservation mechanism for media delivery services

Media‐centric networks deal with exchanging large media files between geographical distributed locations with strict deadlines. In such networks, resources need to be available at predetermined timeslots in the future and thus need to be reserved in advance, based on either flexible or fixed timeslot sizes. Reliability of the transfers is also important and can be attained by advance provisioning of redundant reservations. This, however, imposes additional costs, because redundant reservations are rarely in use, causing network resources to be wasted. Further adaptation and network utilization can be achieved at runtime by reutilizing unused reservations for transferring extra data as long as no failure has been detected. In this article, we design, implement, and evaluate a resilient advance bandwidth‐reservation approach based on flexible timeslots, in combination with a runtime adaptation approach. We take into account the specific characteristics of media transfers. Quality and complexity of the proposed approach have been extensively compared with that of a fixed timeslot algorithm. Our simulation results reveal that the highest admittance ratio and percentage of fully transferred requests in case of failures are almost always achieved by flexible timeslots, while the execution time of this approach is up to 17.5 times lower, compared with the approaches with fixed timeslot sizes.     

An Adaptable and Scalable Generator of Distributed Massive MIMO Baseband Processing Systems

Journal of Signal Processing Systems - This paper presents an algorithm-adaptable, scalable, and platform-portable generator for massive multiple-input multiple-output (MIMO) baseband processing...     

On the formulation design and rheological evaluations of pectin-based functional gels

In the current study, formulation design and development of a novel pectin-based functional gel were investigated. Amidated low methoxyl pectin (ALMP), high methoxyl pectin (HMP), sorbitol, inulin, rebaudioside-A, gardenia, phloridzin, quercetin, apple flavor, and calcium chloride (as its dihydrated salt) were selected as general ingredients. Response surface methodology was applied to design different formulations and to investigate on their experimental responses. The oscillatory tests were carried out in 2 stages with ALMP, HMP, sorbitol, and inulin as the variables of the 1st stage and ALMP and calcium chloride as the variables of the 2nd stage. Results of the 1st stage indicated relatively similar behaviors throughout the frequency range applied for all of the samples studied (true gels). However, magnitudes of the 5 rheological parameters of this study (storage modulus, loss modulus, loss tangent, complex modulus, and complex viscosity) were affected by different variables (ALMP, HMP, inulin, and sorbitol concentrations). Experimental results confirmed that sorbitol could be omitted from the formula while inulin and HMP could be used at their highest levels studied. At the 2nd stage, only 2 formulas indicated a strong gel behavior and other formulas showed typical behaviors of weaker gels or those of the concentrated solutions. At the conclusion of this study, a finished gelled product formula was suggested with the application of the best levels of the ingredients. The resultant gel was found to be set rapidly with no syneresis and showed a potential to be considered as a functional gelled dessert.     

Nutrition education alone improves dietary practices but not hematologic indices of adolescent girls in Iran

BACKGROUND: Iron-deficiency anemia is the most prevalent nutritional deficiency worldwide. Iron-deficiency anemia has particular negative consequences on women in their childbearing years, and its prevention is a high priority in most health systems. OBJECTIVE: This interventional study assessed the effect of nutrition education on hematologic indices, iron status, nutritional knowledge, and nutritional practices of high-school girls in Iran. METHODS: Sixty healthy 16- to 18-year-old girls were randomly selected from two high schools in the city of Ahvaz and divided into two equally matched groups, one that received nutrition education, and one that did not. The education group received instruction in face-to-face sessions, group discussions, and pamphlets for 2 months. The control group did not receive any information during the study. Hematologic tests, corpuscular indices, and serum ferritin levels were measured at baseline and after 2 months. Food-frequency questionnaires were administered and histories taken, clinical signs of nutritional deficiencies observed, anthropometric measurements taken, nutritional knowledge tested, practices determined, and lifestyle questionnaires administered to all subjects. RESULTS: There were no statistically significant differences in any baseline characteristics between the two groups. Scores for nutritional knowledge and practices of the education group were significantly higher after two months compared with the baseline (31.4 +/- 6 vs. 24.3 +/- 5.9 points, p < .001, and 31.2 +/- 5 vs. 28.4 +/- 5.7 points, p < .05, respectively). The scores in the control group showed no significant changes from baseline to 2 months. Mean corpuscular volume values were elevated in the education group (p < .001) but not in the control group. However, in the control group, serum ferritin concentrations showed about a 17% drop at the end of the study (p < .004). There were no changes in other hematologic, lifestyle, clinical, or anthropometric data compared with baseline after completion of the study in both groups. CONCLUSION: These findings indicate that nutritional education can improve knowledge of healthy nutrition and lifestyle choices. Focused nutritional education using available resources and correcting current dietary habits in a vulnerable group of young women may result in dietary changes that can ultimately improve iron intake.     

Rheological and thermal properties of an enteral nutrition formula for nutritional support patients using a combined mixture of gelatin and maltodextrin

Enteral nutrition is a type of nutritional support that provides the necessary sources of energy and protein for patients who suffer from dysphagia, chronic disease, and loss of appetite. In this study, a gelatin-maltodextrin binary biopolymer system has been incorporated into a semi-solid formula. The I-optimal combination design approach was used to create 19 formulations, and the dynamic rheological properties, dynamic laser scattering, and zeta potential responses were evaluated over 30 days of storage at 5°C. Solid viscoelastic behavior has been approved since G′ > G″ in the frequency sweep test with no cross-over point. Maltodextrin may interfere within the gelatin network, and increasing the maltodextrin to gelatin (from 0.14 to 1) may lead to a wider linear viscoelastic (LVE) strain range (2.16%), a lower storage modulus at LVE (52%), a lower yield stress (46%), and a lower glass transition temperature (34%). The presence of maltodextrin may reduce the temperature of the sol-to-solid transformation by 48% and enhance its flexibility. In contrast, increasing the gelatin-to-maltodextrin ratio following melting at 37°C led to an increase in the cumulant mean and polydispersity index, indicating a relatively unstable system. The range of zeta potential values between −4.4 and 1.7 mV confirmed a tendency toward coagulation. Microscopic images revealed instability because of irregular or compact chains formed in the gelatin matrix by using higher amounts of maltodextrin. Finally, the best formula had the best rheological stability and was suitable for tube-feeding patients, with a gelatin-to-maltodextrin ratio of 4.35:3.64% w/w on day 17.4.     

Prevalence and antimicrobial resistance of Salmonella recovered from processed poultry

This study was conducted to determine the prevalence and antimicrobial resistance of Salmonella isolates recovered from processed poultry. Four hundred eighty pre- and postchill whole broiler chicken carcasses were collected from a poultry processing plant between July 2004 and June 2005. Water samples also were collected at the entrance and exit of the chiller. After preenrichment, carcass and water samples were analyzed for the presence of Salmonella using the automated BAX system followed by traditional culture methods. The proportions of pre- and postchill carcasses that were positive for Salmonella were 88.4 and 84.1%, respectively. Ninety-two percent of water samples collected at the entrance of the chiller were positive for Salmonella, but all exit samples were negative. There was no significant difference in the prevalence of Salmonella between pre- and postchill carcasses (P > 0.05). Salmonella isolates recovered were serotyped and tested for susceptibility to antimicrobials. Thirteen serotypes were identified; the most common were Salmonella Kentucky (59.5%) and Salmonella Typhimurium (17.8%). Three hundred thirty-nine (79.8%) of the isolates were resistant to at least one antimicrobial, and 53.4% were resistant to three or more antimicrobials. Resistance was most often observed to tetracycline (73.4% of isolates), ampicillin (52.9%), amoxicillin-clavulanic acid (52%), ceftiofur (51.7%), streptomycin (35.2%), and sulfisoxazole (21.8%). These results indicate the high prevalence of Salmonella contamination in whole broiler carcasses, and a large number of these Salmonella isolates were resistant to commonly used antimicrobials.     

Melt Production and Antimicrobial Efficiency of Low-Density Polyethylene (LDPE)-Silver Nanocomposite Film

Colloidal silver nanoparticles with a size of 5.5 ± 1.1 nm were prepared by chemical reduction using polyethylene glycol (PEG). Silver nanoparticles were incorporated into low-density polyethylene (LDPE) by melt blending and subsequent hot pressing at 140 °C to produce nanocomposite film with an average thickness of 0.7 mm. PEG was added at 5% weight of polymer as a compatibilizer agent in order to prevent agglomeration and provide uniform distribution of nanoparticles in polymer matrix. Antimicrobial activity of silver nanocomposites against Escherichia coli ATCC 13706, Staphylococcus aureus ATCC12600, and Candida albicans ATCC10231 was evaluated by semi-qualitative agar diffusion test and quantitative dynamic shake flask test. Mechanical properties of nanocomposites were not significantly different from silver-free LDPE-containing PEG films (p > 0.05), and silver nanoparticles did not form chemical bonding with the polymer. LDPE-silver nanocomposite samples by more than 6.69 ppm silver nanoparticles showed considerable antimicrobial clear zone. LDPE-silver nanocomposite affected growth kinetic parameters of the examined bacteria and is more efficient on S. aureus than E. coli. Polyethylene-silver nanocomposites containing 22.64 ppm silver nanoparticles could reduce 57.8% growth rate and 23.3% maximum bacterial concentration and increase 35.8% lag time of S. aureus. This study shows the potential use of LDPE-silver nanocomposite as antimicrobial active film. Antimicrobial efficiency of silver nanocomposite depends on silver nanoparticles concentration; however, high level of silver nanoparticles may lead to weakening of mechanical properties.