A comparative study of ethylene polymerization by bis(aminotropone) Ti catalysts

A series of titanium aminotropone complexes bearing a pair of chelating [O–N] ligands have been synthesized and used for polymerization of ethylene successfully. Ethylene polymerization reactions were carried out at different conditions using the prepared catalysts. The activities for ethylene polymerization were significantly dependent on the catalyst structure. The polymerization activity increased with increasing of the both monomer pressure and [MAO]:[Ti] ratio. The highest activity of the catalysts was obtained at about 30–40 °C. It was demonstrated that unlike the high performance Ti–FI catalysts, bis(aminotropone) Ti catalysts do not require the presence of steric bulk in close proximity to the oxygen moiety. Introduction of the bulky alkyl substitution next to the oxygen moiety decreased the activity of the catalysts. Density Functional Theory (DFT) studies reveal that the active species derived from these catalysts normally possess higher electrophilicity nature compared with those produced using bis(phenoxy-imine) Ti catalysts (Ti–FI catalysts). Hydrogen was used as the chain transfer agent. The activities of the catalysts were increased with hydrogen concentration to some extent, but the M _v values of the obtained polymers were decreased. Crystallinity and melting point of the obtained polymer were between 42–62% and 102–124 °C, respectively. Higher pressure increased both the crystallinity and the M _v values of the resulting polymers. The catalyst 8a also produced PE with almost narrow polydispersities (1.10–2.55) as is typical for single-site catalysts. However, PDI was broadened by time.     

CuI Immobilized on Tricationic Ionic Liquid Anchored on Functionalized Magnetic Hydrotalcite (Fe3O4/HT-TIL-CuI) as a Novel,Magnetic and Efficient Nanocatalyst for Ullmann-Type C–N Coupling Reaction

One of the most important reactions in organic synthesis is Ullmann-type C–N coupling reaction which has been used for preparation of numerous biologically active compounds. In this work, CuI immobilized on tricationic ionic liquid anchored on functionalized magnetic hydrotalcite (Fe₃O₄/HT-TIL-CuI) has been successfully prepared and fully characterized by different techniques, including fourier-transform infrared spectroscopy, vibrating sample magnetometer, thermo gravimetric analysis, transmission electron microscopy, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, elemental mapping, zeta potential, X-ray diffraction, temperature programmed desorption of ammonia (NH₃-TPD), temperature-programmed reduction and inductively coupled plasma. The results showed that the as-prepared nanocatalyst possesses plate-like morphology with approximate size of 50 nm and superparamagnetic behavior. Also, total acidity and total hydrogen consumption of the nanocatalyst were measured to be 8.5 and 1.41 mmol g^?1, respectively. This nanocatalyst exhibited favorable performance for C–N coupling reaction among a variety of aryl halides and N(H)-heterocycles (benzimidazoles, pyrazoles and triazoles) in the presence of 2.5 mol% of nanocatalyst without any additives under air atmosphere revealing high yields in all cases. Besides, it is noted that in the present system the desired product can be easily and quickly isolated and nanocatalyst also recovered magnetically from the reaction mixture employing a permanent magnet for at least six consecutive trials without a discernible decrease in catalytic activity which makes the proposed methodology appropriate for industrial. The findings demonstrated the advantages of the present method as no need for neutral atmosphere, appropriate times, recyclability of the catalyst, broad substrate scope, minimization of chemical waste, simple purification of products, easy workup process, and high yields.

     

Hybrid Paper–Plastic Microchip for Flexible and High‐Performance Point‐of‐Care Diagnostics

A low‐cost and easy‐to‐fabricate microchip remains a key challenge for the development of true point‐of‐care (POC) diagnostics. Cellulose paper and plastic are thin, light, flexible, and abundant raw materials, which make them excellent substrates for mass production of POC devices. Herein, a hybrid paper–plastic microchip (PPMC) is developed, which can be used for both single and multiplexed detection of different targets, providing flexibility in the design and fabrication of the microchip. The developed PPMC with printed electronics is evaluated for sensitive and reliable detection of a broad range of targets, such as liver and colon cancer protein biomarkers, intact Zika virus, and human papillomavirus nucleic acid amplicons. The presented approach allows a highly specific detection of the tested targets with detection limits as low as 10² ng mL^?1 for protein biomarkers, 10³ particle per milliliter for virus particles, and 10² copies per microliter for a target nucleic acid. This approach can potentially be considered for the development of inexpensive and stable POC microchip diagnostics and is suitable for the detection of a wide range of microbial infections and cancer biomarkers.     

Effectiveness of pressurised carbon dioxide for inactivation of Escherichia coli isolated from sewage sludge

This research explored the possible application of pressurised carbon dioxide (P CO(2)), a promising non-thermal sterilisation technique, for the treatment of sewage sludge (SS) before anaerobic digestion to inactivate pathogenic microorganisms. Escherichia coli was selected as the test organism and was isolated from SS and maintained in pure culture. The growth curve of the isolated strain was determined by measuring the optical density (OD) in liquid culture medium and relating this information to the spread plate count so that a culture of known cell density could be grown for optimisation experiments. Inactivation of E. coli was enhanced by increase in pressure (1,500, 2,000 and 2,800 kPa) and treatment time (from 0.75 to 24 h). A short exposure time at high pressure was sufficient to provide a degree of inactivation which could also be achieved by longer exposure at lower pressure. Complete inactivation (8 log(10) reduction) was possible at all three pressures. scanning (SEM) and transmission (TEM) electron microscopy studies of E. coli treated with P CO(2) revealed that the cell walls were ruptured, and the cytoplasm was unevenly distributed and had lost its density, indicating the possible leakage of intracellular substances.     

Poly(DL-lactide-co-ε-caprolactone) and poly(DL-lactide-co-glycolide) blends for biomedical application: Physical properties,cell compatibility,and in vitro degradation behavior

Poly(DL-lactide-co-ε-caprolactone) (PLCL) and poly(DL-lactide-co-glycolide) (PLGA) blends of various compositions were prepared. Fractured sections of PLCL/PLGA blends did not evidence phase separation and blend glass transition temperatures suggested some degree of blend compatibility. The elastic modulus showed a negative deviation from the additive law of mixture. Superior biocompatibility in terms of fibroblast NIH 3T3 cell adhesion and proliferation, better mechanical properties, and a more homogeneous phase were obtained with PLCL/PLGA 25/75 blend. Rapid degradation of PLCL phase (4–8 weeks) in PLCL/PLGA 25/75 blend led to a porous structure, which makes it a potential candidate for drug delivery systems.     

Electrooxidation of formaldehyde as a fuel for fuel cells using Fe2+-nano-zeolite modified carbon paste electrode

This study aimed to investigate the application of nano ZSM-5 zeolite for preparation of modified carbone paste electrode for electrocatalytic oxidation of formaldehyde. The electrochemical behavior of modified carbon paste electrodes in the forms of Fe/FeZSM-5CPE and unmodified carbon paste electrode were studied using cyclic voltammetric and chronoamprometric techniques. The obtained results show that the modified carbon paste electrode (Fe/FeZSM-5CPE) is the suitable electrode for electrooxidation of formaldehyde in the acidic solution. The transfer coefficient and current density for formaldehyde were calculated 0.23 and 19.8 mA/cm², respectively. The rate constant for catalytic reaction was calculated as 3.6 × 10³ cm³ s^?1 mol^?1 via Cottrell equation.     

PiSHi: click the images and I tell if you are a human

This paper introduces pictorial intelligent system for human identification (PiSHi), an image-based captcha which uses three human cognitive abilities to distinguish humans from machines. The first is the human ability to easily recognise the image’s upright orientation. The second is the human brain’s ability in recognising a picture’s content when it is only partially visible. And the third is the human ability in unconscious decision making when encountering pictorial challenges. This work models such complicated human patterns in problem solving for the first time. In order to extract these behavioural patterns and save them in a pattern database, we have implemented our own captcha and performed a series of experiments. PiSHi’s interface presents the user with a set of distorted pictures and asks her to click on the upright orientation of all the pictures in any preferred order. Next, it captures the user’s interaction patterns, compares them with the ones saved in the pattern database, and grants her a corresponding credit. Based on this credit, the user either passes or fails the test, and participates in updating the picture database. Our experiments indicate that human users can solve our proposed captcha effectively—with an accuracy of 99.44 %. Besides, our proposed system is secure against several types of attacks including random guessing and reverse image search engines. The results offer the possibility of utilising the identified human behavioural models in practical captchas.