Determination of the physical and mechanical properties of iron-based powder materials produced by microwave sintering

Microwave energy is highly efficient for heating and processing different materials. In recent years, this type of heat transfer has been used in sintering process. Rapid and highly efficient heating, time and energy saving, and improved properties of sintered materials are advantages of microwave sintering. In this paper, Fe and Fe-Cu powder compact samples (cylindrical and bone shapes) are sintered both in microwave and electrical tube furnaces. The microwave generator has 2.45 GHz frequency and 1 KW power. Times are selected in the range of 5–25 min for microwave sintering and 5–40 min for electrical heating. The sintering temperature is set at 1120°C. Samples are sintered in the reducing atmosphere of 95% N₂ + 5% H₂ mixture. The density, hardness, and tensile strength of the samples are measured. The results are compared. The results show that the microwave-sintered materials have a finer microstructure. The microwave-sintered materials have 6–8% higher density, 5–10 HV5 higher hardness, and about 10% higher tensile strength than conventionally sintered materials.     

Feature extraction using median–mean and feature line embedding

In this article, we propose a feature extraction method based on median–mean and feature line embedding (MMFLE) for the classification of hyperspectral images. In MMFLE, we maximize the class separability using discriminant analysis. Moreover, we remove the negative effect of outliers on the class mean using the median–mean line (MML) measurement and virtually enlarge the training set using the feature line (FL) distance metric. The experimental results on Indian Pines and University of Pavia data sets show the better performance of MMFLE compared to nearest feature line embedding (NFLE), median–mean line discriminant analysis (MMLDA), and some other feature extraction approaches in terms of classification accuracy using a small training set.     

Surface plasmon polariton analogue to Young's double-slit experiment

When a light wave strikes a metal film it can, under appropriate conditions, excite a surface plasmon polariton (SPP)--a surface electromagnetic wave that is coupled to the free electrons in the metal. Such SPPs are involved in a wide range of phenomena, including nanoscale optical waveguiding, perfect lensing, extraordinary optical transmission, subwavelength lithography and ultrahigh-sensitivity biosensing. However, before the full potential of technology based on SPPs (termed 'plasmonics') can be realized, many fundamental questions regarding the interaction between light and matter at the nanoscale need to be answered. For over 200 years, Young's double-slit experiment has been a valuable pedagogical tool for demonstrating the wave nature of light. Here, we perform a double-slit experiment with SPPs to reveal the strong analogy between SPP propagation along the surface of metallic structures and light propagation in conventional dielectric components (such as glass waveguides). This allows us to construct a general framework to describe the propagation, diffraction and interference of SPPs. It also suggests that there is an effective diffraction limit for the lateral confinement of SPPs on metal stripe waveguides, and justifies the use of well-developed concepts from conventional optics and photonics in the design of new plasmonic devices.     

Nutrition education alone improves dietary practices but not hematologic indices of adolescent girls in Iran

BACKGROUND: Iron-deficiency anemia is the most prevalent nutritional deficiency worldwide. Iron-deficiency anemia has particular negative consequences on women in their childbearing years, and its prevention is a high priority in most health systems. OBJECTIVE: This interventional study assessed the effect of nutrition education on hematologic indices, iron status, nutritional knowledge, and nutritional practices of high-school girls in Iran. METHODS: Sixty healthy 16- to 18-year-old girls were randomly selected from two high schools in the city of Ahvaz and divided into two equally matched groups, one that received nutrition education, and one that did not. The education group received instruction in face-to-face sessions, group discussions, and pamphlets for 2 months. The control group did not receive any information during the study. Hematologic tests, corpuscular indices, and serum ferritin levels were measured at baseline and after 2 months. Food-frequency questionnaires were administered and histories taken, clinical signs of nutritional deficiencies observed, anthropometric measurements taken, nutritional knowledge tested, practices determined, and lifestyle questionnaires administered to all subjects. RESULTS: There were no statistically significant differences in any baseline characteristics between the two groups. Scores for nutritional knowledge and practices of the education group were significantly higher after two months compared with the baseline (31.4 +/- 6 vs. 24.3 +/- 5.9 points, p < .001, and 31.2 +/- 5 vs. 28.4 +/- 5.7 points, p < .05, respectively). The scores in the control group showed no significant changes from baseline to 2 months. Mean corpuscular volume values were elevated in the education group (p < .001) but not in the control group. However, in the control group, serum ferritin concentrations showed about a 17% drop at the end of the study (p < .004). There were no changes in other hematologic, lifestyle, clinical, or anthropometric data compared with baseline after completion of the study in both groups. CONCLUSION: These findings indicate that nutritional education can improve knowledge of healthy nutrition and lifestyle choices. Focused nutritional education using available resources and correcting current dietary habits in a vulnerable group of young women may result in dietary changes that can ultimately improve iron intake.     

Generalized Storage Equations for Flood Routing with Nonlinear Muskingum Models

Water Resources Management - The nonlinear Muskingum model is a leading method for hydrologic routing. The efficiency of the nonlinear Muskingum model for routing of hydrograph outflow has been...     

Performance Evaluation of ANN and ANFIS Models for Estimating Garlic Crop Evapotranspiration

Estimation of evapotranspiration (ET) is necessary in water resources management, farm irrigation scheduling, and environmental assessment. Hence, in practical hydrology, it is often necessary to reliably and consistently estimate evapotranspiration. In this study, two artificial intelligence (AI) techniques, including artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS), were used to compute garlic crop water requirements. Various architectures and input combinations of the models were compared for modeling garlic crop evapotranspiration. A case study in a semiarid region located in Hamedan Province in Iran was conducted with lysimeter measurements and weather daily data, including maximum temperature, minimum temperature, maximum relative humidity, minimum relative humidity, wind speed, and solar radiation during 2008–2009. Both ANN and ANFIS models produced reasonable results. The ANN, with 6-6-1 architecture, presented a superior ability to estimate garlic crop evapotranspiration. The estimates of the ANN and ANFIS models were compared with the garlic crop evapotranspiration (ETc) values measured by lysimeter and those of the crop coefficient approach. Based on these comparisons, it can be concluded that the ANN and ANFIS techniques are suitable for simulation of ETc.     

Application of multidivisional bi-level programming to coordinate pricing and inventory decisions in a multiproduct competitive supply chain

This study concerns the coordination of pricing and inventory decisions in a multiproduct two-stage supply chain that consists of one manufacturer and multiple retailers within a competitive environment. The retailers order some substitutable products from a common manufacturer. It is assumed that channel members have different market power. The purpose of this paper is to coordinate pricing and inventory decisions such that utility of all involved levels (manufacturer and retailers) is met. Hence, a nonlinear multidivisional bi-level programming model is developed. This model considers both retailers and manufacturer when deciding about the pricing and production volume (for manufacturer) or amount of purchase (for retailers). A hybrid of genetic algorithm (GA) and local search method is proposed to solve the nonlinear bi-level model. This model is reduced to a nonlinear programming by replacing the Karush–Kuhn–Tucker (KKT) conditions of followers to the lower level of the model. Then, the obtained single-level model is relaxed to a linear model to achieve an upper bound (UB). Finally, a numerical example is presented to analyze which parameters have more effect on the price, lot size and, consequently, on the profit. Results show that increasing the market scale parameter of the manufacturer increases the profit of the manufacturer, but the market scale parameter of retailers has no effect on the manufacturer’s profit, although it increases the retailers’ profit.     

Biofilm reduction,cell proliferation,anthelmintic and cytotoxicity effect of green synthesised silver nanoparticle using Artemisia vulgaris extract

Infectious diseases are caused by etiological agents. Nanotechnology has been used to minimise the effect of clinical pathogens which have resistance to antibiotics. In current research synthesis, characterisation and biological activities of green synthesised nanoparticles using Artemisia vulgaris extract have been done. The characterisation of AgNPs was carried out using Fourier transform infrared spectroscopy, UV‐Vis spectrophotometry, and scanning electron microscopy. Anti‐biofilm, cell viability, antibacterial, brine shrimp lethality, and deoxyribonucleic acid protection effects have been screened. UV‐Vis spectra showed the absorption peak of synthesised nanoparticles at 400 nm. FT‐IR indicated the involvement of the functional group in the preparation of AgNPs. SEM showed the spherical shape of AgNPs with 30 nm diameter. Biological screening results revealed the antibacterial effect against clinical bacterial pathogens. Biofilm reduction and cell viability assay also supported the antibacterial effect. Cytotoxicity effect was recorded as 100% at 200 μg/ml through brine shrimp lethality assay. Protein kinase inhibition zones recorded for AgNPs (16 mm bald) compared with A. vulgaris extract (11 mm bald). It has been concluded that green synthesised AgNPs are more effective against infectious pathogens and could be used as a potential source for therapeutic drugs.Inspec keywords: cellular biophysics, toxicology, silver, nanoparticles, nanomedicine, diseases, microorganisms, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, enzymes, molecular biophysicsOther keywords: biofilm reduction, cell proliferation, anthelmintic effect, cytotoxicity effect, green synthesised silver nanoparticle, Artemisia vulgaris extract, infectious diseases, aetiological agents, Fourier transform infrared spectroscopy, UV‐Vis spectrophotometry, scanning electron microscopy, SEM, antibiofilm, cell viability, brine shrimp lethality, deoxyribonucleic acid protection effects, AgNP, cytotoxicity, protein kinase inhibition zones, therapeutic drugs     

Chemical vapor deposition of poly(3‐alkylthiophene) nanoparticles on fabric: Chemical and electrochemical characterization

Chemical vapor deposition of poly(3‐methylthiophene) and poly (3‐hexylthiophene) as conductive polymers on the surface of polyester fabrics was successfully obtained. Fourier transform infrared spectroscopy confirmed the formation of polymers on surface of fabrics (the fingerprint of polythiophenes, υ 600–1500 cm^?1). The uniformity of deposition and nanoparticles (average size of 60 nm) were proved with scanning electron microscopy. Electrochemical impedance spectroscopy showed that P3HT‐coated samples offer higher conductivity in compared to P3MT‐coated samples. The impedance modulus of P3HT‐coated samples was lowered nine times to that of row materials and reached to c8000 Ω. The samples have also shown electrochromic properties under electrical current, changing its color from yellowish green at 0 V to dark green at +12 V for poly (3‐hexylthiophene) samples and from brown at 0 V to red at +12 V for poly(3‐methylthiophene)‐coated fabrics (V = 0 V, λ = 450 nm; V = 12 V, λ = 650 nm). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40673.