Synthesis of Various Water-Soluble G60 Derivatives and Their Superoxide-Quenching Activity

Abstract

In order to examine the utility of fullerene as a medicinal application, we evaluated the reaction between fullerene derivatives and active oxygen species in vitro. This paper describes the synthesis of various water-soluble C₆₀ derivatives (cationic and anionic) and evaluation of their superoxide (O₂ ^?) quenching activity. Cationic C₆₀ derivatives showed fairly high efficiency.     

Skin Permeation of Lidocaine from Crystal Suspended Oily Formulations

ABSTRACT

In vitro permeation of lidocaine (lidocaine base, LID) through excised rat skin was investigated using several LID-suspended oily formulations. The first skin permeation of LID from an LID-suspended oily solution such as liquid paraffin (LP), isopropyl myristate (IPM), polyoxyethylene (2) oleylether (BO-2), and diethyl sebacate (DES) was evaluated and compared with that from polyethylene glycol 400 (PEG400) solution, a hydrophilic base. The obtained permeation rate of LID, J_app, from PEG400, LP, IPM, BO-2, and DES was in the order of DES>BO-2 = IPM>LP>PEG400, and increased with LID solubility in the oily solvents, although LID crystals were dispersed in all solvents. Subsequently, oily formulations that consisted of different ratios of the first oily solvent (IPM, BO-2, or DES) (each 0–20%), the second oily solvent (LP) and an oily mixture of microcrystalline wax/white petrolatum/paraffin (1/5/4) were evaluated. BO-2 groups at a concentration of 5% and 10% had the highest J_app among the oily formulations, although a higher BO-2 resulted in lower skin permeation. In addition, pretreatment with BO-2 increased the skin permeation of LID. These results suggest that the penetration enhancing effect by the system may be related to the skin penetration of BO-2 itself. Finally, mathematical analysis was done to evaluate the effect of BO-2, and it was shown that BO-2 improved the LID solubility in stratum corneum lipids to efficiently enhance the LID permeation through skin.     

Influence of counter material on friction and wear performance of PTFE–metal binary coatings

The study presented in this paper concerns the influence of the counter materials on wear and friction performance of polytetrafluoroethylene (PTFE) reservoirs arranged in distinct patterns on coated surfaces. Al-bronze and Mo coatings were deposited on a mild steel substrate using an atmospheric plasma spray process. Three patterns of PTFE reservoirs were used. Pins, which served as counter surface, were made of three different materials. Wear tests were carried out in a pin-on-disc test rig at room temperature and under dry contact conditions. The tests were carried out at a constant pressure of 10 MPa. An average linear speed of the test disc was 0.036 m/s. The importance of appropriately matched hardness of two surfaces in sliding contact is emphasised. Due to inadequate hardness of the counter material, performance of Mo coating was adversely affected and expected beneficial action of PTFE reservoirs severely hindered. Al-bronze coating proved to be performing far better than Mo coating. Serious deterioration of Mo coating occurred faster than that for Al-bronze coating.     

The effect of the hydrothermal treatment with aqueous NaOH solution on the photocatalytic and photoelectrochemical properties of visible light-responsive TiO2 thin films

The effect of the hydrothermal treatment with aqueous NaOH solution on the photoelectrochemical and photocatalytic properties of visible light-responsive TiO₂ thin films prepared on Ti foil substrate (Vis-TiO₂/Ti) by a radio-frequency magnetron sputtering (RF-MS) deposition method has been investigated. The hydrothermally treated Vis-TiO₂/Ti electrodes exhibited a significant increase in their photocurrent under UV and visible light irradiation as compared to untreated Vis-TiO₂/Ti electrode. SEM investigations revealed that the surface morphology of Vis-TiO₂/Ti are drastically changed from the assembly of the TiO₂ crystallites to the stacking of nanowires with diameters of 30–50 nm with increasing hydrothermal treatment time (3–24 h), accompanying the increase in their surface area. The separate evolution of H₂ and O₂ from water under solar light irradiation was successfully achieved using the Vis-TiO₂/Ti/Pt which is hydrothermally treated for 5 h, while the H₂ evolution ratio was 15 μmol h⁻¹ in the early initial stage, corresponding to a solar energy conversion efficiency of 0.23%.     

Identification of Ustilago cynodontis as a new producer of glycolipid biosurfactants, mannosylerythritol lipids, based on ribosomal DNA sequences

Mannosylerythritol lipids (MELs) are one of the most promising glycolipid biosurfactants known because of their multifunctionality and biocompatibility. The search for novel producers of MELs was undertaken based on the analysis of ribosomal DNA sequences on basidiomycetous yeasts. The bermuda grass smut fungus Ustilago cynodontis NBRC 7530, which taxonomically relates to Pseudozyma shanxiensis known as a MEL-C producer, was found to accumulate glycolipids in the cultured medium. Under a shake flask culture with soybean oil, the amount of the glycolipids was 1.4 g/L for 7 days at 25 degrees C. As a result of the structural characterization, the main glycolipids was identified as 4-O-[(4'-O-acetyl-3'-O-alka(e)noyl-2'-O-butanoyl)-beta-D-mannopyranosyl]-D-erythritol, and the major fatty acids were C(14) and C(16) ones. The glycolipid was highly hydrophilic MEL-C, and very similar to those produced by P. shanxiensis. The fungi of the genus Ustilago are thus likely to be potential producers of MELs as well as the yeasts of the genus Pseudozyma.     

Identification of Pseudozyma graminicola CBS 10092 as a producer of glycolipid biosurfactants, mannosylerythritol lipids

A basidiomycetous yeast, Pseudozyma graminicola CBS 10092, was found to accumulate a large amount of glycolipids in the cultured medium when grown on soybean oil as the sole carbon source. Based on thin layer chromatography, the extracellular glycolipids gave spots corresponding to those of mannosylerythritol lipids (MELs), which are highly functional and promising biosurfactants. From the structural characterization by 1H and 13C NMR, the main product was identified as 4-O-[(4'-mono-O-acetyl-2', 3'-di-O-alka(e)noyl)-beta-D-mannopyranosyl]-D-erythritol, which is a highly hydrophilic derivative of MELs known as MEL-C. According to high-performance liquid chromatography analysis, the main product, MEL-C, comprised approximately 85% of all the MELs, and the total amount reached approximately 10 g/L for 7 days. The fatty acids of the present MEL-C consisted of mainly C6, C8 and C14 acids, considerably different from those of MEL-C produced by other Pseudozyma strains such as P. antarctica and P. shanxiensis. The observed critical micelle concentration (CMC) and the surface-tension at CMC of the MEL-C were 4.0 x 10(-6) M and 24.2 mN/m, respectively, while those of MEL-A, the most intensively studied MEL, were 2.7 x 10(-6) M and 28.4 mN/m, respectively. This implied that the MEL-C has higher hydrophilicity than conventional MELs hitherto reported. In addition, on a water-penetration scan, the MEL-C efficiently formed the lamella phase (Lalpha) at a wide range of concentrations, indicating its excellent self-assembling properties. From these results, the newly identified MELs produced by P. graminicola are likely to have great potential for use in oil-in-water type emulsifiers and/or washing detergents, and would thus facilitate a broad range of applications for the promising yeast biosurfactants.     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Molecular dynamics simulation of microcrystalline Si deposition processes by silane plasmas

Molecular dynamics (MD) simulations have been performed to examine enhanced surface diffusion of Si adatoms during silane(SiH₄)-based plasma enhanced chemical vapor deposition (PECVD) processes. Such high surface diffusion, if it actually takes place, has been known to account for the growth of microcrystalline silicon(μc-Si) in the PECVD process. Focused in the present study is the motion of a silicon (Si) adatom on a hydrogenated Si surface and the surface diffusion coefficient of Si adatoms on the fully hydrogenated (111) Si surface at 600 K was evaluated from MD simulations. The obtained diffusion coefficient is much larger than those of typical clean Si surfaces known in the literature. The interatomic potential functions for Si-H systems used for the simulations, which we have developed for this study based on ab initio calculations of the interatomic energies, are also presented.     

New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.     

Gallic acid oxidizes Met residues in peptides released from bovine β-lactoglobulin by in vitro digestion

Phenolic compounds (PCs) are frequently present in foods. However, little is known about the effect of PCs on enzymatic digestion process of food proteins and their products. In this study, the effect of gallic acid (GA) on in vitro digestion of β-lactoglobulin (β-LG) was investigated as a model system for analysis of the interaction between PCs and food proteins. GA showed no effect on the initial rate of β-LG digestion. However, after 1.5 h of digestion, the observed degree of hydrolysis of β-LG was lower in the presence than in the absence of GA. The peptides released from β-LG were characterized by LC/IT-TOF-MS and thirty peptides were identified. In particular, four new peaks were obtained following in vitro digestion of β-LG in the presence of GA. Met(7), Met(24) and Met(145) in the peptides corresponding to these peaks were oxidized to methionine sulfoxide residues.