An order acceptance strategy under limited engineering man-hours for cost estimation in Engineering–Procurement–Construction projects

Accurate cost estimation is essential for any Engineering–Procurement–Construction (EPC) contractor accepting profitable projects because the project price is determined prior to receiving the contract. Therefore the contractor needs to ensure engineering man-hours (MH) in order to estimate project costs accurately as well as carry out the accepted orders. In this paper, we develop MH based order acceptance strategies and investigate their effects on the total expected profit through a long-term operation in EPC projects under a competitive bidding situation. To this end we build a simulation model describing relations among the volume of MH for cost estimation, accepted orders, revenues, and profits in EPC projects. Using our model, we show that the strategy, which maintains the appropriate balance of MH for cost estimation and project execution under the variability of accepted orders with competitive bidding situations, improves the total expected profit in EPC projects.     

New electrical shunt with two rectangular holes in a copper plate

A new concept of an electrical shunt with two rectangular holes in a copper plate (ESRP) has been developed to be used for measuring a large current with a short‐duration steep wave in a high‐voltage field. The ratio of the input current to the output current is 10⁶, as obtained from a DC voltage test circuit. The electrical shunt has a special configuration. To verify the shunt current ratio of ESRP in a real application, the shunt current was connected to a sphere‐to‐sphere electrode breakdown test circuit with a 10 mm gap to measure the large damping current (8.4 kA) of a DC breakdown voltage. The voltage signal from the shunt was transmitted to excite two light‐emitting diodes (max. 50 mA, 4 V), which were reverse‐connected in series. The light‐emitting diodes operated properly and were illuminated, which validated the capability of the newly designed electrical shunt. © 2015 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Synthesis of polyamide-hydroxyapatite nanocomposites

Simultaneous one-pot syntheses of PA66 and HAp were carried out by extracting H₂O and CO₂ from PA66 monomers and HAp raw materials, respectively, resulting in the formation of a polyamide (PA) 66-hydroxyapatite (HAp) nanocomposite. During the process, a spherical nano-sized HAp particle was precipitated following dissolution of micro-sized CaHPO₄・2H₂O. The PA66 monomers were subsequently adsorbed onto the generated HAp product. Some of the adsorbed PA66 monomers formed a bound polymer on HAp, and an increase in the adhesiveness of the PA66-HAp interface was observed as the polymerization progressed. During this process, the synthesis of a nanocomposite from a micro-sized raw material and creation of an autonomous strong interface between the matrix and filler was achieved. In addition, the shape of the resultant HAp was controllable and could be modified to needle shape by the addition of F⁻ and Mg²⁺ ions to the raw material. HAp could also be changed to plate shape via octa-calcium phosphate (OCP). Notably, during the synthesis, the filler shape of the nanocomposite could be controlled to 0D (particle), 1D (needle), and 2D (plate).     

Determination of residual avoparcin in chicken muscle by HPLC with ultraviolet and amperometric detection

An analytical method was developed for determination of residual avoparcin in chicken muscle by measuring alpha- and beta-avoparcin, major components of the pharmaceutical preparation avoparcin, using HPLC with UV and amperometric detectors. The analytical HPLC was run on a Cosmosil 5C18-AR column (4.6 mm x 25 cm) with a gradient formed from A: 2.5% acetic acid, 0.01 mol/L sodium heptane sulfonic acid-acetonitrile (88.5:11.5) (pH 4.0) and B: 2.5% acetic acid-acetonitrile (10:90), using UV and amperometric detection (AMD) with glassy-carbon electrode (+900 mV). Avoparcin was extracted from chicken muscle by homogenization with methanol-0.2 mol/L sulfuric acid (6:4) followed by centrifugation after pH adjustment to 4 with 1 mol/L sodium hydroxide. The supernatant was evaporated to dryness, and the residue was dissolved in water. The aqueous layer was adjusted to pH 4 by adding 1 mol/L sodium hydroxide. Then it was purified on a Sep-Pak tC18 plus ENV cartridge. The cartridge was washed with water, and retained substances were eluted with 50% methanol. The eluate was evaporated to dryness under reduced pressure. The residue was dissolved in water and determined by HPLC. Recoveries of avoparcin spiked in chicken muscle were 73.1-88.1% at levels of 2-10 micrograms/g. The detection limits were 0.5 microgram/g (UV) and 0.2 microgram/g (AMD).     

High Resistance of Cu–Ferrierite to Coke Formation During NH3-SCR in the Presence of n-Decane

Selective catalytic reduction of NO _x by NH₃ over Cu–FER and Cu–ZSM-5 in the presence of n-decane and SO₂ was investigated. NO _x conversion over Cu–ZSM-5 decreased in the presence of n-decane, owing to inhibition of the active sites by coke formation. In contrast, coke formation was negligible over Cu–FER, which maintained its NO _x conversion activity even in the presence of decane. Coke formation was negligible over H–ZSM-5 and H–FER supports, which suggests that Cu species were involved in coke formation. Temperature-programmed reduction by H₂ and electron spin resonance spectroscopy indicated that [Cu–O–Cu]²⁺ was probably the Cu species involved in coke formation over Cu–ZSM-5.     

Catalytic Performance of Aged Rh/CeO2–ZrO2 for NO–C3H6–O2 Reaction Under a Stoichiometric Condition

The activity of Rh/CeO₂ for NO reduction by C₃H₆ was gradually deceased by mixing with ZrO₂ until 68 mol%. Rh supported on CeO₂–ZrO₂ with higher OSC was found to show lower catalytic activity. High OSC of CeO₂–ZrO₂ would probably stabilize the surface of Rh in oxidized state, resulting in low activity and low efficiency of C₃H₆ utilization for NO reduction. In situ FT-IR spectroscopy suggested that mononitrosyl species such as Rh(NO)^δ? and Rh(NO)^δ+ are reaction intermediates in the NO–C₃H₆–O₂ reaction over Rh/CeO₂–ZrO₂ catalysts.     

Mutational analysis of structure--activity relationships in human tumor necrosis factor-alpha

To determine the region of human tumor necrosis factor-alpha(TNF-), essential for cytotoxic activity against mouse L-M cells,single amino-acid-substituted TNF- mutant proteins (muteins)were produced in Escherichia coli by protein engineering techniques.An expression plasmid for TNF- was mutagenized by passage throughan E.coli mutD5 mutator strain and by oligonucleotide-directedmutagenesis. Approximately 100 single amino-acid-substitutedTNF- muteins were produced and assayed for cytotoxic activity.The cytotoxic activities of purified TNF- muteins, e.g. TNF-31T,-32Y, -82D, -85H, -115L, -141Y, -144K and -146E, were < 1%of that of parent TNF-. These results indicate that the integrityof at least four distinct regions of the TNF- molecule is requiredfor full biological activity. These regions are designated asfollows: region I, from position 30 to 32; region II, from position82 to 89; region III, from position 115 to 117; region FV, fromposition 141 to 146. In addition, TNF-141Y could not completelycompete with parent TNF- for binding to the receptor. This demonstratesthat region IV, and at least aspartk acid at position 141, mustbe involved in the TNF receptor binding site.     

Fabrication of bilayered YSZ/SDC electrolyte film by electrophoretic deposition for reduced-temperature operating anode-supported SOFC

Bilayered Y₂O₃-stabilized ZrO₂ (YSZ)/Sm₂O₃-doped CeO₂ (SDC) electrolyte films were successfully fabricated on porous NiO–YSZ composite substrates by electrophoretic deposition (EPD) based on electrophoretic filtration followed by co-firing with the substrates. In EPD, positively charged YSZ and SDC powders were deposited directly on the substrates, layer by layer from ethanol-based suspensions. Delamination between YSZ and SDC films was avoided by reducing the SDC films’ thickness to ca. 1 μm. A single cell was constructed on the bilayered electrolyte films composed of ca. 4 μm-thick YSZ and ca. 1 μm-thick SDC films. As a cathode in the cell, La_0.6Sr_0.4Co_0.2Fe_0.8O_3−x (LSCF) was used. Maximum output power densities greater than 0.6 W cm⁻² were obtained at 700 °C for the bilayered YSZ/SDC electrolyte cells thus constructed.     

EFFECT OF FLUIDIZING PARTICLE ON DRYING CHARACTERISTICS OF POROUS MATERIAL IN FLUIDIZED BED

The drying characteristics of porous material in fluidized bed were examined theoretically and experimentally. The brick ball was used as the sample and immersed in the fluidized bed. The glass beads were used as the fluidizing particles and the particle diameters were changed. When the pore diameter of sample was relatively large, the fluidizing particles were adhered on the sample surface. In the theoretical analysis, the heat and mass transfers in adhered particle layer were considered. The fluidizing particles were adhered on the sample surface during the earlier period of drying. The sample temperature largely decreased when the mass of adhered particle decreased. The calculated results are in good agreement with experimental data. The diameter of fluidizing particle had a small effect on the drying time. The excess increments in drying gas temperature hardly contributed to shortening the drying time.