Passive piezoelectric single-side MEMS DC current sensor with five parallel PZT plates applicable to two-wire DC electric appliances without using cord separator

A passive (power-less), non-contact macro-scale piezoelectric bimorph DC current sensor to satisfy the increasing needs of DC power supply for monitoring the electricity consumption by either one-wire or two-wire appliance cord was proposed at our laboratory previously. In present study however, a MEMS-scale piezoelectric single-side DC current sensor, comprised of five parallel PZT plates, was further proposed and micro-fabricated for preliminarily examination. A micro magnet was fixed by manipulator onto the PZT cantilever tip to the theoretically pinpointed position of the center plate. Different from the results of the macro-scale piezoelectric bimorph DC current sensor, impulsive piezoelectric output voltages accompanying with a gradual decrease in decay were detected when the applied DC electric current was varied from 0.5 to 2.5 A. A linear relationship between the detected peak value of the impulse output voltage and the applied DC electric current was also obtained but with a higher slope compared to the result of the macro-scale piezoelectric bimorph DC current sensor.     

Effect of drawing condition on mechanical properties and molecular orientation of self-reinforced poly(lactic acid) screws

Effects of extrusion ratio (ER) during extruding on mechanical properties of poly(lactic acid) (PLA) screws were investigated in terms of shear and twist strength. Shear strength increased by drawing, while twist strength decreased. This might be due to orientation of molecular chains during drawing. In order to evaluate orientation of molecular chains, orientation function in extruded billets was measured as a function of ER. Since orientation function increased with ER, drawing is effective method to improve shear strength of screw, where fibrous structure which was formed during extruding resisted shear stress in cross-section perpendicular to screw axis. Although orientation functions for billet extruded at ER 1.3–4 were equivalent, both strengths changed for the screw extruded at the range of this ER. Infrared spectra suggested transforming from α to β crystal for the billet extruded at the range of this ER. This result suggested that mechanical properties of screw also depended on the crystal forms.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Simplified resazurin rennet test for diagnosis of mastitis.

A simplified resazurin rennet test for diagnosis of bovine mastitis was devised. A tablet of resazurin and rennet was placed in a sterile test tube to which 10 ml of milk were added directly from a teat. The test tube was incubated for 1 h at 37 C. After incubation the change in color of resazurin and the time required for coagulation by the rennet were observed. From the results the milk samples tested were classified into four types. Cell count, modified California Mastitis Test, coagulase positive staphylococci, and contents of solids-not-fat, lactose, and protein differed among the four types. This method is simple and practically useful for diagnosis of bovine mastitis.     

Sulfide oxidation by gene expressions of sulfide-quinone oxidoreductase and ubiquinone-8 biosynthase in Escherichia coli

Sulfides (S2),SH-) such as hydrogen sulfide belong to a class of sulfur compounds with unpleasant odors. In order to confer sulfide-oxidizing ability on the intestine-inhabiting bacteria, the sulfide-quinone oxidoreductase gene (sqr) in Rhodobacter capsulatus DSM-155 and genes for quinone biosynthesis (ubiC, ubiA and ispB) in Escherichia coli XL1 Blue-MRF' were transduced into E. coli BL21(DE3). Plasmids pT7-7 and pSTV were used as vectors of sqr, and ubiCA and ispB, respectively. The recombinants sqr-BL21(DE3) and ubiCA,ispB-sqr-BL21(DE3) were successfully constructed. The maximal sulfide-removing activities of the whole cells and membrane fractions of sqr-BL21(DE3) attained at pH 8.0 and 7.8, were 267 nmol/mg cells (dry weight)/min and 1250 nmol/mg membrane fraction (protein)/min, respectively. The molecular ratio of sulfide (S2-) oxidized and oxygen (O2) consumed was 2:1. SQR activity in the recombinant cells was positively restricted under anaerobic conditions and also by the addition of electron transfer inhibitors. Ubiquinone-8 (UQ-8) biosynthesis in the cells of ubiCA,ispB-sqr-BL21(DE3) increased as much as 2.2-fold compared with that of (pSTV)-sqr-BL21(DE3) during the 12-16 h incubation period. The maximal sulfide removal in the quinone-raised E. coli was attained slightly earlier, however, SQR activities thereafter were lower than those in (pSTV)-sqr-BL21(DE3).     

Catalytic Performance of Aged Rh/CeO2–ZrO2 for NO–C3H6–O2 Reaction Under a Stoichiometric Condition

The activity of Rh/CeO₂ for NO reduction by C₃H₆ was gradually deceased by mixing with ZrO₂ until 68 mol%. Rh supported on CeO₂–ZrO₂ with higher OSC was found to show lower catalytic activity. High OSC of CeO₂–ZrO₂ would probably stabilize the surface of Rh in oxidized state, resulting in low activity and low efficiency of C₃H₆ utilization for NO reduction. In situ FT-IR spectroscopy suggested that mononitrosyl species such as Rh(NO)^δ? and Rh(NO)^δ+ are reaction intermediates in the NO–C₃H₆–O₂ reaction over Rh/CeO₂–ZrO₂ catalysts.     

Effect of blending on liquefaction of coals

After solvent extraction of Taiheiyo, Miike and Balmer coals using wash oil under nitrogen atmosphere at 370 °C for 30 min, the extraction yield is always within the additivity law. Further studies used Yallourn, Soyakoishi, Taiheiyo, Horonai, Miike, Shin Yubari, Balmer coals and their blends which were hydrogenated in tetralin, wash oil or creosote oil, with or without catalyst, at 400–450 °C under 10 or 3 MPa of initial hydrogen pressure. When hydrogen is available, the additivity law exists for blended coals, but when the hydrogen supply is deficient, the experimental conversion of blended coals is always lower than calculated conversions. This may be due to the faster consumption of the hydrogen by more reactive coals and thus the less reactive coals were unable to react with hydrogen.     

Development of localization system using ultrasonic sensor for an underwater robot to survey narrow environment

This paper describes a localization system for a swimming robot to survey underwater narrow environments. In that environment, external sensors cannot be set up to localize the robot position, as there are many structures and the robot moves three-dimensionally. Therefore, the position needs to be calculated only by internal sensors. In this work, a new localization method based on map-matching is proposed, referring to cross-sectional shape data cut from a three-dimensional computer-aided design (CAD) data as an environmental map and structural shapes measured by a range sensor. As a range sensor, an ultrasonic sensor which is two-dimensional scanning-type was developed. The reflected signals of the ultrasonic sensor have some noise. Only structural shape data are extracted from the reflected signals. The image correlation is used as the matching method. Experiments to evaluate the performance of the proposed system were implemented at a mock-up environment. As a result, it was confirmed that the position was detected with an accuracy of 100 mm. The error is mainly caused by measurement error of the ultrasonic sensor that is used to calculate structural shapes. We concluded to improve the measurement accuracy of the ultrasonic sensor to reduce localization error.