Further study on different dopings into PbWO4 single crystals to increase the scintillation light yield

Since we presented our preliminary result (Nucl. Instr. and Meth. A 486 (2002) 170) at SCINT2001, we have continued our efforts to increase the light yield (LY) of PbWO₄ scintillators by extending different dopings with an aim to find a possibility of using PbWO₄ successfully in Positron Emission Tomography (PET). Overall result obtained for single doping as well as double and tripple co-dopings are summarized, including decay characteristics and radiation hardness. The LY in non-doped PbWO₄ crystals with a size of 10×10×(20–30) mm³ is 25–35 photolectrons/MeV (phe/MeV) corresponding to 3–4% of the LY in BGO, when measured with a bialkali photomultiplier during a gate of 1 μs. The maximum LY increased to 49 phe/MeV for single doping with Mo⁶⁺, 80 phe/MeV for double co-doping of Mo⁶⁺+Sb⁵⁺, and 85 phe/MeV for tripple co-doping of Mo⁶⁺+Cd²⁺+Sb⁵⁺. The radiation hardness is larger than 10⁵ Gy for each of the samples co-doped with Mo⁶⁺+Sb⁵⁺ and Mo⁶⁺+Cd²⁺+Sb⁵⁺, while it is much poorer in PWO:Mo⁶⁺. In each of these co-doped samples, a medium-speed green emission in the microsecond range is created besides the fundamental fast (a few nanoseconds range) blue one, giving a peak at 500 nm in the radioluminescence spectrum similarly as in PWO:Mo⁶⁺.     

Importance of multiple-phonon interactions in molecular dissociation and nanofabrication using optical near fields

A quasi-particle (exciton-phonon polariton) model, as a simple model of an optical near-field probe, is proposed to investigate an unresolved problem in photochemical processes, i.e., why a vapor molecule can be dissociated by an incident photon with less energy than the dissociation energy only if, not a propagating far field, but an optical near field is used, and what is the mechanism leading to the photon flux dependence of the deposition rates. Incident photon energy and intensity dependences of Zn deposition rates are analyzed, and good agreement between the theoretical and experimental results is obtained. It suggests that the probe system plays an important role in vibrational transitions as well as electronic transitions in photodissociation processes, and that the couplings between the optical near field and molecular vibrations are enhanced to permit a nonresonant photodissociation inherent in the optical near field.     

Spectroscopic imaging and the characterization of the autofluorescence properties of human bronchus tissues using UV laser diodes

Ultraviolet laser diodes (UV-LD) were used for the excitation source of autofluorescence (AF) measurements and spectroscopic imaging of the AF originating from the human bronchus was obtained. The AF spectra from normal bronchus tissues were measured and a clear AF spectrum was obtained by using a short wavelength (400 nm) laser diode; the overlap of the AF signal and excitation source could be substantially eliminated. In order to study the origin of AF intensity deterioration from bronchus tissue due to the formation of tumor tissues, the fluorescence spectrum was measured for various AF substances under various conditions. The blue AF signal of elastin and NADH solutions, which could not be easily studied by conventional excitation light sources, as well as the green AF became weak by adding lactic acid. The AF spectrum was measured for 512/spl times/512 pixels and the intensity mapping as a function of emission wavelength was obtained. Two-dimensional information of the AF signal intensity distribution for a certain wavelength component was measured. The feature originating from a region as small as about 100 /spl mu/m could be recognized. Numerical calculations of the data were performed and precise features of the AF were revealed.     

Diode-pumped tunable Yb:YAG miniature lasers at room temperature:modeling and experiment

We present a simple design rule for diode-laser pumped quasi-three-level lasers by using the M² factor. The validity of this model was demonstrated by diode-pumped Yb:YAG laser experiments. The maximum output power of 1.33 W and optical slope efficiency of 63% were obtained in a 400-μm Yb:YAG chip miniature laser. Using a 200-μm Yb:YAG chip, a 70% optical slope efficiency was reached. In a coupled-cavity configuration, with a quartz birefringent tuning filter, 8.2 THz (29 nm) of tuning was obtained at room temperature. By changing to a calcite birefringent filter, single-axial-mode oscillation with an output power of 500 mW was observed     

Narrow-beam divergence 1.3-μm multiple-quantum-well laser diodeswith monolithically integrated tapered thickness waveguide

This paper describes the optimum design, fabrication, and performance of a 1.3-μm multiple-quantum-well (MQW) laser diode monolithically integrated with a tapered thickness spot-size transformer. The dependence of the lasing characteristics on the thickness distribution of the core layer and on the current injection profile of the device were analyzed. This integrated laser with its optimized structure performed at a low threshold current of 22.2 mA, even at 85°C. The integrated spot-size transformer effectively reduced the lateral and vertical far-field FWHM's to 8° and 9°, respectively. A very long lifetime of over 1×10⁵ h was estimated at 85°C and 8 mW under CW operation     

Sensor Fusion System Using Recurrent Fuzzy Inference

In robotic and manufacturing systems, it is difficult to measure the state of systems accurately because of many uncertain factors and noise, and it is very important to estimate the state of systems. We must measure the phenomena of systems by multiple sensors and estimate the state of systems by acquiring information of sensors. However, we can not acquire all of sensor information synchronically, because each sensor has particular sensor information and measuring time. For estimating the state of systems by multiple sensors, a multi-sensor fusion system fusing various sensory information is needed. In this paper, we propose a Recurrent Fuzzy Inference (RFI) with recurrent inputs and apply it to a multi-sensor fusion system for estimating the state of systems. The membership functions of RFI are expressed by Radial Basis Function (RBF) with insensitive ranges. The shape of the membership functions can be adjusted by a learning algorithm. The learning algorithm is based on the steepest descent method and incremental learning which can add new fuzzy rules. The effectiveness of the multi-sensor fusion system using RFI will be shown through a numerical experiment of moving robot and estimation of surface roughness in grinding process.     

A simple adaptive PI controller for linear systems with constantdisturbances

It is known that an adaptive controller via high-gain output feedback can globally stabilize a class of minimum phase systems with relative degree one. However, exact output regulation is difficult for systems with disturbances. In this paper, we consider linear single-input/single-output (SISO) systems with unknown constant disturbances. We present a simple adaptive output feedback controller with an integral action and show that it can asymptotically stabilize those disturbed systems. The proposed PI type adaptive controller can also deal with the output tracking problem of a step reference     

Leak-tightness characteristics concerning the containment structures of the HTTR

The containment structures of the HTTR consist of the reactor containment vessel, the service area, and the emergency air purification system, which minimise the release of fission products in postulated accidents, which lead to fission product release from the reactor facilities. The reactor containment vessel is designed to withstand the temperature and pressure transients and to be leak-tight in the case of a rupture of the primary concentric hot-gas duct, etc. The pressure inside the service area is maintained at a negative pressure by the emergency air purification system. The emergency air purification system will also remove airborne radioactivity and will maintain a correct pressure in the service area.The leak-tightness characteristics of the containment structures are described in this paper. The measured leakage rates of the reactor containment vessel were enough less than the specified leakage limit of 0.1%/d confirmed during the commissioning tests and annual inspections. The service area was kept in a way that the design pressure becomes well below its allowable limitation by the emergency air purification system, which filters efficiency of particle removal and iodine removal well over the limited values.The obtained data demonstrate that the reactor containment structures were fabricated to minimise the release of fission products in the postulated accidents with fission product release from the reactor facilities.     

Thermomechanical fatigue behavior of the third-generation,single-crystal superalloy TMS-75: Deformation structure

The deformation structure after the out-of-phase thermomechanical fatigue (OP TMF) of the single-crystal (SC), Ni-based superalloy TMS-75 has been studied. Mechanical experiments were performed at temperatures between 400 °C and 900 °C under different total strain ranges with varying hold times in the compression stage. The lives of TMF for samples with hold times of 10 and 60 minutes dropped drastically by one order of magnitude as compared with those without it. Different structures developed during TMF were correlated to the difference in mechanical behavior for the two cases. The dislocations in the γ phase and the stacking faults (SFs) in the γ′ phase were quantitatively analyzed by transmission electron microscopy (TEM). This work verified that shearing of the γ′ precipitates occurred with a single-dislocation mechanism rather than a dislocation-reaction mechanism. The implications of this work on the design of superalloys are presented.