Demonstrating nanophotonic switching using near-field pump–probe photoluminescence spectroscopy of CuCl quantum cubes

We demonstrated a novel optical switching operation using three CuCl quantum cubes with a size ratio of . Their quantized excitonic energy levels resonate with one another, and the switching mechanism was based on the resonant near‐field energy transfer between the quantum cubes. Using near‐field pump–probe photoluminescence spectroscopy, we succeeded in controlling the near‐field energy transfer and obtained a controlled (i.e. switched) signal in a differential photoluminescence spectrum with and without a pump beam. The internal quantum efficiency of the switching operation was close to 1. These results suggest the possibility of making a nanophotonic switching device smaller than 30 nm.     

Nonmagnetic indenter-type high-pressure cell for magnetic measurements

An indenter-type high-pressure cell has been developed for electric and magnetic measurements in low-temperature and high-magnetic-field environments. The maximum pressure achieved at low temperatures is more than 4.5 GPa, which is higher than that of a conventional piston-cylinder cell. The typical sample space at maximum pressure is 1.6 mm in diameter and approximately 0.7 mm in depth, and magnetic measurements such as ac-susceptibility and nuclear magnetic resonance can be performed using a miniature coil. All the components of the indenter cell are made of nonmagnetic materials that have enough thermal conductivity for low-temperature experiments using a 3He/4He dilution refrigerator. Another indenter-type cell designed for a commercial superconducting quantum interference device magnetometer is also reported.     

Development of dual-probe atomic force microscopy system using optical beam deflection sensors with obliquely incident laser beams

We developed a dual-probe (DP) atomic force microscopy (AFM) system that has two independently controlled probes. The deflection of each cantilever is measured by the optical beam deflection (OBD) method. In order to keep a large space over the two probes for an objective lens with a large numerical aperture, we employed the OBD sensors with obliquely incident laser beams. In this paper, we describe the details of our developed DP-AFM system, including analysis of the sensitivity of the OBD sensor for detection of the cantilever deflection. We also describe a method to eliminate the crosstalk caused by the vertical translation of the cantilever. In addition, we demonstrate simultaneous topographic imaging of a test sample by the two probes and surface potential measurement on an α-sexithiophene (α-6T) thin film by one probe while electrical charges were injected by the other probe.     

Deuterium trapping by irradiation damage in tungsten induced by different displacement processes

The deuterium trapping behaviors in tungsten damaged by light ions with lower energy (10 keV C⁺ and 3 keV He⁺) or a heavy ion with higher energy (2.8 MeV Fe²⁺) were compared by means of TDS to understand the effects of cascade collisions on deuterium retention in tungsten. By light ion irradiation, most of deuterium was trapped by vacancies, whose retention was almost saturated at the damage level of 0.2 dpa. For the heavy ion irradiation, the deuterium trapping by voids was found, indicating that cascade collisions by the heavy ion irradiation would create the voids in tungsten. Most of deuterium trapped by the voids was desorbed in higher temperature region compared to that trapped by vacancies. It was also found that deuterium could accumulate in the voids, resulting in the formation of blisters in tungsten.     

不同掺杂对可加工陶瓷二次电子发射及沿面闪络特性的影响

固体绝缘材料的表面特性极大地影响着其真空沿面闪络特性,长期以来这一现象极大地制约着真空绝缘系统的整体性能,限制了高压电真空设备的发展进程.本文针对一种具有良好加工性能及表面耐电特性的低熔点可加工微晶玻璃陶瓷引入真空绝缘的背景,在不明显降低可加工性能的前提下,通过在可加工陶瓷原材料内掺杂不同的低二次电子发射系数金属氧化物...     

Molecular pharmacology of voltage-dependent calcium channels

Voltage-dependent Ca2+ channels serve as the only link to transduce membrane depolarization into cellular Ca(2+)-dependent reactions. A wide variety of chemical substances that have the ability to modulate Ca2+ channels have been demonstrated both for their clinic utility and for importance in elucidating the molecular basis of various biological responses. Recently, introduction of molecular biology to pharmacology has brought a great deal of information about the molecular basis of drug action in Ca2+ channels. In this review, we attempt to overview recent progress in understanding the interactions between Ca2+ channels and their blockers, namely Ca2+ antagonists, from a molecular and structural point of view.     

Global adaptive stabilization of infinite-dimensional systems

The purpose of this paper is to show that a first-order adaptive regulator globally stabilizes a class of infinite-dimensional systems having no right half plane zeros. Knowledge of the spectrum of the model's high-frequency gain is not required.     

Observation of the intrinsic pinning of a magnetic domain wall in a ferromagnetic nanowire

The spin transfer torque is essential for electrical magnetization switching. When a magnetic domain wall is driven by an electric current through an adiabatic spin torque, the theory predicts a threshold current even for a perfect wire without any extrinsic pinning. The experimental confirmation of this 'intrinsic pinning', however, has long been missing. Here, we give evidence that this intrinsic pinning determines the threshold, and thus that the adiabatic spin torque dominates the domain wall motion in a perpendicularly magnetized Co/Ni nanowire. The intrinsic nature manifests itself both in the field-independent threshold current and in the presence of its minimum on tuning the wire width. The demonstrated domain wall motion purely due to the adiabatic spin torque will serve to achieve robust operation and low energy consumption in spintronic devices.     

Aqueous chromatography utilizing pH-/temperature-responsive polymer stationary phases to separate ionic bioactive compounds

Cross-linked poly(N-isopropylacrylamide-co-acrylic acid) (poly(IPAAm-co-AAc))-grafted silica bead surfaces were prepared and applied as new column matrix materials that exploit temperature-responsive anionic chromatography to separate basic bioactive compounds, specifically catecholamine derivatives, in aqueous mobile phases. Since poly(IPAAm-co-AAc) has a well-known temperature-responsive phase transition and apparent pKa shift, polymer-grafted silica bead surfaces are expected to exhibit simultaneous hydrophilic/hydrophobic and charge density alterations under thermal stimuli. Elution behavior of catecholamine derivatives from a copolymer-modified bead packed column was monitored using aqueous mobile-phase HPLC under varying temperature and pH. Catecholamine derivatives had higher retention times on poly(IPAAm-co-AAc) columns at higher pH in comparison with those on noncharged PIPAAm reference columns, suggesting an electrostatic interaction as a separation mode. Temperature also affected the retention behavior of catecholamine derivatives. Optimal separation of four catecholamine derivatives was achieved at elevated temperature, 50 degrees C, and at pH 7.0. This is due to the increased hydrophobicity of the stationary phase as evidenced by the elution of a nonionic hydrophobic steroid. From these results, mutual influences of both electrostatic and hydrophobic interactions between basic catecholamine derivatives and pH-/temperature-responsive surfaces are noted. Consequently, elution of weakly charged bioactive compounds is readily regulated through the modulation of stationary-phase thermoresponsive hydrophilic/hydrophobic and charge density changes.     

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.