Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

Effect of Coarse-Powder Portion on Abnormal Grain Growth during Hot Pressing of Commercial-Purity Alumina Powder

By classification, two powder portions, one consisting of coarse particles and the other consisting of fine particles, were separated from a MgO-doped (1000 ppm) commercial-purity Al₂O₃ powder. Examinations of microstructure evolution during hot pressing showed that extensive abnormal grain growth occurred for the coarse portion. For the fine portion, although there was an indication that grain-size distribution deviated from normal distribution on prolonged hot pressing, such extensive abnormal grain growth did not occur. Extensive abnormal grain growth also occurred when the coarse portion was mixed into a high-purity powder that exhibited no abnormal grain growth alone. Chemical analyses revealed that the coarse portion contained the higher concentration of impurities but lower concentration of magnesium than the fine portion. It was discussed that particle aggregates in the coarse portion might have been responsible for the higher concentration of impurities but lower concentration of magnesium and, thus, for the extensive abnormal grain growth.     

Visible-light photocatalytic activity of TiO2−x by heat treatment and plasma-heat treatment

The partial reduction of TiO₂ was attempted by heat treatment and plasma-heat treatment and it was carried out to investigate the photocatalytic characteristics of partially reduced TiO₂ (TiO_2?x) in the visible-light region. As a result, the plasma-heat treatment shows significantly stronger than the heat treatment for the visible-light photocatalytic activity of TiO₂. The red-shifted absorption bands in the visible-light region of TiO_2?x by plasma-heat treatment gave broader than one by heat treatment. The TiO_2?x by heat treatment and plasma-heat treatment was changed white to beige color, and white to navy, respectively.     

One‐shot radical polymerization of vinyl monomers with different reactivity accompanying spontaneous delay of polymerization for the synthesis of double‐network hydrogels

Double‐network hydrogels were conveniently synthesized by the one‐shot radical polymerization of an ionic monomer for the first network and a non‐ionic monomer for the second network in the presence of crosslinkers by simultaneous addition of the monomers, that is, one‐shot and spontaneous two‐step polymerization accompanying the delay of polymerization of a second network monomer. We analyzed the polymerization process based on the conversion of each monomer during the reaction in the absence of crosslinkers. Then we fabricated the double‐network hydrogels using several polymerization systems consisting of a conjugated monomer and a non‐conjugated monomer in the presence of the dual crosslinkers. We analyzed the swelling, mechanical and viscoelastic properties of hydrogels synthesized by one‐shot radical polymerization to confirm the production mechanism and the network structure of the hydrogels. © 2020 Society of Chemical Industry     

Synthesis of polyamide-hydroxyapatite nanocomposites

Simultaneous one-pot syntheses of PA66 and HAp were carried out by extracting H₂O and CO₂ from PA66 monomers and HAp raw materials, respectively, resulting in the formation of a polyamide (PA) 66-hydroxyapatite (HAp) nanocomposite. During the process, a spherical nano-sized HAp particle was precipitated following dissolution of micro-sized CaHPO₄・2H₂O. The PA66 monomers were subsequently adsorbed onto the generated HAp product. Some of the adsorbed PA66 monomers formed a bound polymer on HAp, and an increase in the adhesiveness of the PA66-HAp interface was observed as the polymerization progressed. During this process, the synthesis of a nanocomposite from a micro-sized raw material and creation of an autonomous strong interface between the matrix and filler was achieved. In addition, the shape of the resultant HAp was controllable and could be modified to needle shape by the addition of F⁻ and Mg²⁺ ions to the raw material. HAp could also be changed to plate shape via octa-calcium phosphate (OCP). Notably, during the synthesis, the filler shape of the nanocomposite could be controlled to 0D (particle), 1D (needle), and 2D (plate).     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.     

Cationic polymerization behavior of β‐methylglycidyl ether derivatives and physical properties of their cationically cured materials

β‐Methylglycidyl ethers have been applied to Electrical and Electronic adhesives. However, there is no report about the detailed polymerization behavior and physical properties of their cured products. Hence, we investigated cationic polymerization behavior of bisphenol A di(β‐methylglycidyl) ether (Me‐BADGE) and physical properties of the cured products containing Me‐BADGE. DSC analysis suggested that Me‐BADGE could be cured completely at lower temperature than bisphenol A diglycidyl ether (BADGE). Physical properties were analyzed by dynamic viscoelastic analysis. Glass transition temperature (T_g) of BADGE homopolymer was 194°C. In contrast, the copolymer of BADGE (50 wt %) with Me‐BADGE (50 wt %) showed T_g at 124°C. According to the data of E’ and tan δ, crosslink density of the cured products decreased with increasing the Me‐BADGE content. The analysis of cationic polymerization of monofunctional β‐methylglycidyl ether suggested that the cationic polymerization proceeded not only through oxonium cation but also through carbocation formed by ring‐opening reaction of oxonium cation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42377.     

Effect of glass transition temperature on heat‐responsive gas bubbles formation from polymers containing tert‐butoxycarbonyl moiety

Various types of polymers containing tert‐butoxycarbonyl (BOC) moiety as the typical protecting group of functional moieties have been used for the design of stimuli‐responsive polymer materials. In this study, we investigated the heat‐responsive deprotection behavior of BOC‐containing polymers obtained by radical polymerization of 4‐(tert‐butoxycarbonyloxy)styrene (BSt) and copolymerizations of BSt with styrene and methyl acrylate. The deprotection of BOC groups accompanying the evolution of isobutene and carbon dioxide as gaseous products was monitored by thermogravimetric analyses at different temperature circumstances; that is, on heating at a rate of 10 °C/min and under isothermal conditions at various temperatures. The deprotection resulted in a significant decrease in the transmittance of visible light due to the formation of a large number of gas bubbles, that is, foaming, in the polymer films when a heating temperature was close to the glass transition temperature of the used polymer. The potential of BOC‐containing polymers was also evaluated as the heat‐responsive adhesive polymers for dismantlable adhesion. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46252.     

<Emphasis Type="Italic">Brassica rapa</Emphasis> var. <Emphasis Type="Italic">japonica</Emphasis> Leaf Extract Mediated Green Synthesis of Crystalline Silver Nanoparticles and Evaluation of Their Stability,Cytotoxicity and Antibacterial Activity

Silver nanoparticles (AgNPs) were successfully synthesized from the reduction of Ag⁺ using AgNO₃ solution as a precursor and Brassica rapa var. japonica leaf extract as a reducing and capping agent. This study was aimed at synthesis of AgNPs, exhibiting less toxicity with high antibacterial activity. The characterization of AgNPs was carried out using UV–Vis spectrometry, energy dispersive X-ray spectrometry, fourier transform infrared spectrometry, field emission scanning electron microscopy, X-ray diffraction, atomic absorption spectrometry, and transmission electron microscopy analyses. The analyses data revealed the successful synthesis of nano-crystalline Ag possessing more stability than commercial AgNPs. The cytotoxicity of Brassica AgNPs was compared with commercial AgNPs using in vitro PC12 cell model. Commercial AgNPs reduced cell viability to 23% (control 97%) and increased lactate dehydrogenase activity at a concentration of 3 ppm, whereas, Brassica AgNPs did not show any effects on both of the cytotoxicity parameters up to a concentration level of 10 ppm in PC12 cells. Moreover, Brassica AgNPs exhibited antibacterial activity in terms of zone of inhibition against E. coli (11.1?±?0.5 mm) and Enterobacter sp. (15?±?0.5 mm) which was higher than some previously reported green-synthesised AgNPs. Thus, this finding can be a matter of interest for the production and safe use of green-AgNPs in consumer products.     

Stereo-Preference in the degradation of the erythro and threo isomers of β-O-4-type lignin model compounds in oxidation processes. part 2: In the reaction with hydroxyl and oxyl anion radicals under hydrogen peroxide bleaching conditions

We examined which isomer, the erythro or threo, of non-phenolic β-O-4-type lignin model compounds is stereo-preferentially attacked by hydroxyl radical and its conjugate base, oxyl anion radical, generated by the decomposition of hydrogen peroxide in the presence of ferric ion and its precipitates under hydrogen peroxide bleaching conditions. The intrinsic stereo-preference of oxyl anion radical was slightly toward the erythro isomer, while hydroxyl radical had a further smaller stereo-preference. These stereo-preferences can be explained by our prior knowledge that oxyl anion radical preferentially attacks the side-chain of the lignin model compounds rather than the aromatic nucleus. The amount of the degraded lignin model compounds became less great with decreasing pH, but reversely and intensively greater in the pH range below 10. This phenomenon can be attributed to the change in the decomposition mechanism of hydrogen peroxide accompanying the pH variation.