Determination of horseradish peroxidase concentration using the chemiluminescence of Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin-3-one

The chemiluminescence of the Cypridina luciferin analogue, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[1,2-a]pyrazin++ +-3-one (MCLA) was observed at 462 nm in the presence of horseradish peroxidase (HRP) and the total spectrum of light emitted was found to depend linearly on HRP concentration. Methods for the determination of HRP concentration using the chemiluminescence was investigated. HRP could be detected in the range from 100 pmol/L to 100 nmol/L under the optimum condition, H2O2 (10 mmol/L) and MCLA (10 mumol/L) at pH 5.8.     

Dynamics and organization of MAP kinase signal pathways

In the budding yeast, Saccharomyces cerevisiae, four separate but structurally related mitogen-activated protein kinase (MAPK) activation pathways are known. The best understood of these regulates mating. Pheromone binding to receptor informs cells of the proximity of a mating partner and induces differentiation to a mating competent state. The MAPK activation cascade mediating this signal is made up of Ste11 (a MEK kinase [MEKK]), Ste7 (a MAPK/ERK kinase [MEK]), and the redundant MAPK-related Fus3 and Kss1 enzymes. Another MAPK activation pathway is important for cell integrity and regulates cell wall construction. This cascade consists of Bck1 (a MEKK), the redundant Mkk1 and Mkk2 enzymes (MEKs), and Mpk1 (a MAPK). We exploited these two pathways to learn about the coordination and signal transmission fidelity of MAPK activation cascades. Two lines of evidence suggest that the activities of the mating and cell integrity pathways are coordinated during mating differentiation. First, cells deficient in Mpk1 are susceptible to lysis when they make a mating projection in response to pheromone. Second, Mpk1 activation during pheromone induction coincides with projection formation. The mechanism underlying this coordination is still unknown to us. Our working model is that projection formation generates a mobile second messenger for activation of the cell integrity pathway. Analysis of a STE7 mutation gave us some unanticipated but important insights into parameters important for fidelity of signal transmission. The Ste7 variant has a serine to proline substitution at position 368. Ste7-P368 has higher basal activity than the wild-type enzyme but still requires Ste11 for its function. Additionally, the proline substitution enables the variant to transmit the signal from mammalian Raf expressed in yeast. This novel activity suggests that Ste7-P368 is inherently more permissive than Ste7 in its interactions with MEKKs. Yet, Ste7-P368 cross function in the cell integrity pathway occurs only when it is highly overproduced or when Ste5 is missing. This behavior suggests that Ste5, which has been proposed to be a tether for the kinases in the mating pathway, contributes to Ste7 specificity and fidelity of signal transmission.     

Gas permeation property of polyaniline films

We examined the influence of polyaniline (PAn)'s unit sequence and doping with low molecular weight dopants or polymer dopants on permeation property. It was found that CO₂ permeability was increased by the formation of a quinonediimine unit in PAn with the oxidation. CO₂ sorption amount of PAn was decreased by oxidation. The increase of CO₂ permeability with oxidation, therefore, resulted from the increase of diffusivity, which was attributable to morphological variation by the increase of a quinonediimine unit. The permselectivity of PAn films was found to be remarkably improved by doping. In particular, the selectivity value of the PAn film doped with polyvinyl sulphonic acid as a polymer dopant went up to over 2,000. This remarkable increase of selectivity was found to result in the increase of selectivity, depending on diffusivity. It was also found that the permselectivity of the PAn film doped by polymer dopants was surpassed, as compared with that doped by low molecular dopants. © 1995 John Wiley & Sons, Inc.     

Study on modified phenolic resin. I. Modification with homopolymer prepared from p-hydroxyphenylmaleimide

We studied the improvement of heat resistance and mechanical properties of phenolic resin modified with polymers prepared from p-hydroxyphenylmaleimide (HPMI). Homopolymers of HPMI and copolymers of HPMI with some vinyl monomers were synthesized and M_n T_g and thermal decomposition temperature of them were measured by GPC, DSC, and TG, respectively. The miscibility of homopolymer with novolac was examined by DSC. It was found that the homopolymer had good heat resistance and good miscibility with novolac. Molding compounds were prepared by hot roll-kneading the mixtures of novolac, the homopolymer, hexamethylenetetramine, and glass fiber. It was found that molded test pieces had good heat resistance.     

Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Some theoretical aspects of the electrophoretic sedimentation of particles

This paper concerns the theoretical interpretation of the results of a previous experimental study of the sedimentation of oxidized fine aluminum and iron particles in waste kerosene under the influence of an electric field. Following the Kynch analysis of the mode of gravity sedimentation, a modified particle volume flux is introduced to compensate for the effect of the electric field strength. It is shown that if the local electric field strength at the settling interface is used as the true driving force for electrophoretic sedimentation, the settling curves can be predicted with reasonable accuracy, provided that electrical heating effects and consequent temperature changes in the system are taken into account.Some theoretical aspects of the effects of dielectric polarization on settling are also discussed and illustrated qualitatively by the experimental data. Finally, some of the factors which might be expected to affect the energy efficiency of a particle separator operating by electrophoretic sedimentation are considered.     

Preparation of modified poly(vinyl chloride) containing N,N-di(β-hydroxyethyl)dithiocarbamate and its reaction with metal ions

Reaction of N,N-di(β-hydroxyethyl)dithiocarbamate ion with poly(vinyl chloride) (PVC) was undertaken, and the reaction with metal ions of the polymer obtained was investigated. The effect of γ-irradiation on the reaction with metal ion was also studied. The modified PVC (PHDC) obtained from the reaction with N,N-di(β-hydroxyethyl)dithiocarbamate ion is pale yellow even after reaction at 100°C for 5 hr in dimethylformamide (DMF); it is soluble in dipolar solvents and its chlorine content is decreased considerably. This polymer reacted well with acetate salts of copper(II), nickel(II), zinc(II), and silver(I) heterogeneously in aqueous solution because of the introduction of hydrophilic groups (two hydroxy groups). The reactivity of the metal ions toward the polymer was of the order Ag(I) ? Cu(II) > Ni(II) > Zn(II). From the result of the reaction of γ-irradiated polymer with cupric ion, the polymer was judged to have fairly good antiradiation property.     

Efficient usage of highly dispersed Pt on carbon nanotubes for electrode catalysts of polymer electrolyte fuel cells

A Pt-deposited carbon nanotube (CNT) shows higher performance than a commercial Pt-deposited carbon black (CB) with reducing 60% Pt load per electrode area in polymer electrolyte fuel cells (PEFCs) below 500 mA/cm². K₂PtCl₄ and H₂PtCl₆·6(H₂O) are used for the Pt deposition onto multi-walled CNTs (MWCNTs), which are produced by the catalytic decomposition of hydrocarbons. The electric power densities produced using the Pt/CNT electrodes are greater than that of the Pt/CB by a factor of two to four on the basis of the Pt load per power. CNTs are thus found to be a good support of Pt particles for PEFC electrodes. TEM images show 2–4-nm Pt nanoparticles dispersed on the CNT surfaces. These high performances are considered to be due to the efficient formation of the triple-phase boundaries of gas–electrode–electrolyte. The mechanisms of Pt deposition are discussed for these Pt-deposited CNTs.     

Study on modified phenolic resin. II. Modification with p-hydroxyphenylmaleimide/styrene copolymer

The improvement of heat resistance and mechanical properties of phenolic resin was examined with the blend of novolac and copolymers prepared from p-hydroxyphenylmaleimide (HPMI) and styrene. Copolymers of HPMI and styrene with various molecular weights were synthesized. Glass transition (T_g) and thermal decomposition temperatures of the copolymers were measured by differential scanning calorimetry (DSC) and thermogravimetry (TG), respectively. The miscibility of the copolymers with novolac was examined by DSC. It was found that the copolymers had a good heat resistance and a good miscibility with novolac. Molding compounds were prepared by hot roll-kneading of mixtures that involved novolac, copolymer, hexamethylenetetramine (hexamine), and glass fiber. It was found that the test pieces prepared by transfer molding from the molding compounds showed a good heat resistance and better mechanical properties than phenolic resin modified with HPMI homopolymer.