Electron spin resonance spectroscopy studies on the free radical scavenging activity of wine anthocyanins and pyranoanthocyanins

Anthocyanins are a group of natural occurring pigments responsible for the red-blue color of grapes and many fruits and vegetables. Anthocyanins and derived pigments are of double interest, one technological, as they can be used as natural colorants, and another one due to their implication on human health through their antioxidant activity. Although there are numerous studies regarding the antioxidant activity of grape extracts as well as red wine, the free radical scavenging activity of purified anthocyanins and pyranoanthocyanins is largely unknown. In the present study, the hydroxyl and superoxide anion scavenging activities of anthocyanins and their pyruvic acid adducts were systematically investigated by electron spin resonance spectroscopy and spin trapping. The 3-glucosides of delphinidin, cyanidin, petunidin, pelargonidin and malvidin, and the pyruvic adduct of the 3-glucoside of delphinidin exhibited a potent superoxide anion radical scavenging and, to a lesser extent hydroxyl anion radical scavenging activity. The pyranoanthocyanins of cyanidin, petunidin, malvidin and pelargonidin showed a high capacity to scavenge superoxide anion radicals but did not scavenge hydroxyl radicals. Current data indicate that formation of anthocyanin adducts with pyruvic acid, which may occur during wine ageing or fruit juice processing, decreases the hydroxyl and superoxide anion scavenging and thus could decrease the antioxidant potential of these compounds.     

Detection of single-base mutations by fluorogenic ribonuclease protection assay

The ribonuclease protection assay is a generally applicable technique for the detection of known mutations. We have developed a simple and rapid method for mutation detection based on the ribonuclease protection assay using fluorescently labeled oligodeoxyribonucleotide probes. The fluorogenic ribonuclease protection (FRAP) assay uses two differently labeled oligodeoxyribonucleotides, a donor probe and an acceptor probe, to obtain a fluorescence resonance energy transfer (FRET) signal. We have utilized the FRAP assay for the detection of a single-base mutation in the YMDD motif of the hepatic B virus DNA polymerase gene. The occurrence of mismatch-selective RNA cleavage was successfully discriminated by measuring the FRET signal between the donor and acceptor probes. Moreover, mutation sensing was successfully visualized by a UV transillumination. This simple and rapid mutation sensing method should facilitate a high-throughput mutation analysis.     

Photoluminescence properties of CdS and CdMnS quantum dots prepared by a reverse-micelle method

We have investigated photoluminescence properties of CdS and CdMnS quantum dots (QDs) prepared by a reverse-micelle method. Before the surface modification, a broad luminescence band that originates from defects is dominant in CdS QDs. By the modification, the intensity of the band-edge luminescence is remarkably increased. The surface modification also causes drastic changes of decay profiles of the band-edge luminescence. The intensity of Mn2+ luminescence originating from the intra-3d shell transition of Mn2+ is also increased by the surface modification of CdMnS QDs. The decay time of the band-edge luminescence in surface-modified CdMnS QDs is faster than that in CdS QDs, which is due to the energy transfer from excitons to Mn2+.     

Elucidation of degradation mechanism of dioxins during mechanochemical treatment

Model dioxin compounds 4-chlorobiphenyl (4CB), octa-chlorodibenzo-p-dioxin (OCDD), and octachlorodibenzofuran (OCDF) were degraded by a mechanochemical (MC) process that involved milling with calcium oxide by use of a planetary ball mill. The degradation of 4CB produced mainly chloride ions and biphenyl, with the chlorine removal efficiency reaching about 100%. Biphenyl was transformed into terphenyls, quaterphenyls, cyclohexylbenzene, and bicyclohexyl through polymerization and hydrogenation reactions. Measurements of chloride ions after MC treatment of OCDD and OCDF showed about 100% dechlorination of both compounds; tetra- to heptachlorinated dibenzo-p-dioxins/furans (T4-H7CDD/Fs) were detected only at trace levels, and no other chlorinated organic compounds were observed. The residue after MC treatment was gray in color, indicating the possibility of carbonization, but the presence of amorphous graphite could not be confirmed.     

Characterization of AlF3 thin films at 193 nm by thermal evaporation

Aluminum fluoride (AlF3) was deposited by a resistive heating boat. To obtain a low optical loss and high laser-induced damage threshold (LIDT) at 193 nm, the films were investigated under different substrate temperatures, deposition rates, and annealing after coating. The optical property (the transmittance, refractive index, extinction coefficient, and optical loss) at 193 nm, microstructure (the cross-sectional morphology, surface roughness, and crystalline structure), mechanical property (stress), and LIDT of AlF3 thin films have been studied. AlF3 thin films deposited at a high substrate temperature and low deposition rate showed a lower optical loss. The highest LIDT occurred at the substrate temperature of 150 degrees C. The LIDT of the films prepared at a deposition rate of 2 A/s was higher than that at other deposition rates. The annealing process did not influence the optical properties too much, but it did increase the LIDT and stress.     

In-line type micropulse lidar with an annular beam: theoretical approach

An in-line type micropulse lidar (MPL) with an annular beam was designed and the transmitting and receiving characteristics were analyzed. Because the in-line MPL utilizes a common telescope for a transmitter and a receiver and the annular beam always overlaps with the receiver's field of view (FOV), it can measure near-range lidar echoes with a narrow FOV. The transmitting annular beam changes its shape to a nearly nondiffractive beam through propagation. It improves the spatial resolution of the lidar observation. The receiving characteristics showed the ideal lidar echo variation, which was inversely proportional to the square of the distance the beam propagated, even if it was in the near range.     

Influence of thermal annealing and ultraviolet light irradiation on LaF3 thin films at 193 nm

Lanthanum fluoride (LaF3) thin films were prepared by resistive heating evaporation and electron-beam gun evaporation under the same deposition rate, deposition substrate temperature, and vacuum pressure. The coated LaF3 films were then treated by heat annealing and UV light irradiation. The optical properties, microstructures, stress, and laser-induced damage threshold (LIDT) at a wavelength of 193 nm were investigated. The surface roughness, optical loss, stress, and LIDT of the films were improved after the annealing. The films had better properties when irradiated by UV light as compared with heat annealing.     

Stress protein assay for the evaluation of cytotoxicity of dental amalgam

To evaluate the cytotoxicity of mercury in dental amalgams, a stress protein assay was performed and the results were compared with the cytotoxicity evaluated by a neutral red uptake assay. The induction of a major stress protein, hsp70, was analyzed at levels of mRNA, synthesis and accumulation in human HeLa cells treated with extracts from amalgam, metal mercury and mercuric chloride. Mercuric chloride induced an increase in the synthesis of hsp70 at concentrations of mercury half those used for the neutral red uptake assay. The extracts from dental amalgam and metal mercury induced an increase in hsp70 mRNA at concentrations of mercury half those causing the inhibition of neutral red uptake into cells. Furthermore, the extracts from dental amalgam or metal mercury increased the synthesis of hsp70 and inhibited the uptake of dye at concentrations of mercury 1/10-1/50 lower than those at which mercuric chloride acted. These results suggest that the stress protein assay is more sensitive than the conventional neutral red assay for the evaluation of the cytotoxicity of mercury in dental amalgams and that the methods used in the preparation of metal solutions seem to be critical to the evaluation of cytotoxicity of dental materials.     

Fine SiC fiber synthesized from organosilicon polymers: relationship between spinning temperature and melt viscosity of precursor polymers

A very fine silicon carbide (SiC) fiber with diameter of 6 m, about a half of that of a commercially available SiC fiber, was synthesized from a polymer blend of polycarbosilane (PCS) and polyvinylsilane (PVS). The fine SiC fiber was obtained by optimizing the composition and the spinning temperature of PCS-PVS polymer blends. In order to determine these optimum conditions, the relationship between temperature and melt viscosities of the polymer blends was investigated. As a result, it was found that the optimum spinning temperature range was within a temperature range where the melt viscosity is 5–10 Pa · s. Moreover, by blending PVS with PCS, the spinning temperature of the polymer blends was lowered, the spinnability of polymer system was improved, and finer polymer fiber was obtained compared with PCS. The optimum content of PVS in the polymer blend was 15–20 wt%.     

A method of reducing the windage power loss in a laser scanner motor using spiral-groove aerodynamic thrust bearings functioning as a viscous vacuum pump

We propose a spiral-groove aerodynamic thrust bearing functioning as a viscous vacuum pump in a laser scanner motor to reduce the windage power loss of a polygon mirror. The proposed bearing pumps out the air in the scanner housing using the pumping effect of the spiral-groove thrust bearing, reducing the inner pressure of the housing. The pumping performances and the static characteristics of the spiral-groove thrust bearings were investigated numerically and experimentally. Two numerical calculation methods were used to study the pumping characteristics of the spiral-groove thrust bearing. It was found that a bearing with 15 spiral grooves reduced the inner pressure of the housing to <0.01 MPa at 20,000 rpm and at bearing clearance of 2.5 μm, and this has sufficient load-carrying capacity to support the rotating shaft and the mirror.